Bruksanvisning for 8Bitdo N30 trådløs kontroller for spillkontroll

Introduksjon

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your 8Bitdo N30 Wireless Controller Gamepad. Please read this manual carefully to ensure proper use and to maximize your gaming experience across various platforms including Android, PC, Mac OS, and Nintendo Switch.

Bilde: Topp view of the 8Bitdo N30 Wireless Controller, showcasing the D-pad on the left, A/B/X/Y buttons on the right, and Select/Start buttons in the center. The controller has a classic rectangular design with a black faceplate and red buttons.

Pakkeinnhold

Bekreft at alle varene er til stede i pakken din:

• 8Bitdo N30 Wireless Controller
• USB ladekabel
• Bruksanvisning (dette dokumentet)

Image: The 8Bitdo N30 Wireless Controller in its retail packaging. The box displays the controller's image and lists compatible platforms: Switch, Windows, Android, macOS, Steam, and features Bluetooth connectivity.

Oppsett

1. Lade kontrolleren

1. Connect the provided USB charging cable to the controller's micro-USB port.
2. Koble den andre enden av kabelen til en USB-strømkilde (f.eks. en USB-port på datamaskinen eller en USB-veggadapter).
3. The LED indicator on the controller will flash green during charging.
4. Når den er fulladet, vil LED-indikatoren bli blå.
5. En full lading tar vanligvis omtrent 1–2 timer.

2. Paring med enheter

The 8Bitdo N30 supports multiple pairing modes for different operating systems. Ensure the controller is sufficiently charged before attempting to pair.

2.1. Windows (X-input Mode)

1. Trykk og hold inne START knappen og X button simultaneously for 3 seconds to power on the controller in X-input mode. The LED will flash rapidly.
2. On your Windows PC, go to Bluetooth settings and select "Add Bluetooth or other device".
3. Choose "Bluetooth" and select "8Bitdo N30" from the list of available devices.
4. The LED on the controller will turn solid blue upon successful connection.
5. Note: You may need to repeat the START + X combination each time you power on the controller for Windows to ensure proper connection.

2.2. Android (D-input Mode)

1. Trykk og hold inne START knappen og B button simultaneously for 3 seconds to power on the controller in D-input mode. The LED will flash rapidly.
2. On your Android device, go to Bluetooth settings and enable Bluetooth.
3. Select "8Bitdo N30" from the list of available devices.
4. The LED on the controller will turn solid blue upon successful connection.

2.3. macOS (D-input Mode)

1. Trykk og hold inne START knappen og A button simultaneously for 3 seconds to power on the controller in D-input mode. The LED will flash rapidly.
2. On your macOS device, go to System Preferences > Bluetooth and enable Bluetooth.
3. Select "8Bitdo N30" from the list of available devices.
4. The LED on the controller will turn solid blue upon successful connection.

2.4. Nintendo Switch

1. Trykk og hold inne START knappen og Y button simultaneously for 3 seconds to power on the controller in Switch mode. The LED will flash rapidly.
2. On your Nintendo Switch, go to "System Settings" > "Controllers and Sensors" > "Change Grip/Order".
3. The Switch will search for controllers. Select "8Bitdo N30" when it appears.
4. The LED on the controller will turn solid blue upon successful connection.

Image: A person's hands holding the 8Bitdo N30 controller, demonstrating its compact size and ergonomic grip for gameplay.

Bruksanvisning

1. Slå på/av

• For å slå på: Trykk og hold inne START knappen i 1 sekund.
• For å slå av: Trykk og hold inne START knappen i 3 sekunder.
• The controller will automatically power off after 15 minutes of inactivity to conserve battery.

2. Knappeoppsett

The 8Bitdo N30 features a classic button layout with additional modern controls:

• D pad: Retningspute for bevegelse og menynavigasjon.
• A-, B-, X- og Y-knapper: Handlingsknapper.
• SELECT -knapp: Typically used for menu selection or specific game functions.
• Start knapp: Used for pausing games, confirming selections, and powering the device.
• L, R-knapper: Shoulder buttons located on the top edge of the controller.

Image: A person's hands holding the 8Bitdo N30 controller, viewed from a slight angle, highlighting the L and R shoulder buttons on the top edge.

Vedlikehold

• Rengjøring: Bruk en myk, tørr klut til å rengjøre kontrolleren. Unngå bruk av sterke kjemikalier eller slipende materialer.
• Lagring: Oppbevar kontrolleren på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
• Batteripleie: For å forlenge batterilevetiden, unngå å lade kontrolleren helt ut ofte. Lad den regelmessig, selv om den ikke er i konstant bruk.
• Fastvareoppdateringer: Periodically check the official 8Bitdo webnettsted for fastvareoppdateringer for å sikre optimal ytelse og kompatibilitet.

Image: The 8Bitdo N30 controller resting next to a protective carrying case, suggesting safe storage and portability.

Feilsøking

1. Controller Not Connecting/Frequent Disconnections

• Sørg for at kontrolleren er fulladet.
• Verify you are using the correct pairing mode for your device (e.g., START + X for Windows).
• On your device, remove "8Bitdo N30" from the list of paired Bluetooth devices and attempt to re-pair.
• Sørg for at ingen andre Bluetooth-enheter forstyrrer tilkoblingen.
• Try connecting the controller to a different device to isolate the issue.
• For Windows, remember to press START + X each time you power on the controller.

2. Unresponsive or Incorrect Button Presses

• Ensure the controller is properly paired and the connection is stable.
• Sjekk om det er fysiske hindringer eller rusk rundt knappene.
• Test the controller with different games or applications to determine if the issue is game-specific.
• Consider updating the controller's firmware from the official 8Bitdo webnettstedet.
• If experiencing issues on Android, try connecting to a Windows PC to see if the problem persists, as some Android devices may have compatibility quirks.

3. Kort batterilevetid

• Ensure the controller is fully charged before use (LED turns solid blue).
• The controller automatically sleeps after 15 minutes of inactivity; ensure it's not being left on unnecessarily.
• Battery performance can degrade over time with extensive use.

4. Controller Not Charging

• Verify the USB charging cable is securely connected to both the controller and the power source.
• Prøv å bruke en annen USB-kabel eller strømkilde.
• Ensure the power source is active and providing sufficient power.

Spesifikasjoner

Garanti og støtte

For detailed warranty information, please refer to the official 8Bitdo website or contact their customer support directly. Warranty terms and conditions may vary by region and retailer.

For further technical assistance or support, please visit the official 8Bitdo support page or contact their customer service team.