Thule 3107 takstativmonteringssett bruksanvisning

1. Introduksjon

This manual provides essential instructions for the proper installation, operation, and maintenance of your Thule 3107 Roof Rack Fitting Kit. The Thule 3107 kit is a vehicle-specific component designed to securely attach Thule Rapid System roof bar feet (models 753 or 751) to the existing attachment points on your vehicle's roof. Please read these instructions carefully before proceeding with installation to ensure safety and optimal performance.

An image showing the various components of the Thule 3107 Roof Rack Kit, designed for secure attachment of roof bars to specific vehicle models.

2. Sikkerhetsinformasjon

• Always ensure the kit is installed correctly and all fasteners are tightened according to the instructions.
• This kit is vehicle-specific. Do not attempt to install it on a vehicle for which it is not intended.
• Do not exceed the maximum load capacity of 70 kg (154 lbs) for the roof rack system, or the maximum load capacity specified by your vehicle manufacturer, whichever is lower.
• Regularly check the security of the roof rack system, especially before long journeys and after driving on rough roads.
• Be aware of the increased vehicle height and width when carrying loads on the roof.
• Distribute the load evenly and secure it properly to prevent shifting during transit.

3. Pakkens innhold

The Thule 3107 Roof Rack Fitting Kit includes a set of four components necessary for attaching Thule Rapid System feet to your vehicle. These components are specifically designed to interface with the existing attachment points on your car's roof.

• 4x Vehicle-specific mounting brackets/pads
• Necessary fasteners (bolts, washers, etc.)
• Instruction leaflet (refer to the main Thule Rapid System foot manual for complete installation details)

4. Oppsett og installasjon

The Thule 3107 kit is designed for easy clip-on attachment to your vehicle's roof. It is compatible with Thule Rapid System feet 753 or 751. Always refer to the detailed instructions provided with your Thule Rapid System feet for the complete installation process, as this kit is an integral part of that system.

1. Identifiser festepunkter: Locate the designated attachment points on your vehicle's roof. These are typically covered by small flaps or covers that need to be removed.
2. Prepare Kit Components: Match the specific components of the 3107 kit to the corresponding attachment points and Thule Rapid System feet.
3. Assemble Feet and Kit: Attach the Thule 3107 kit components to the Thule Rapid System feet (753 or 751) as per the instructions provided with the feet.
4. Mount to Vehicle: Carefully place the assembled roof rack feet with the 3107 kit onto the vehicle's attachment points. Ensure a precise fit.
5. Sikre festemidler: Tighten all fasteners evenly and securely using the appropriate tools. Do not overtighten.
6. Sluttsjekk: After installation, gently pull and push on the roof bars to ensure they are firmly attached and do not move. Re-check all fasteners.

For visual guidance, consult the official Thule installation videos or diagrams available on the Thule webnettstedet for your specific vehicle model and roof rack system.

5. Bruksanvisning

Once the Thule 3107 kit and associated roof bars are correctly installed, the system is ready for use. Ensure that any cargo placed on the roof bars is:

• Within Weight Limits: Never exceed the maximum load capacity of 70 kg or your vehicle's specified roof load limit.
• Evenly Distributed: Distribute the weight of your cargo as evenly as possible across the roof bars.
• Sikkert festet: Use appropriate straps, nets, or Thule accessories to secure your cargo firmly to prevent movement during transit.
• Aerodynamic: Position cargo to minimize wind resistance and noise.

Always drive cautiously, especially with a loaded roof rack, as it affects vehicle handling, braking, and fuel consumption.

6. Vedlikehold

Regular maintenance ensures the longevity and safety of your Thule 3107 Roof Rack Fitting Kit.

• Periodisk inspeksjon: Visually inspect all components of the kit and the roof rack system regularly for any signs of wear, damage, or corrosion.
• Sjekk festemidler: Periodically re-check the tightness of all bolts and fasteners, especially after the first few uses and after driving on rough terrain.
• Rengjøring: Clean the kit components with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the materials.
• Lagring: If removing the roof rack system for extended periods, store the kit components in a dry place away from direct sunlight.

7. Feilsøking

Should you encounter issues with your Thule 3107 kit, consider the following:

• Loose Fit/Movement: If the roof rack feels loose or moves, immediately stop driving. Re-check all installation steps, ensuring the kit components are correctly seated in the vehicle's attachment points and all fasteners are tightened to the specified torque.
• Manglende deler: Verify all components listed in the package contents are present. If parts are missing upon unboxing, contact your retailer or Thule customer support.
• Uvanlig støy: Wind noise can occur. Ensure all components are correctly installed and tightened. Check that no parts are vibrating or loose. Proper load distribution can also reduce noise.

For persistent issues or concerns, please contact Thule customer support or consult an authorized Thule dealer.

8. Spesifikasjoner

9. Garanti og støtte

For detailed information regarding the warranty for your Thule 3107 Roof Rack Fitting Kit, please refer to the official Thule website or the warranty documentation included with your purchase. Thule offers comprehensive support for its products.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Thule customer service through their official webnettsted: Thule Contact Us.