FtyCamPro provides mobile client software for operating generic network cameras, spy cams, and P2P video devices on iOS and Android.
FtyCamPro acts as the primary control interface for a wide range of Wi-Fi enabled security cameras, specifically focusing on compact "spy" cameras and portable camcorders. The brand's core product is its mobile application, which acts as the ecosystem for connecting, configuring, and monitoring generic camera hardware.
By connecting devices to the FtyCamPro app via UID codes or local AP hotspots, users can access real-time video streaming, manage loop recording settings, and receive motion detection alerts. The software is designed to bridge the gap between various low-cost generic camera hardware units and user-friendly mobile monitoring, supporting features like SD card playback and determining connection status via LED indicators.
Nieuwste handleidingen van manuals+ samengesteld voor dit merk.
Veelgestelde vragen over handleidingen, registratie en ondersteuning voor dit merk.
Ensure the device is powered on and flashing the correct indicator light (usually slow flashing for AP mode). Check that your phone is connected to the camera's hotspot initially before configuring the Wi-Fi.
The default P2P password is often 'admin' or just left blank. If you are prompted for a username and password you do not know, reset the camera to factory settings.
Press and hold the 'MODE' or 'RESET' button on the device for at least 5 seconds until the device restarts and the indicator lights change behavior.
Check if there is a protective plastic film on the lens and remove it. If the image remains vague, try rotating the lens manually to focus if the specific model supports manual focus adjustment.