AMETHEUS 10-inch Under Cabinet Motion Sensor Lights Instruction Manual

1. Product voorbijview

The AMETHEUS 10-inch Under Cabinet Lights are designed to provide convenient, motion-activated illumination for various indoor spaces. Featuring a powerful 1800mAh rechargeable battery, these wireless LED lights offer 5 levels of dimmable brightness and easy magnetic installation. They are ideal for kitchens, closets, bathrooms, pantries, and other areas requiring efficient, responsive lighting.

Belangrijkste kenmerken:

• Bewegingssensor: Automatically turns on when motion is detected within a 120° range and 10 feet in dark or low-light environments, turning off after 20 seconds of no movement.
• Upgraded Premium LEDs: Equipped with 26 high-efficiency LEDs, delivering up to 100 lumens of 6500K daylight-white illumination.
• 5 Levels Dimmable: Adjustable brightness settings (20%–100%) or stepless dimming via a long press to suit various lighting needs.
• 1800mAh oplaadbare batterij: Provides 7-31 days of use in Auto Mode (depending on usage) or 9 hours in Always-On Mode on a single 3-hour charge.
• Installatie zonder gereedschap: Built-in magnets allow attachment to metal surfaces, or use included adhesive iron plates for non-metal surfaces.

2. Inhoud van het pakket

Zorg ervoor dat alle onderdelen aanwezig zijn voordat u met de installatie begint.

• 2 x 10-inch Cabinet Lights (Cool White)
• 1 x USB-A to Dual USB-C Charging Cable
• 4 x Adhesive Iron Plates
• 1 x Gebruiksaanwijzing

3. Installatie en installatie

The AMETHEUS Under Cabinet Lights offer flexible, tool-free installation options.

Installatiestappen:

1. Bereid het oppervlak voor: Clean the desired installation area to ensure it is dry and free of dust or grease.
2. Magnetic Attachment (for metal surfaces): If installing on a metal surface (e.g., refrigerator, metal shelving), the built-in magnets will directly attach the light.
3. Adhesive Plate Attachment (for non-metal surfaces):
   • Peel off the protective backing from an adhesive iron plate.
   • Firmly press the adhesive side of the plate onto the cleaned non-metal surface.
   • Attach the light to the iron plate using its built-in magnets.
4. Positionering: Place the light in a location where the motion sensor has a clear line of sight to the area you wish to illuminate.

4. Gebruiksaanwijzing

The AMETHEUS lights feature a user-friendly design with simple controls for power, mode selection, and brightness adjustment.

Bedieningsknoppen:

• Power / Mode-knop:
  • Press once (x1): Activates Altijd aan-modus.
  • Press twice (x2): Activates Bewegingsgeactiveerde modus (light blinks twice to confirm).
  • Press three times (x3): Schakelt uit het licht.
• Helderheidsaanpassingsknop:
  • Short Press: Cycles through 5 preset brightness levels (20%, 40%, 60%, 80%, 100%).
  • Long Press: Activates traploos dimmen, allowing you to fine-tune brightness.

Functionaliteit van de bewegingssensor:

• In Motion Activated Mode, the light will turn on automatically when movement is detected in dark or low-light conditions.
• The sensor has a 120° detection angle and a range of up to 10 feet.
• The light will automatically turn off after 20 seconds if no further motion is detected.

5. Batterij en opladen

The lights are powered by a built-in 1800mAh rechargeable battery.

• Opladen: Use the provided USB-A to Dual USB-C Charging Cable to charge the lights. A full charge takes approximately 3 hours.
• Levensduur batterij: Expect 7-31 days of operation in Auto Mode, depending on the frequency of activation. In Always-On Mode, the battery lasts for about 9 hours at full brightness.
• Laadindicator: Refer to the charging indicator light on the device for charging status.

6. Onderhoud

To ensure optimal performance and longevity of your AMETHEUS lights, follow these simple maintenance guidelines:

• Schoonmaak: Wipe the light's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish or electronic components.
• Opladen: Recharge the battery when the light output appears dim or when the charging indicator suggests low battery. Avoid completely draining the battery for extended periods.
• Opslag: If storing the lights for an extended period, ensure they are fully charged and store them in a cool, dry place. Recharge periodically to maintain battery health.
• Waterbestendigheid: These lights are designed for indoor use and are niet waterbestendigVermijd blootstelling aan water of hoge luchtvochtigheid.

7. Probleemoplossing

If you encounter any issues with your AMETHEUS lights, refer to the following common troubleshooting steps:

• Licht gaat niet aan:
  • Ensure the battery is charged. Connect to the charging cable and check the indicator light.
  • Verify the light is in the correct mode (Always On or Motion Activated). Press the power button to cycle through modes.
  • If in Motion Activated Mode, ensure the environment is dark enough for the sensor to activate.
• Bewegingssensor werkt niet:
  • Check if the light is in Motion Activated Mode (blinks twice upon selection).
  • Zorg ervoor dat er geen obstakels zijn die de PIR-sensor blokkeren.
  • Confirm the ambient light is low enough for the sensor to function.
• Het licht is zwak:
  • Laad de batterij volledig op.
  • Adjust the brightness using the brightness adjustment button.
• Light Falls Off Surface:
  • Ensure the installation surface was clean and dry before applying adhesive plates.
  • If using adhesive plates, ensure they are firmly pressed and allowed sufficient time to bond before attaching the light.
  • For metal surfaces, ensure the magnetic connection is strong.

8. Specificaties

9. Garantie en ondersteuning

AMETHEUS provides a limited warranty for this product. For specific warranty details, claims, or technical support, please refer to the contact information provided with your purchase or visit the official AMETHEUS webplaats.

Bewaar altijd uw aankoopbewijs voor garantiedoeleinden.