Allteq TV/Screen Wall Mount with Arm

Invoering

Thank you for choosing the Allteq TV/Screen Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new wall mount. Please read this manual thoroughly before installation and keep it for future reference.

This wall mount is designed to securely hold flat-panel displays ranging from 23 to 42 inches and weighing up to 30 kg. Its articulated arm allows for versatile adjustments including swivel, tilt, and extension, providing optimal viewing angles from various positions in your room. It is compatible with VESA mounting patterns 50x50mm, 75x75mm, 100x100mm, and 200x200mm.

Veiligheidsinformatie

WAARSCHUWING: Improper installation or use of this product can result in serious personal injury or damage to the product or property. Allteq is not responsible for any damage or injury caused by incorrect installation, incorrect assembly, or incorrect use.

• Zorg ervoor dat het montageoppervlak het gecombineerde gewicht van de houder en het scherm veilig kan dragen.
• Gebruik altijd het juiste gereedschap en volg alle installatie-instructies zorgvuldig op.
• Overschrijd het maximale draagvermogen van 30 kg (66 lbs) niet.
• Do not exceed the maximum screen size of 42 inches.
• Dit product is uitsluitend bedoeld voor gebruik binnenshuis.
• Houd kinderen en huisdieren uit de buurt tijdens de installatie.
• Als u over een onderdeel van het installatieproces twijfelt, raadpleeg dan een gekwalificeerde professional.

Inhoud van het pakket

Please check to ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer for assistance.

• Wall Mount Assembly (Main Arm and VESA Plate)
• Bevestigingsmateriaal voor wandmontage (schroeven, pluggen)
• TV Mounting Hardware (Various VESA Screws, Spacers, Washers)
• Gebruiksaanwijzing

Specificaties

Instellen en installeren

Belangrijk: Before beginning installation, ensure you have all necessary tools and that the wall structure is suitable for mounting. It is highly recommended to have two people for installation.

Image: The Allteq TV/Screen Wall Mount, showing the wall-mounted base, the articulated arm, and the VESA mounting plate.

1. Selecteer montagelocatie: Choose a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing. Use a stud finder if mounting to wood studs.
2. Markeer de boorgaten: Hold the wall plate of the mount against the wall at the desired height and use a pencil to mark the drilling holes. Use a level to ensure it is perfectly horizontal.
3. Gaten boren: Drill pilot holes at the marked locations using an appropriate drill bit size for your wall type (wood stud, concrete, brick). Insert wall anchors if required for your wall type.
4. Muurplaat bevestigen: Secure the wall plate to the wall using the provided wall mounting screws. Ensure it is firmly attached and level.
5. Attach VESA Plate to TV: Carefully place your TV face down on a soft, clean surface. Attach the VESA mounting plate to the back of your TV using the appropriate VESA screws and spacers from the provided hardware kit. Ensure the screws are tightened securely but do not overtighten.
6. Mount TV to Arm: With assistance, carefully lift the TV with the attached VESA plate and hook it onto the arm of the wall mount. Secure it in place according to the mount's design (e.g., by tightening security screws or clips).
7. Kabelbeheer: Route cables neatly along the arm using any integrated cable management clips or ties.

Het bedienen van de berg

The Allteq wall mount offers flexible adjustments to optimize your viewervaring.

• Draaibaar: Gently push or pull the TV to rotate it horizontally left or right. The articulated arm allows for a wide range of swivel motion.
• Kantelen: To adjust the vertical tilt angle, loosen the tilt adjustment knobs or screws on the VESA plate (if applicable), adjust the screen to the desired angle, and then re-tighten the knobs/screws to secure the position.
• Uitbreiding/intrekking: Extend or retract the TV from the wall by gently pulling or pushing the articulated arm. This allows you to adjust the viewafstand.
• Niveau aanpassing: Some mounts allow for minor post-installation leveling. Refer to specific mechanisms on your mount if needed.

Always make adjustments smoothly and avoid sudden forceful movements to prevent damage to the mount or your TV.

Onderhoud

Regelmatig onderhoud garandeert een lange levensduur en veilige werking van uw wandhouder.

• Schoonmaak: Veeg de houder af met een zachte, droge doek. Gebruik geen schuurmiddelen of oplosmiddelen.
• Controleer verbindingen: Controleer regelmatig alle schroeven en bouten om er zeker van te zijn dat ze nog goed vastzitten. Draai ze indien nodig opnieuw vast, maar niet te vast.
• Controleer op schade: Regularly inspect the mount for any signs of wear, damage, or corrosion. If any damage is observed, discontinue use and contact customer support.

Probleemoplossing

Garantie en ondersteuning

Allteq products are manufactured to high quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Allteq website. Please have your model number (ALTQ-TM-165) and purchase details ready when contacting support.