1. Inleiding
The Cooler Master Synk X is an ergonomic real-time tactile immersion chair designed to enhance your entertainment experience. It converts sound waves into vibrations, providing tactile feedback for games, movies, and music. This manual provides essential information for the safe and efficient use of your Synk X chair.
Figure 1.1: Cooler Master Synk X Immersive Chair
2. Veiligheidsinformatie
Please read all safety instructions carefully before using the Synk X chair. Failure to follow these instructions may result in injury or damage to the product.
- Gewichtslimiet: This product has a maximum weight recommendation of 275 pounds (125 kg). Exceeding this limit could result in damage to the chair or pose a risk of injury.
- Energiebron: Gebruik voor het opladen uitsluitend de meegeleverde stroomadapter.
- Plaatsing: Ensure the chair is placed on a stable, level surface. Avoid placing it near heat sources or in direct sunlight.
- Schoonmaak: Refer to the maintenance section for proper cleaning procedures. Do not use abrasive cleaners or immerse electrical components in water.
- Kinderen: Keep children and pets away from the chair during operation and assembly.
- Wijzigingen: Do not attempt to modify or disassemble the chair. Unauthorized modifications may void the warranty and pose safety risks.
3. Inhoud van het pakket
Controleer of alle onderstaande artikelen in uw pakket aanwezig zijn:
- Synk X Chair (Seat and Backrest)
- Stoelbasis
- Gasliftcilinder
- 5 zwenkwielen
- Lendenkussen
- Armleuningen (2)
- Stroomadapter
- Bluetooth Transceiver (optional accessory)
- Auxiliary Cables
- Montageset (schroeven, ringen, inbussleutel)
- Gebruiksaanwijzing
Video 3.1: Uitpakken en meerview van de meegeleverde componenten.
4. Instellen
Follow these steps to assemble your Cooler Master Synk X chair:
- Bevestig de zwenkwielen aan de basis: Insert each of the five caster wheels into the openings at the ends of the chair base until they click securely into place.
- Gaslift invoegen: Plaats de gasveer in het middelste gat van de stoelbasis.
- Armleuningen bevestigen: Secure the armrests to the underside of the seat using the provided screws from the hardware kit. Ensure they are firmly attached.
- Bevestig de stoel aan de gaslift: Carefully align the central mechanism on the underside of the seat with the top of the gas lift cylinder and press down firmly until the seat is securely seated.
- Rugleuning bevestigen: Connect the backrest to the seat assembly using the remaining screws. Ensure all connections are tight.
- Kabels aansluiten: Locate the internal cables for the haptic system and RGB lighting. Connect them according to the diagrams in the included user manual.
- Bevestig het lendenkussen: Position the lumbar pillow on the backrest for ergonomic support.
Video 4.1: Visual guide for chair assembly.
Figure 4.1: Fully assembled Cooler Master Synk X chair.
5. Gebruiksaanwijzing
The Synk X chair features an intuitive control panel for managing its functions.
5.1 Configuratiescherm voorbijview
Afbeelding 5.1: Gedetailleerd view van het bedieningspaneel.
- Gelijkstroom 19V IN: Power input for charging the chair's internal battery. A full charge takes approximately 6 hours and provides 4 hours of battery life.
- Indicatoren batterijstatus: LEDs display the current battery charge level.
- AUX-IN: 3.5mm auxiliary input for wired audio sources.
- Koppelingsknop: Initiates Bluetooth pairing mode for wireless audio connections.
- Selecteer knop: Cycles through different audio input modes (AUX, Bluetooth, 5.8G).
- Koptelefoon aansluiting: 3.5mm output for connecting wired headphones.
- Volumeknoppen: Adjust master volume and headphone volume.
- Vibration Level Knob: Controls the intensity of the tactile feedback.
- ARGB Button: Cycles through various RGB lighting modes and colors.
- Aan/uit-knop: Turns the chair on or off.
Video 5.1: Demonstration of the control panel functions.
5.2 Tactile Immersion
The Synk X converts audio signals into real-time vibrations, providing a dynamic tactile experience. Adjust the 'Vibration Level' knob to customize the intensity.
Video 5.2: Demonstration of the chair's vibration mode with a bowl of water.
5.3 RGB-verlichting
The chair features customizable RGB lighting on the backrest. Press the 'ARGB' button on the control panel to cycle through various lighting effects and colors.
Figure 5.2: RGB lighting on the Synk X chair.
Video 5.3: Demonstration of RGB lighting modes.
5.4 Ergonomische aanpassingen
The Synk X chair offers multiple adjustments for personalized comfort:
- Zithoogte: Use the lever located under the seat to adjust the chair's height.
- Lighoek: The backrest can recline up to 135 degrees. Use the recline lever to find your preferred angle.
- Retractable Leg Rest: Pull out the leg rest from under the seat for extended comfort.
Figure 5.3: Ergonomic adjustments including recline and leg rest.
6. Onderhoud
Proper care will extend the life of your Synk X chair:
- Schoonmaak: Schoonmaken met advertentieamp lap. Gebruik geen agressieve chemicaliën of schurende materialen.
- morsen: Bij morsen de plek onmiddellijk deppen met een schone, droge doek.
- De stoel verplaatsen: Til de stoel op in plaats van hem te slepen wanneer u hem verplaatst, om schade aan de voet en de vloer te voorkomen.
- Opslag: Bewaar de stoel op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
7. Probleemoplossing
If you encounter issues with your Synk X chair, refer to the following common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| No power/Chair not turning on | De batterij is leeg. De stroomadapter is niet aangesloten. De aan/uit-knop is niet ingedrukt. | Connect the power adapter and charge the chair. Ensure the power button is pressed firmly. |
| No tactile feedback/vibration | Vibration level set too low; Audio source not connected or playing; Cables are loose. | Increase the vibration level using the knob. Verify the audio source is connected and playing. Check all internal cable connections. |
| Problemen met Bluetooth-koppeling | Chair not in pairing mode; Device too far; Interference. | Press the pairing button on the control panel. Ensure your device is within range. Reduce interference from other wireless devices. |
| RGB-verlichting werkt niet | Lighting off; Cable connection loose. | Press the ARGB button to cycle through modes. Check the RGB cable connection. |
| De stoel voelt instabiel of wiebelig aan. | Loose screws; Uneven floor. | Controleer en draai alle montageschroeven vast. Zorg ervoor dat de stoel op een vlakke, egale ondergrond staat. |
8. Specificaties
- Merk: Koelere Meester
- Modelnaam: Synchroniseer X
- Artikelmodelnummer: IXC-SX1-I-US1
- Kleur: Lunar Gray
- Materiaal: Polycarbonaat
- Artikelgewicht: 80.8 pond (36.74 kg)
- Productafmetingen (LxBxH): 22 x 26.25 x 37 inch
- Aanbeveling maximumgewicht: 275 pond (125 kg)
- Terug stijl: Open rug
- Speciale eigenschap: Ergonomic, Rolling, Tactile Immersion
- Aanbevolen toepassingen: Gamen
- Aantal liggende posities: More than one (up to 135 degrees)
- Connectiviteit: Bluetooth, AUX, 5.8G (with optional transceiver)
- Levensduur batterij: Ongeveer 4 uur gebruik op een volle accu.
- Oplaadtijd: Ongeveer 6 uur
9. Garantie en ondersteuning
For warranty information and customer support, please refer to the official Cooler Master webwebsite of neem contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs voor garantieclaims.
Online hulp: Visit the Cooler Master support page for FAQs, drivers, and contact options.
Contactgegevens: Refer to the Cooler Master website voor regionale contactgegevens.