1. Inleiding
The LogiLink 4K 2x2 port bidirectional HDMI switch allows you to connect two (2) HDMI sources, such as a video camera, Blu-ray player, satellite receiver, digital video recorder, set-top boxes, or game consoles, to two (2) HDMI-compatible displays. This switch can simultaneously route one of the two HDMI input signals to two (2) UHD displays. The integrated Downscaler function supports displaying 4K content on Full HD screens, and both 4K and Full HD screens can operate simultaneously. This smart switch ensures no compromise on image and sound quality. 4K/UHD image signals are transmitted without loss, with HDCP 2.2/1.4, HDR, and 3D support. Audio transmission in LPCM 7.1, DTS, Dolby Digital, DTS-HD Master Audio, and Dolby TrueHD meets all your audio needs.
2. Producteigenschappen
- Allows switching between two HDMI signal sources to two displays/TVs simultaneously.
- Compliant with HDMI 2.0, offering a bandwidth of 6 Gbit/s at 600 MHz per line (18 Gbit/s total).
- Connections: 2 x HDMI A inputs, 5V DC power input; Outputs: 2 x HDMI A.
- Supports Ultra HD 4K/60 Hz YUV 4:4:4 and Full 3D.
- Supports 36-bit Deep Color (12 bits per channel).
- Supports EDID Pass-Through.
- Supports HDCP 1.4/2.2, HDR, and Downscaler functionality.
- Supports uncompressed audio like LPCM 7.1.
- Supports compressed audio data such as DTS, Dolby Digital (including DTS-HD Master Audio and Dolby TrueHD).
- Duurzaam metaal casing, dimensions: 11.6 x 5.2 x 2.3 cm.
3. Inhoud van het pakket
Controleer het pakket op de volgende items:
- LogiLink HD0039 2x2 Port Bidirectional HDMI Switch
- 5V DC voedingsadapter
- Gebruiksaanwijzing
4. Apparaat voorbijview
5. Installatie-instructies
- Apparaten uitschakelen: Before making any connections, ensure all HDMI source devices (e.g., Blu-ray player, game console) and display devices (e.g., TV, monitor) are powered off.
- HDMI-bronnen aansluiten: Connect your HDMI source devices to the HDMI IN 1 and HDMI IN 2 ports on the LogiLink HD0039 switch using high-quality HDMI cables.
- HDMI-schermen aansluiten: Connect your HDMI display devices to the HDMI OUT 1 and HDMI OUT 2 ports on the switch using high-quality HDMI cables.
- Sluit de voedingsadapter aan: Insert the 5V DC power adapter into the DC 5V port on the switch, then plug the adapter into a power outlet. The power LED on the switch should illuminate.
- Apparaten inschakelen: Power on your display devices first, then power on your HDMI source devices.
- Select Input/Output: Use the 'SOURCE' button on the front panel to select the desired input source (IN 1 or IN 2) and the 'SWITCH' button to toggle between output configurations.
6. Gebruiksaanwijzing
The LogiLink HD0039 switch offers flexible control for managing your HDMI signals.
6.1. Schakelen van ingangen
- Druk op de BRON button on the front panel to cycle between HDMI IN 1 and HDMI IN 2. The corresponding LED indicator (IN 1 or IN 2) will light up to show the currently selected input.
6.2. Switching Outputs
- Druk op de SCHAKELAAR button on the front panel to control which output ports receive the selected input signal. This switch allows you to send the selected input to OUT 1, OUT 2, or both simultaneously.
6.3. HDMI Version Selection
- A small switch labeled 1.4 / 2.0 is located on the front panel. This allows you to manually select the HDMI version. For 4K/60Hz content and HDR, ensure this switch is set to 2.0. For compatibility with older devices, you may switch to 1.4 indien nodig.
6.4. Selectie audiomodus
- De GELUID button allows you to select the audio mode. Refer to the LED indicators (HIGH/LOW) for the current audio setting. This feature can be used to optimize audio output for different display capabilities.
7. Onderhoud
- Schoonmaak: Gebruik een zachte, droge doek om het apparaat schoon te maken. Gebruik geen vloeibare reinigingsmiddelen of spuitbussen.
- Ventilatie: Zorg ervoor dat het apparaat in een goed geventileerde ruimte staat om oververhitting te voorkomen. Blokkeer geen ventilatieopeningen.
- Omgeving: Houd het apparaat uit de buurt van extreme hitte, vochtigheid, stof en direct zonlicht.
- Stroom: Always use the provided 5V DC power adapter. Disconnect the power adapter if the device will not be used for an extended period.
8. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Geen afbeelding weergegeven. |
|
|
| Slechte beeldkwaliteit of flikkering. |
|
|
| Geen geluid. |
|
|
| 4K content not displaying correctly on Full HD screen. | Downscaler not active or issue. | Ensure the Downscaler function is enabled (it is integrated and should work automatically). If issues persist, try restarting all devices. |
9. Specificaties
| Functie | Specificatie |
|---|---|
| Merk | LogiLink |
| Modelnummer | HD0039 |
| Kleur | Zwart |
| Aansluitingstype | HDMI |
| Aantal poorten | 2 ingangen, 2 uitgangen |
| Compatibele apparaten | Camera, Blu-ray Player, DVD Player, Television |
| HDMI-standaard | HDMI 2.0 (backward compatible with 1.4) |
| Bandbreedte | 18 Gbit/s (6 Gbit/s per line at 600 MHz) |
| Resolutie Ondersteuning | Up to 4K/60 Hz YUV 4:4:4, Full 3D |
| Kleurdiepte | 36-bits diepe kleur (12 bits per kanaal) |
| HDCP-ondersteuning | HDCP 1.4 / 2.2 |
| HDR-ondersteuning | Ja |
| EDID-ondersteuning | EDID-doorvoer |
| Audio-ondersteuning | LPCM 7.1, DTS, Dolby Digital, DTS-HD Master Audio, Dolby TrueHD |
| Downscaler Function | Integrated (4K to Full HD) |
| Stroomvoorziening | 5V gelijkstroom |
| Casing Materiaal | Metaal |
| Afmetingen (L x B x H) | 11.6x5.2x2.3cm |
| Fabrikant | 2direct GmbH |
| Land van herkomst | China |
10. Garantie en ondersteuning
LogiLink-producten zijn ontworpen voor betrouwbaarheid en prestaties. Voor specifieke garantie-informatie kunt u de garantiekaart raadplegen die bij uw product is meegeleverd of de officiële LogiLink-website bezoeken. website. For technical support or assistance, please contact your retailer or LogiLink customer service.
Spare parts availability and software update guarantees are not available for this product.