farexon Electric Standing Desk User Manual

1. Product voorbijview

The farexon Electric Standing Desk is designed to provide a versatile and ergonomic workspace, allowing users to easily switch between sitting and standing positions. This model features a 55 x 24 inch desktop in Oak Grey, equipped with an electric lifting system, memory presets, and anti-collision technology for safe and convenient operation. It is suitable for various environments including home offices, study rooms, and commercial settings.

Figure 1.1: The farexon Electric Standing Desk in an office setup, showcasing its spacious desktop and integrated features like the mouse pad and headphone hook.

2. Veiligheidsinformatie

Please read all safety instructions carefully before assembly and operation to prevent injury or damage to the product. Keep this manual for future reference.

• Ensure anti-collision technology is enabled during operation to prevent injuries or damage. The desk will move approximately 2cm in the opposite direction if an obstacle is detected during height adjustment.
• Verify that the desk meets U.S. federal and state safe air standards for reduced formaldehyde and VOC emissions.
• Do not place excessive weight on the desk. The maximum recommended weight is 178 pounds.
• Houd kinderen en huisdieren uit de buurt van het bureau tijdens gebruik.
• Ensure all cables are properly managed to avoid entanglement or damage during height adjustments.
• Gebruik uitsluitend de meegeleverde voedingsadapter en componenten.

3. Inhoud van het pakket

Before beginning assembly, please ensure all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

• Desktop (Oak Grey, 55 x 24 inches)
• Electric Lifting Columns (2 pcs)
• Desk Feet/Bases (2 pcs)
• Bedieningspaneel met LED-display
• Voedingsadapter en kabel
• Large Mouse Pad (36 x 16 inches)
• Rolling Wheels (4 pcs, lockable)
• Foot Pads (4 pcs, non-slip)
• Headphone Hooks (2 pcs)
• Wire Collecting Hole Cover
• Montagemateriaal (schroeven, bouten, enz.)
• Montagegereedschap (inbussleutel, enz.)
• Gebruikershandleiding (dit document)

Figure 3.1: Key components and features of the desk, such as the wire collecting hole, rolling wheels, protective edge, and metal headphone hooks.

4. Montage-instructies

Assembly typically requires two people. Follow the steps below. A detailed installation video is also available for visual guidance.

1. Bereid de werkruimte voor: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desktop from scratches.
2. Hefkolommen aan het bureaublad bevestigen: Carefully place the desktop upside down. Align the electric lifting columns with the pre-drilled holes on the underside of the desktop and secure them using the provided screws.
3. Install Desk Feet/Bases: Attach the desk feet to the bottom of the lifting columns. Decide whether to install the rolling wheels or the non-slip foot pads. The wheels offer mobility, while the foot pads provide stationary stability. Secure your chosen option with the appropriate hardware.
4. Connect Control Panel and Motor: Mount the control panel to the underside of the desktop in the designated area. Connect the motor cables from the lifting columns to the control panel, ensuring a secure fit. Connect the power adapter to the control panel.
5. Accessoires installeren: Attach the headphone hooks to the desired location on the underside of the desk. Insert the wire collecting hole cover into the desktop opening.
6. Draai het bureau om: Draai het gemonteerde bureau met hulp voorzichtig rechtop.
7. Initial Power-Up and Calibration: Plug the power cable into a wall outlet. The desk may perform an initial calibration cycle. Follow any on-screen prompts on the LED display.

Figure 4.1: A fully assembled farexon Electric Standing Desk, ready for use in a home office environment.

5. Gebruiksaanwijzing

The farexon Electric Standing Desk features an intuitive control panel for easy height adjustment and memory functions.

5.1. Functies van het bedieningspaneel

Figure 5.1: The smart LED controller with its various buttons and display.

• Led scherm: Geeft de huidige hoogte van het bureau in inches weer.
• Pijlen omhoog/omlaag (^ / v): Press to adjust the desk height incrementally. Hold to continuously move the desk up or down.
• Geheugenknoppen (1, 2, 3, 4): These buttons allow you to save and recall up to four preferred height settings.

5.2. Geheugenvoorinstellingen instellen

1. Pas de hoogte van het bureau aan met behulp van de pijlen omhoog/omlaag.
2. Press and hold one of the Memory Buttons (1, 2, 3, or 4) until the LED display flashes or beeps, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding Memory Button (1, 2, 3, or 4). The desk will automatically move to the saved position.

5.3. Anti-botsingstechnologie

The desk is equipped with an anti-collision system to prevent damage or injury. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse approximately 2cm. This feature is designed to protect both the desk and its surroundings.

Figure 5.2: The desk's quiet operation and anti-collision feature ensure smooth and safe height adjustments.

6. Onderhoud

Regular maintenance will help prolong the life and performance of your farexon Electric Standing Desk.

• Schoonmaak: Veeg het bureaublad en het frame schoon met een zachte, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Ensure the desk is unplugged before cleaning electrical components.
• Kabelbeheer: Periodically check and organize cables to prevent tangling or interference with the lifting mechanism.
• Motorinspectie: While the motor is designed for durability (tested for 50,000 cycles), avoid overloading the desk. Listen for unusual noises during operation, which may indicate an issue.
• Wheel/Foot Pad Check: If using wheels, ensure they are clean and roll smoothly. If using foot pads, ensure they are securely attached and provide stable support.

Figure 6.1: The robust motor designed for long-term reliability and safety features.

7. Probleemoplossing

If you encounter any issues with your farexon Electric Standing Desk, refer to the following common problems and solutions. If the problem persists, contact customer support.

8. Productspecificaties

Figure 8.1: The adjustable height range of the desk accommodates various user preferences and postures.

9. Garantie en ondersteuning

farexon is committed to providing high-quality products and excellent customer service.

• Garantie: Op dit product geldt een beperkte garantie. Raadpleeg de garantiekaart in uw verpakking voor de specifieke voorwaarden.
• Retourneren: The product is eligible for 30-day easy returns from the date of purchase.
• Klantenservice: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact the farexon customer service team. Contact information can typically be found on the product packaging or the official farexon webplaats.

Figure 9.1: farexon's dedicated customer support team is available to assist you.