1. Veiligheidsinformatie
Please read these instructions carefully before installation and retain them for future reference. Improper installation or use can lead to electrical shock, fire, or other hazards.
- Always turn off the power supply at the main circuit breaker before beginning any electrical work.
- This product must be installed by a qualified electrician or a person with sufficient electrical knowledge.
- Zorg ervoor dat de voltage supply (110V) matches the requirements of the fixture.
- Wijzig het armatuur op geen enkele manier.
- Houd het armatuur uit de buurt van brandbare materialen.
- This fixture is designed for indoor use only and is not water-resistant.
2. Inhoud van het pakket
Controleer vóór de installatie of alle onderdelen aanwezig en onbeschadigd zijn.
- Small LED Ceiling Light (1 unit)
- Installation Accessories (screws, wire nuts)
- Gebruiksaanwijzing
- Montagemateriaal
3. Productspecificaties
| Functie | Specificatie |
|---|---|
| Modelnummer | CL-JCYXBK-US |
| Afmetingen | 9.8"L x 9.8"W x 9.4"H (D25*H24 cm) |
| Stroom | 30W |
| Deeltage | 110V |
| Lichte kleur | Warm wit (3000K) |
| Helderheid | 2400 Lumen |
| Materiaal | Acrylic, Aluminum, Metal |
| Installatietype | Inbouw |
| Binnen-/buitengebruik | Binnen |
| Artikelgewicht | 1.48 pond |
Note: The ceiling light cannot switch color temperature or adjust brightness.
4. Installatie-instructies
Follow these steps for safe and proper installation.
- Schakel de stroom uit: Locate the circuit breaker controlling the light fixture's power and turn it off. Verify power is off using a voltagen tester.
- Montageoppervlak voorbereiden: Ensure the ceiling junction box is securely mounted and capable of supporting the fixture's weight.
- Montagebeugel bevestigen: Secure the mounting bracket (included) to the junction box using the provided screws. Ensure it is firmly attached.
- Draadverbindingen: Connect the fixture's wires to the corresponding house wires using the provided wire nuts.
- Connect the black wire (live) from the fixture to the black wire (live) from the ceiling.
- Connect the white wire (neutral) from the fixture to the white wire (neutral) from the ceiling.
- Connect the green or bare copper wire (ground) from the fixture to the ground wire from the ceiling.
- Bevestig het armatuur: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure no wires are pinched during this step.
- Herstel de stroom: Zodra het armatuur stevig is geïnstalleerd, schakelt u de stroom weer in via de stroomonderbreker.
Image: Electrical wiring connections for ceiling light installation. Connect black to black, white to white, and ground to ground.
Image: Attaching the mounting bracket to the ceiling junction box.
5. Gebruiksaanwijzing
This LED ceiling light is designed for simple operation.
- Once installed and power is restored, operate the light using a standard wall switch connected to the fixture's circuit.
- The light will turn on/off with the flip of the wall switch.
- This fixture provides a fixed warm white (3000K) light and does not support dimming or color temperature adjustment.
6. Onderhoud
Regelmatig onderhoud zorgt ervoor dat uw verlichtingsarmatuur optimaal presteert en lang meegaat.
- Schoonmaak: Before cleaning, ensure the power is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- Lamp vervangen: This fixture uses integrated LED chips and does not require bulb replacement.
7. Probleemoplossing
Als u problemen ondervindt met uw verlichtingsarmatuur, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Het licht gaat niet aan | Geen stroomvoorziening Losse bedrading verbinding Defecte wandschakelaar | Check circuit breaker. Ensure power is on. Turn off power, check wire connections for tightness. Test of vervang de wandschakelaar. |
| Licht flikkert | Losse bedrading verbinding Incompatible dimmer switch (this fixture is not dimmable) | Schakel de stroom uit en controleer de draadverbindingen. Ensure a standard ON/OFF wall switch is used. Remove any dimmer switches. |
| Het licht is zwak | Onjuiste voltage Fixture not designed for higher brightness | Verifieer voltage supply is 110V. This fixture has a fixed brightness of 2400 lumens. |
Als het probleem blijft bestaan nadat u deze oplossingen hebt geprobeerd, neem dan contact op met de klantenservice.
8. Garantie en ondersteuning
This CANEOE LED Hallway Light comes with a één jaar garantieservice vanaf de aankoopdatum.
If you have any questions, concerns, or require assistance with your product during the warranty period, please contact the seller or CANEOE customer support. Provide your model number (CL-JCYXBK-US) and proof of purchase for faster service.
For further assistance, please visit the CANEOE store on Amazon: CANEOE Store