EPEVER 3000W

EPEVER 3000W Pure Sine Wave Inverter Instruction Manual

Model: 3000W | Brand: EPEVER

1. Inleiding

This manual provides essential information for the safe and efficient operation of your EPEVER 3000W Pure Sine Wave Inverter. This inverter converts 24V DC power to 110V AC power, suitable for various off-grid applications. It features a double closed-loop control algorithm for fast response and load impact resistance, ensuring stable and reliable power output.

Belangrijkste kenmerken zijn:

  • 3000W continuous power output, 6000W surge power for 5 seconds.
  • Geschikt voor 24V lithium- en loodzuuraccu's.
  • Rotatable LCD meter for monitoring and parameter configuration.
  • Remote control capability via phone apps and PC software.
  • Built-in electronic safeguards for comprehensive protection.
EPEVER 3000W Pure Sine Wave Inverter overview
Figuur 1: Overview of the EPEVER 3000W Pure Sine Wave Inverter, highlighting its compatibility with 24V lithium and lead-acid batteries, 6000W surge power, remote control, and compliance with IEC62109, EN61000, RoHS standards.

2. Veiligheidsinstructies

Lees alle veiligheidsinstructies zorgvuldig door vóór installatie en gebruik. Het niet opvolgen van deze instructies kan leiden tot een elektrische schok, brand of ernstig letsel.

  • Zorg voor een goede aarding van de omvormer.
  • Do not expose the inverter to rain, snow, spray, or excessive dust.
  • Installeer de omvormer in een goed geventileerde ruimte om oververhitting te voorkomen.
  • Open de omvormer niet casing; er bevinden zich geen onderdelen in die door de gebruiker kunnen worden onderhouden.
  • Disconnect all power sources before performing any wiring or maintenance.
  • Use appropriate wire gauges for all connections to prevent overheating and ensure efficient power transfer.
  • Houd kinderen uit de buurt van de omvormer en de aansluitingen ervan.
Built-in electronic safeguards of the EPEVER inverter
Figure 2: The inverter includes built-in electronic safeguards such as input reverse polarity protection, inverter over temperature protection, over voltage protection, input voltage protection, overload protection, and output short circuit protection to prevent damage from installation errors or system failures.

3. Productcomponenten

Familiarize yourself with the various parts of your EPEVER inverter:

EPEVER Inverter component diagram
Figure 3: Detailed diagram of the inverter's components. 1. DC input terminal positive, 2. DC input terminal negative, 3. Cooling fan, 4. LCD, 5. AC outlet, 6. RS485 communication port, 7. USB output port 5VDC/Max.1A, 8. External switch port, 9. Inverter switch, 10. Grounding terminal.

4. Installatie en installatie

Volg deze stappen voor een correcte installatie van uw omvormer:

4.1 Montage

  • Kies een droge, goed geventileerde plek, uit de buurt van direct zonlicht en warmtebronnen.
  • Ensure adequate clearance around the inverter for airflow (minimum 150mm on all sides for air intake and outlet).
  • Mount the inverter securely to a stable surface using appropriate fasteners.

4.2 bedradingsverbindingen

The inverter features a push-on terminal design for easy wire installation without a screwdriver for the AC output. For DC input, use the screw terminals.

EPEVER Inverter wiring installation with push-on terminals
Figure 4: Wiring installation demonstrating the push-on terminal design for AC output. For multi-stranded wires, add solder to the connection point before inserting into the corresponding port. To remove, stop the inverter, insert a sharp tool into the small hole, and pull out the wiring.
  1. Aarding: Sluit de aardingsaansluiting (10) aan op een aardingspunt.
  2. DC-ingang: Connect the positive (1) and negative (2) DC input terminals to your 24V battery bank. Ensure correct polarity.
  3. AC-uitgang: Connect your AC loads to the AC outlet (5). The push-on terminals simplify this connection.
  4. Optionele aansluitingen: Connect the RS485 communication port (6) or USB output port (7) for remote monitoring or charging devices.

4.3 Batterijcompatibiliteit

The inverter is compatible with both 24V lithium and lead-acid batteries (AGM/GEL/LFP).

EPEVER Inverter battery compatibility
Figure 5: The inverter is compatible with 24V lithium and lead-acid battery types, including AGM, GEL, and LFP. It incorporates surge current suppression technology to protect lithium batteries.

5. Gebruiksaanwijzing

5.1 In-/uitschakelen

  • To power on, ensure all connections are secure, then press the inverter switch (9). The LCD will illuminate.
  • To power off, press the inverter switch (9) again.

5.2 LCD-scherm en bedieningselementen

The rotatable LCD meter (4) provides real-time status and allows parameter configuration.

EPEVER Inverter LCD display and controls
Figure 6: The LCD display (1) can be rotated 180 degrees for convenience. It features UP/Setting button (2), Fault indicator (red) (3), Working status indicator (Blue) (4), and DOWN/Enter button / Output ON/OFF button (5). The blue working status indicator shows solid for normal operation, slow flashing (1/4Hz) for standby, fast flashing (1Hz) for fault, and off when powered down.

5.3 Bewaking op afstand

The inverter supports remote control and monitoring via phone applications and PC software using the RS485 communication port (6) or an optional eBox-WIFI-01 module.

EPEVER Inverter remote control setup
Figure 7: The inverter can be remotely controlled and monitored via smartphone apps (available on App Store and Google Play) or PC software, typically requiring an eBox-WIFI-01 module connected to the RS485 port.

5.4 Load Compatibility

The inverter is suitable for a wide range of daily appliances. Ensure the total wattage of connected appliances does not exceed the inverter's rated power.

EPEVER Inverter load compatibility exampde
Afbeelding 8: Examples of compatible appliances include washing machines, TVs, refrigerators, drills, air conditioners, water pumps, laptops, and kettles. Always avoid overloading the inverter. Different types of loads have varying starting impulse currents; select an inverter model appropriate for your equipment's power, current, and load characteristics.

6. Onderhoud

Regelmatig onderhoud zorgt ervoor dat uw omvormer optimaal presteert en lang meegaat.

  • Schoonmaak: Reinig de buitenkant van de omvormer regelmatig met een droge doek. Zorg ervoor dat de ventilatieopeningen vrij zijn van stof en vuil.
  • Verbindingen: Check all electrical connections regularly to ensure they are tight and free from corrosion.
  • Omgeving: Maintain a suitable operating environment, avoiding extreme temperatures and humidity.

7. Probleemoplossing

Als u problemen ondervindt met uw omvormer, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:

ProbleemMogelijke oorzaakOplossing
De omvormer schakelt niet in.Geen gelijkstroomingang; losse batterijaansluitingen; lage batterijspanningtageControleer de accuaansluitingen en voltage; Ensure battery is charged; Verify inverter switch is ON.
Geen AC-uitgangOverload; Short circuit; Over-temperature; Inverter faultReduce load; Check for short circuits in AC wiring; Allow inverter to cool; Check fault indicator on LCD.
Fault indicator (red) is onInternal fault; Input/output protection triggeredRefer to the LCD display for specific error codes if available; Disconnect loads and restart inverter; If fault persists, contact support.
Laag uitgangsvermogenBatterij bijna leegtage; Excessive load; Poor DC connectionsCharge battery; Reduce load; Tighten DC connections.

8. Technische specificaties

SpecificatieWaarde
MerkALTIJD
Modelnaam3000W
Nominaal ingangsvolumetage24V DC
Uitgangsvolumetage110VAC (±3%); 120VAC (-7%~+3%)
Uitgangsfrequentie50/60 Hz ±0.2%
Continu uitgangsvermogen3000 Watt
Peak Output Power (Surge)6000 Watt (gedurende 5 seconden)
Elektrische uitgangsgolfvormZuivere sinusgolf
USB-uitgang5VDC/Max.1A
RS485-communicatiepoort5VDC / 200mA
Compatibele batterijtypen24V Lithium and Lead-acid battery
Aantal stopcontacten1
Energy Specifications MetIEC62109, EN61000, RoHS
Artikelgewicht23.2 pond

9. Garantie-informatie

This EPEVER inverter comes with a 1 jaar garantie from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

10. Klantenservice

For technical assistance, troubleshooting, or warranty inquiries, please contact EPEVER customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (3000W) and purchase details ready.

© 2023 EPEVER. Alle rechten voorbehouden.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.