Invoering
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp met sensor, tonenasing its standard bulb shape and integrated sensor at the top.
Veiligheidsinformatie
Volg altijd de basisveiligheidsmaatregelen bij het installeren of gebruiken van elektrische producten om het risico op brand, elektrische schokken en persoonlijk letsel te beperken.
- Uitschakelen: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Alleen voor gebruik binnenshuis: Deze lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Correcte basis: Zorg ervoor dat de lamp holder is compatible with an E27 base.
- Deeltage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampde eisen van 's.
- Niet dimbaar: Deze lamp is not dimmable. Do not use it with dimmer switches.
- Oogcomfort: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Inhoud van het pakket
Het pakket bevat:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Installatie-instructies
- Schakel de stroom uit: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Verwijder oude Lamp: Carefully unscrew and remove the existing lamp from the E27 lamp houder.
- Nieuwe L installerenamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Positionering: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Herstel de stroom: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Gebruiksaanwijzing
Deze Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Automatisch aan/uit: De lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Daglicht sensor: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Bewegingssensor: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Lichtkwaliteit: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Onderhoud
The Philips LED Lamp with Sensor requires minimal maintenance.
- Schoonmaak: Zorg ervoor dat de stroom is uitgeschakeld voordat u gaat schoonmaken. Veeg de lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Sensorgebied: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Lamp schakelt niet in. |
|
|
| Lamp gaat niet uit. |
|
|
| Sensor sensitivity seems low. |
|
|
Specificaties
| Functie | Detail |
|---|---|
| Merk | Philips |
| Modelnummer | 929002058731 |
| Soort licht | LED |
| Wattage | 8 Watt |
| Gloeilamp equivalent | 60 Watt |
| Lamp Baseren | E27 |
| Lichte kleur | Warm Wit |
| Kleurtemperatuur | 2700 Kelvin |
| Lichtstroom | 806 Lumen |
| Deeltage | 100-240 Volt |
| Frequentie | 50 Hertz |
| Speciale kenmerken | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Binnen-/buitengebruik | Binnen |
| Levensduur | 15,000 uur |
| Afmetingen (H x B) | 12.2 cm x 6.25 cm |
| Materiaal | Plastic |
Garantie en ondersteuning
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Online hulp: Bezoek www.philips.com/support Voor veelgestelde vragen en contactmogelijkheden.