Invoering
The Fusion AM Series marine amplifiers are specifically engineered for the demanding marine environment. This 4-channel amplifier delivers 500 watts of peak power, capable of driving up to four pairs of speakers or two pairs of speakers and one subwoofer. Its robust design incorporates Class-AB amplification, conformal coated PCBs, and an efficient heat sink for reliable performance on the water.
Figure 1: Fusion AM Series Marine Amplifier (Model MS-AM504). This image shows the top and side view van de amplifier, highlighting its compact design and the input/output panel on the left side.
Belangrijkste kenmerken
- Klasse AB Amplifier Ontwerp: Provides efficient power delivery with minimal audio distortion.
- Conformal Coated PCBs: Offers enhanced protection against marine elements, extending the amplevensduur van de versterker.
- Integrated Heat Sink: Ensures optimal heat dissipation for improved component reliability and sustained performance.
- Advanced Audio Controls: Features built-in variable bass boost, a subsonic filter, and variable crossover filters for precise audio tuning and system protection.
- 2 Ohm Stereo Stable: Capable of powering up to four pairs of speakers or a combination of two pairs of speakers and one subwoofer.
Wat zit er in de doos?
Controleer bij het openen van de verpakking of de volgende artikelen aanwezig zijn:
- Fusion MS-AM504 Marine Ampverliezer
- Product Documentation (User Manual, Warranty Information)
Instellen en installeren
Proper installation is crucial for optimal performance and longevity of your marine amplifier. It is recommended that installation be performed by a qualified marine electronics technician.
Montageoverwegingen
- De ampDe versterker is ontworpen voor opbouwmontage.
- Choose a location that is dry, well-ventilated, and protected from direct sunlight and excessive heat.
- Zorg voor voldoende ruimte rondom de amplifier for air circulation, especially around the heat sink.
- Avoid mounting near heat sources or in areas where it may be exposed to direct water spray.
Bedradingsschema (conceptueel)
Below is a conceptual overview of the wiring connections. Refer to the detailed wiring diagram in the full PDF user manual for precise instructions.
- Stroomaansluiting: Sluit de amplifier to a stable 12V DC power source (12.25V nominal, up to 16V max) with appropriate gauge wiring and an inline fuse.
- Grond connectie: Ensure a solid ground connection to the boat's common ground point.
- Op afstand inschakelen: Connect to the remote output of your marine stereo head unit.
- RCA-ingangen: Connect audio signal cables from your head unit's pre-outs to the amplifier's RCA inputs (CH1/2, CH3/4).
- Luidsprekeruitgangen: Connect your marine speakers to the amplifier's speaker terminals. Observe correct polarity and impedance (2 ohm stable).
Figure 2: Close-up of the amplifier's input/output panel. This view details the RCA inputs, speaker terminals, power connections, and control knobs for crossover and bass boost settings.
Het bedienen van de Ampverliezer
Eenmaal geïnstalleerd, de amplifier operates in conjunction with your marine stereo head unit. Adjustments can be made using the controls on the amplifier zelf.
Audio-aanpassingen
- Niveauregeling: Adjusts the input sensitivity to match the output of your head unit. Start with the level control at minimum and slowly increase until desired volume is achieved without distortion.
- Crossover Filters (X-OVER SELECTOR):
- LP (Laagdoorlaatfilter): Allows only low frequencies to pass through, typically used for subwoofers. Adjustable from 40Hz to 160Hz.
- HP (High Pass): Allows only high frequencies to pass through, typically used for full-range speakers. Adjustable from 40Hz to 600Hz.
- VLAK: Disables the crossover filter, allowing all frequencies to pass through.
- Basversterking: Provides an adjustable bass enhancement from 0dB to +18dB, centered around 45Hz. Use sparingly to avoid distortion.
- Subsonische filter: Filters out extremely low frequencies (20Hz to 55Hz) that are below the audible range or harmful to subwoofers, improving sound quality and protecting speakers.
Opmerking: Always make small adjustments and listen carefully to the audio output to prevent damage to speakers or the ampverliezer.
Onderhoud
The Fusion AM Series amplifier is designed for durability in the marine environment. Regular, simple maintenance can help ensure its long-term performance.
- Schoonmaak: Veeg de buitenkant van de amplifier met een zachte, damp lap. Vermijd het gebruik van agressieve chemicaliën of schurende schoonmaakmiddelen.
- Verbindingen: Annually inspect all wiring connections (power, ground, remote, RCA, speaker) to ensure they are secure and free from corrosion. Tighten any loose connections.
- Ventilatie: Zorg ervoor dat het gebied rondom de amplifier's heat sink remains clear of obstructions to allow for proper airflow and cooling.
- Milieubescherming: While designed for marine use, minimizing exposure to direct saltwater spray and extreme temperatures will prolong the life of the unit.
Probleemoplossing
If you experience issues with your Fusion AM Series amplifier, consult the following common troubleshooting steps before seeking professional assistance.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Geen kracht/Amplifier gaat niet aan | Blown fuse; Loose power/ground connection; Faulty remote turn-on wire. | Check and replace fuse; Verify all power and ground connections are secure; Test remote wire for 12V signal. |
| Geen audio-uitvoer | Loose RCA cables; Incorrect input level setting; Speaker wires disconnected or shorted; Head unit issue. | Ensure RCA cables are firmly connected; Adjust input level; Check speaker wiring for shorts or disconnections; Test head unit functionality. |
| Vervormd geluid | Input level too high; Speaker impedance mismatch; Damaged speakers; Incorrect crossover settings. | Reduce input level; Verify speaker impedance (2 ohm stable); Inspect speakers for damage; Adjust crossover settings. |
| Ampoververhitting van de lifier | Insufficient ventilation; Overloaded speakers; Low impedance load. | Ensure clear airflow around heat sink; Check speaker impedance; Reduce volume or number of speakers if overloaded. |
If the problem persists after attempting these solutions, contact Fusion customer support or a certified technician.
Specificaties
| Attribuut | Waarde |
|---|---|
| Modelnummer | 010-01500-00 (MS-AM504) |
| Productafmetingen (L x B x H) | 14.41 x 9.02 x 2.09 inch |
| Gewicht | 7.17 pond |
| Deeltage (nominaal) | 12.25 Volt (DC) |
| Maximaal toevoervolumetage | 16 Volt (DC) |
| Montagetype | Oppervlaktemontage |
| Amplifier-klasse | Klasse AB |
| Kanalen | 4 Kanaal |
| Piekvermogen | 500 Watt |
| Impedance Stability | 2 Ohm stereo stabiel |
Garantie-informatie
The Fusion AM Series Marine AmpLifier wordt geleverd met een 1 jaar beperkte consumentengarantie from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the documentation included with your product or visit the official Fusion webplaats.
Ondersteuning en aanvullende bronnen
For further assistance, detailed wiring diagrams, or advanced troubleshooting, please utilize the following resources:
- Officiële gebruikershandleiding (PDF): Download PDF Manual
- Fusion Support Webwebsite: Visit the official Fusion website for product registration, FAQs, and contact information for technical support.
