1. Veiligheidsinformatie
Always read and understand all safety warnings and instructions before operating this tool. Failure to follow these warnings and instructions may result in serious injury.
- Oogbescherming: Always wear ANSI Z87.1 approved eye protection when operating or performing maintenance on this tool.
- Gehoorbescherming: Wear appropriate hearing protection to prevent hearing damage.
- Luchttoevoer: This is a pneumatic tool. Ensure a clean, dry, regulated air supply is connected. Do not exceed the maximum operating pressure.
- Correct gebruik: Gebruik het gereedschap alleen voor het beoogde doel. Wijzig het gereedschap niet.
- Werkstuk beveiligen: Bevestig het werkstuk altijd goed voordat u het gereedschap gebruikt.
- Vermijd contact: Houd handen, haar en losse kleding uit de buurt van bewegende delen.
- Lucht loskoppelen: Koppel de luchttoevoer los voordat u accessoires verwisselt, onderhoud uitvoert of wanneer het gereedschap niet in gebruik is.
- Waarschuwing Propositie 65: Dit product kan chemicaliën bevatten waarvan de staat Californië weet dat ze kanker en geboorteafwijkingen of andere reproductieve schade kunnen veroorzaken.
2. Product voorbijview
The Ingersoll Rand 2115QTiMAX 3/8" Drive Air Impact Wrench is designed for heavy-duty assembly and disassembly applications, suspension work, and industrial equipment repair. It combines powerful performance with a compact, lightweight design and quiet operation.
Belangrijkste kenmerken:
- Pro Performance: Delivers up to 300 ft-lbs of torque in reverse, suitable for various automotive and industrial tasks.
- Stille technologie: Features Quiet Tool technology to reduce sound levels caused by air pulsating through the 7-vane motor, enhancing user comfort.
- Lichtgewicht ontwerp: Measures less than 6 inches and weighs under 2.5 lbs, offering an excellent power-to-weight ratio and improved access to tight spaces.
- Superior Control: Equipped with a feather-touch trigger for precise control and a 4-position power regulator for adjustable output.
- Durable Reliability: Constructed with a titanium hammer case and steel wear plate for protection against harsh environments and drops.
Figure 2.1: Ingersoll Rand 2115QTiMAX 3/8" Drive Air Impact Wrench, showcasing zijn compacte ontwerp.
Figure 2.2: Detail of the one-handed forward/reverse push button controls and the robust construction of the tool.
Figure 2.3: Visual representation of the tool's impressive features, including its 300 ft-lbs of maximum torque.
3. Instellen
3.1 Aansluiten op de luchttoevoer
- Ensure your air compressor is off and depressurized.
- Apply thread sealant tape to the male threads of the air inlet fitting.
- Thread the air inlet fitting into the tool's air inlet port.
- Connect an air hose with a quick-connect coupler to the air inlet fitting.
- Set your air compressor regulator to the recommended operating pressure (typically 90 PSI / 6.2 bar).
- Turn on the air compressor and check for leaks.
3.2 Het bevestigen van stopcontacten
The 2115QTiMAX features a friction ring anvil for quick and secure socket changes.
- Zorg ervoor dat het gereedschap is losgekoppeld van de luchttoevoer.
- Align the square drive of the socket with the anvil on the tool.
- Push the socket firmly onto the anvil until it clicks into place. The friction ring will hold the socket securely.
- Om de dop te verwijderen, trekt u deze stevig van het aambeeld af.
4. Gebruiksaanwijzing
4.1 Forward/Reverse Mechanism
The tool features a one-handed forward/reverse mechanism located at the rear of the tool for easy direction changes.
- Om te selecteren Vooruit (tightening), push the lever to one side.
- Om te selecteren Achteruit (loosening), push the lever to the opposite side.
4.2 Power Regulator Dial
The 4-position power regulator dial allows you to adjust the torque output of the tool.
- Rotate the dial to select the desired power setting.
- Lower settings are suitable for delicate tasks or when less torque is required.
- Higher settings provide maximum torque for stubborn fasteners.
4.3 Triggerbediening
The feather-touch trigger provides impressive control over the tool's speed and power.
- Gently squeeze the trigger to start the tool at a low speed.
- Increase pressure on the trigger to increase the tool's speed and power.
- Laat de trekker los om het gereedschap te stoppen.
Figuur 4.1: View of the tool's controls, including the feather-touch trigger and the power regulator dial.
5. Onderhoud
Regular maintenance ensures optimal performance and extends the life of your Ingersoll Rand impact wrench.
- Smering: Apply a few drops of pneumatic tool oil into the air inlet before each use or after every hour of continuous use.
- Luchtfilter: Regularly check and clean the air filter on your air compressor to ensure a clean air supply to the tool.
- Schoonmaak: Keep the tool clean and free of debris. Wipe down the exterior with a clean cloth. Do not use harsh solvents.
- Opslag: Bewaar het gereedschap op een droge, schone plaats wanneer het niet in gebruik is.
- Inspectie: Periodically inspect the tool for any signs of wear or damage. Replace worn or damaged parts immediately.
6. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Gereedschap werkt niet of heeft een laag vermogen. | Low air pressure; Clogged air filter; Lack of lubrication; Worn internal parts | Check air compressor pressure (ensure 90 PSI); Clean or replace air filter; Lubricate tool with pneumatic oil; Contact authorized service center. |
| Overmatig geluid of trillingen | Lack of lubrication; Loose components; Worn internal parts | Lubricate tool; Check for and tighten any loose fasteners; Contact authorized service center. |
| Luchtlekken | Loose fittings; Damaged O-rings or seals | Tighten all air fittings; Replace damaged O-rings or seals. |
7. Specificaties
| Functie | Detail |
|---|---|
| Modelnummer | 2115QTIMAX |
| Schijfgrootte | 3/8 inch |
| Max Torque (Reverse) | 300 voetponden |
| Werkingsmodus | Mechanisch |
| Artikellengte | 6 inch |
| Artikelgewicht | 1.12 kilogram (ongeveer 2.47 lbs) |
| Materiaal | Titanium (hammer case) |
| Kleur | Grijs |
| Hoofd Stijl | Vast vierkant |
| Meetstandaard | SAE (Inch) |
| Meegeleverde componenten | Ingersoll Rand - 3/8 Quiet Impactool (2115QTIMAX) |
8. Garantie en ondersteuning
8.1 Fabrieksgarantie
This Ingersoll Rand tool comes with a Twee jaar beperkte garantie (with tool registration). Please refer to the official Ingersoll Rand webRaadpleeg de website of uw aankoopdocumentatie voor de volledige garantievoorwaarden.
8.2 Klantenservice
For technical assistance, parts, or service, please visit the official Ingersoll Rand website or contact their customer support directly. Keep your proof of purchase and model number handy for efficient service.