1. Product voorbijview
The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.
Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.
Belangrijkste kenmerken:
- Eenvoudige bediening: Engage and release the door holder with a foot.
- Duurzame constructie: Made from cast aluminum for longevity.
- Veilig vasthouden: Features a rubber bottom to prevent slipping.
- Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
- Finish: Bright Brass.
2. Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint.
- Schlage SP455A3 Kick Down Door Holder (1 unit)
- Montagemateriaal (schroeven)
3. Installatie-instructies
This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.
Benodigde gereedschappen:
- Potlood
- Meetlint
- Drill with appropriate drill bit (for pilot holes)
- Schroevendraaier (kruiskop aanbevolen)
Installatiestappen:
- Bepaal de montagelocatie: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
- Controleer speling: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
- Markeer de schroefgaten: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
- Boor proefgaten: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
- Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
- Testbewerking: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.
4. Gebruiksaanwijzing
The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.
- Om deel te nemen: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
- Loslaten: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.
5. Onderhoud
Regular maintenance ensures optimal performance and extends the life of your door holder.
- Schoonmaak: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
- Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
- Draai de schroeven vast: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.
6. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Door holder does not hold the door securely. |
|
|
| Door holder feels loose on the door. | De bevestigingsschroeven zitten los. | Tighten mounting screws with a screwdriver. |
7. Specificaties
| Attribuut | Detail |
|---|---|
| Merk | SCHLAGE |
| Modelnummer | 455A3 |
| Montagetype | Deurmontage |
| Materiaal | Aluminum, Brass, Rubber |
| Kleur/afwerking | Helder messing |
| Arm Length / Size | 4 inches (4 in H) |
| Door-to-Floor Clearance | 2 inch of minder |
| Artikelgewicht | 2.4 ons |
| Productafmetingen | 9.43 x 4.26 x 5.95 inch |
| Meegeleverde componenten | Door holder, Mounting Hardware |
| Batterijen vereist | Nee |
8. Garantie en ondersteuning
For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.
If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's weblocatie of productverpakking.
