NINJA-logo

NINJA TB401UK Detect Power Blender

NINJA-TB401UK-Detect-Power-Blender-product

Product Info

Blending made simple.

Welcome to the Ninja Detect™ Power Kitchen System Pro Inspiration Guide. From here you’re just a few pages away from recipes, tips, tricks, and helpful hints to give you the confidence to make everything from smoothies and drinks to soups, spreads, and entrées.

Now let’s get blending!

Using The Control Panel

NINJA-TB401UK-Detect-Power-Blender-fig-1

How it works

Identifies fresh or frozen ingredients and recipe size.
Automatically adjusts time, speed, and power for perfect results.

Add liquid alert*

Alerts you when liquid is needed during blending to completely process your recipe, so you get a perfectly smooth drink every time. When “ADD LIQUID 0” displays on the dial, press START/STOP and remove the cup from the base. Add 120-240ml of additional liquid. Reinstall the cup, then press START/STOP to run the BlendSense program again.
*Only available when using the Single-Serve Cup.

Intelligent BlendSense program that revolutionises traditional blending by sensing your ingredients and blending to perfection every time. The BlendSense program will be active by default. Press U button, then START/STOP. Once the program begins, it will automatically stop when blending is complete. To stop blending before the end of the program, press the dial again.

Simply press the dial to start the BlendSense program.

SENSE
Starts blending to sense your ingredients.
BLEND
Automatically chooses the blending speed, time, and pulses.
ENJOY
Blends to perfection, no matter the portion size.

BlendSense is best used to achieve smooth blends such as smoothies, frozen drinks, smoothie bowls, dips, purees, doughs, and sauces.

NINJA-TB401UK-Detect-Power-Blender-fig-2

Manual PROGRAMS

Go manual for total control of your blending speed and textures.
Press MANUAL, turn the dial to select your desired speed, then press START/STOP. When selected, each speed runs continuously for 60 seconds. Press the dial again to stop the program sooner.

VARIABLE SPEED CONTROL (Speeds 1-10): Jug only.

START SLOW (Speeds 1-3):
Always start at low speed to better incorporate ingredients and prevent them from sticking to the sides of the vessel.
DIAL UP THE SPEED (Speeds 4-7):
Smoother blends call for higher speeds. Low speeds are great for chopping veggies, but you’ll need to ramp up for purees and dressings.
HIGH-SPEED BLENDING (Speeds 8-10):
Blend until your desired consistency is reached.
The longer you blend, the better the breakdown and smoother the outcome will be.
LOW, MEDIUM, HIGH Speeds:
Single-Serve Cup and Processor Bowl only.

Food prep

Tips to simplify your chopping.

PREPPING VEGETABLES

• Cut both ends off ingredients and remove any outer peels or skins.
• Cut ingredients such as carrots, cucumber, celery, and zucchini in 5cm pieces, and broccoli or cauliflower florets into 2 ½cm. Cut ingredients such as onions in quarters.

PREPPING MEAT

• Trim excess fat and connective tissue. Cut meat in 5cm cubes.

WARNING: Stacked Blade Assembly is loose and sharp and not locked in place. Before pouring, carefully remove Stacked Blade Assembly. Failure to do so will result in a risk of laceration. Refer to the Ninja Owner’s Guide for additional information.

INTRO Nut butters

1. Add roasted nuts
Place 400g roasted nuts, such as almonds, peanuts, walnuts, cashews, and/or pecans, into the 2.1 L jug.
2. Add oil
Add 60ml cup oil, such as canola, coconut (melted), vegetable, or peanut, on top of the nuts.
3. Add-ins (optional)
Amplify your nut butter by adding up to 2 tablespoons of each:
4. Blend
Select BLENDSENSE, then press START/STOP.

BLENDSENSE TECHNOLOGY

STRAWBERRY

PEACH COBBLER
PREP: 15 MINUTES
COOK: 40 MINUTES
CONTAINER: 1.9 L POWER FOOD PROCESSOR BOWL
MAKES: 8-10 SERVINGS

INGREDIENTS

Pie Filling:

500g fresh strawberries, hulled, cut in half
340g fresh or frozen peach slices
150g granulated sugar,
plus 1 tablespoon, divided
3 tablespoons plain flour
½ tablespoon lemon juice

Biscuit Dough:

240g plain flour
1 tablespoon granulated sugar
1 tablespoon baking powder
¼4 teaspoon sea salt
115g cold unsalted butter, cut in cubes
180ml whole milk, plus 2 tablespoons, divided

DIRECTIONS

1 Preheat oven to 180°C. 2 Combine all filling ingredients in a medium bowl, reserving 1 tablespoon sugar. Pour filling into 20x20cm baking pan and set aside.
3 Install dough blade in the Power Food Processor Bowl. Add flour, sugar, baking powder, and salt, then press PULSE three times to combine.
4 Add butter and PULSE until combined. (Butter should be in pieces the size of peas.)
5 Add 180ml milk, select BLENDSENSE, and press START/STOP.
6 Transfer dough to a lightly floured surface and pat down with hands to 4cm thick. Using a pastry cutter or knife, portion the dough into 6 equal pieces.
7 Place biscuits on top of the prepared pie filling, brush the tops with the reserved 2 tablespoons milk, and sprinkle with reserved 1 tablespoon sugar.
8 When oven is preheated, bake for 40 minutes or until tops of biscuits are golden brown. Allow to cool for 10 minutes before serving.

© 2023 SharkNinja Operating LLC
TOTAL CRUSHING is a registered trademark of SharkNinja Operating LLC.
BLENDSENSE, HYBRID EDGE, and NINJA DETECT are trademarks of SharkNinja Operating LLC.

Documents / Resources

NINJA TB401UK Detect Power Blender [pdf] User Guide
TB401UK Detect Power Blender, TB401UK, Detect Power Blender, Power Blender, Blender

References

Leave a comment

Your email address will not be published. Required fields are marked *