M1-A Intelligent Window Wiping Robot
Product Information
Specifications:
- Product Name: Intelligent Window Wiping Robot
- Model: M1-A
- Components: Cleaning cloth, belt wheels, lighting effects,
beeps
Product Usage Instructions:
1. Safety Regulations:
It is essential to follow these safety regulations to ensure
safe usage of the product:
- Avoid heat sources and flammable materials.
- Ensure secure adhesion and no obvious damage before use.
- Avoid contact with water or liquids to prevent electric
shock. - Do not use the product in environments where it may fall into
water. - Avoid handling the product with wet hands.
2. Maintenance and Servicing:
Proper maintenance is crucial for optimal performance:
- Clean the cleaning cloth regularly.
- Check and clean the belt of the wheels to maintain
efficiency.
3. Lighting Effects and Beeps:
The product features lighting effects and beeps for user
convenience.
4. Troubleshooting:
Refer to the troubleshooting section in the manual for guidance
on resolving common issues.
FAQ (Frequently Asked Questions)
Q: Can the product be used on all types of windows?
A: The product is suitable for most types of windows, but it is
recommended to check the compatibility before use.
Q: How often should the cleaning cloth be replaced?
A: The cleaning cloth should be replaced when it shows signs of
wear or after extended use to maintain effectiveness.
Intelligent Window Wiping Robot
instruction manual M1-A
Please keep this product manual properly Please read this product manual carefully before using
1. Safetyregulations………………………………………2-4 2. Product compositio………………………………………5
2.1 Products and accessories………………………………5 2.2 Technical data…………………………………………5 2.3 Part name………………………………………………6 2.4 Remote control…………………………………………7 3. Product use………………………………………………8 3.1 Precautions before use………………………………8-9 3.2 Install cleaning cloth…………………………………10 3.3 Connection adapter……………………………………10 3.4 Assemble the safety rope component…………………10 3.5 Use extension cords as needed…………………………11 3.6 Spray with cleaning solution……………………………11 3.7 Product work…………………………………………12 3.8 End work………………………………………………13
4. Maintenance and servicing………………………………14 4.1 Cleaning cloth……………………………………………14 4.2 Cleaning the belt of the wheels…………………………14
5. Lighting effects and beeps………………………………15
6. Trouble shooting…………………………………………15
7. Product warranty card………………………………16-18
1.Safetyregulations
Please maintain a consistent level of vigilance when using the product, and follow the following guidelines! Please read this manual carefully before using the product ! Please keep the manual safe!
1.The product should not be used by children under 8 years of age or individuals with physical or mental disabilities. If necessary, use the product under the supervision and guidance of a guardian. Do not allowchildren to approach the product while it is in operation or use the product as a toy. 2.Do not use the product in extreme environments (temperatures below 0°C or above 40°C). 3.When the product is in operation, always keep it powered on. The builtin safety backup battery of the product is only used to maintain adhesion to the glass in case of sudden power failure for a limited time to prevent falling and should not be used as the primary power source to avoid risks. 4.During the use of this product, ensure that someone is nearby to supervise. Provide assistance to the product if necessary. When the machine is operating, move valuable items away from underneath the machine and ensure that no animals are standing underneath the working machine. 5.Use the product only in a home and indoor environment, and do not use it in commercial or industrial settings. 6.Do not use this product on glass with existing cracks, advertisement stickers, or protrusions to avoid the risk of glass breakage or product falling. 7.Follow the instructions manual when using this product. Only use accessories recommended or sold by the manufacturer , and use only the manufacturer’s original rechargeable batteries and adapters. 8.Ensure that the power voltage matches the voltage indicated on the adapter. 9.Ensure that the product is used on glass with a thickness greater than 5mm. 10.Avoid using the product on large areas of damp or oily glass to prevent slipping and falling risks.
2
11.Keep the product away from heat sources or flammable materials.
12.Do not use the product in situations where there is no secure adhesion
or obvious damage.
13.Do not place the product in water or any other liquid to reduce the risk
of electric shock. Avoid placing the product in areas where it may fall or
be pulled into a bathtub or sink.
14.Do not touch the plug or product with wet hands.
15.Battery charging should not be carried out in overheated or extremely
cold environments, as this may affect the battery’s lifespan.
16.Do not use the product when the adapter is not supplying power.
17.Do not charge the machine on household appliances, in damp areas, or
near a source of fire to avoid unnecessary damage.
18.Handle the power cord carefully to prevent damage. Do not drag or
pull the product or power cord using the power cord. Do not clamp the
power cord between the glass during use or place objects on the power
cord. Keep the power cord away from heat sources.
19.Do not use the product with a damaged power cord or power outlet. If
the product is not working properly due to falling, damage, or water
ingress, do not use the product. To avoid injury, the product should be
repaired by the manufacturer or their after-sales servicedepartment.
20.If the power cord is damaged, it must be replaced by a professional
from the manufacturer, their repair department , or a similar department to
avoid danger.
21.Before maintenance or cleaning the product, unplug the plug from the
power outlet, but do not pull the plug out of the outlet by pulling the
power cord.
22.The battery must be replaced by a professional from the manufacturer,
their repair department, or a similar department.23.Before discarding the
product, the batteries must be removed and disposed of according to local
laws, regulations , and environment
alregulations.
24.To dispose of the product, first disconnect the product’s power, then
remove the battery from the product.
25.Dispose of used batteries in accordance with local laws, regulations,
and environmental regulations.
3
26.Even in the case of severe damage to the product, do not incinerate the product, as the product’s battery may explode . 27.Follow the instructions in this manual when using the product. The company is not responsible for any losses or injuries caused by improper use. 28.It is strictly prohibited for children, individuals with mental disabilities, or those lacking common sense and experience in using household appliances to use this product without proper guidance. 29.Supervise children’s behavior while the machine is in operation to ensure they do not play with the product. 30.Children are strictly prohibited from playing with the product. 31.Children are strictly prohibited from cleaning and maintaining the product unsupervised.
4
bottle
bottle cap
2.3 Part name
spout LED status indicator
spray
kbeuytton hhaandnldelse
cleaning cloth
blowers water tank filling port
fan Cleaning cloth
driving wheels Bottom Status Indicator
Safety ropseafpeetynrdoapnet asCsehmabrlgying line
Drive wheel set Start switch
6
3. Product use
3.1 Precautions before use
It is strictly prohibited to use this product on framed glass with a frame thickness (height difference from glass surface to frame surface) of less than 5mm.
Note: Please use this product on framed glass with an area greater than or equal to 50* 70cm.
When the red and blue lights alternate flashing after connecting the adapter, the machine is in charging status. Ensure that it is charged until the blue light stays on constantly (approximately 1 hour). Do not perform cleaning work on the product when the red light is flashing.
The glass surface has too much dust. Before using the product, please wipe a clean area the size of the product first so that the product can adhere.
*When there are immovable obstacles(such as guardrails.furniture.etc.)in front of the window.this product can only be used when the distance between the window and the obstacle is greater than 8.5cm.
*When the product is working on a horizontal glass surface, use the remote control to operate the product.
*If the product is used on a window that is not completely vertical, there is a possibility that the product may not operate properly. Make sure there is someone nearby to supervise, and provide assistance if necessary.
8
This product should not be used in an inverted position. Please use the cleaning solution specially provided by our company. Using nonspecialized cleaning solutions may result in poor cleaning effects or damage to the product.
9
3.2 Install cleaning cloth
3.3 Connection adapter
Align and attach the cleaning cloth neatly on the inside of the product’s bottom suction plate.
3.4 Assemble the safety rope component
When using this product to wipe glass, please use the safety rope component to secure the product and improve its safety performance.
Safety rope end 10
3.5 Use extension cords as needed
Extension cords can be used to increase the length according to the actual distance or the size of the glass,each extension cord is 2 m. Note that when the product is used outdoors at highaltitude,a maximur of one extension cord can be used
Installation of SafetyBuckle
When you use the product to wipe the glass you need to fix the safety cord to other positions in the room When using the product to wipe the outside of the glass, please close the window, the windcw gap is slightly larger than the diameter of the safety cord can be(do not larger thal the diameter of the safety buckle).
3.6 Spray with cleaning solution
Spray the cleaning solution evenly on the front wiping cloth, and the amount can be adjusted according to the degree of dirt on the glass. It is recommended to spray evenly 8 times on each wide edge of the front wiping cloth. After spraying, use a dry cloth to wipe off the excess cleaning solution on the base to prevent slipping during product operation. Please note to use the cleaning solution specially provided by our company, as using nonspecialized cleaning solutions may result in poor cleaning effects or damage to the product.
11
3.7 Product work
1.Connect the power adapter
The adapter plug is plugged into a 220V AC power source, and the other end connected to the machine’s DC port, the blue light on the machine stays on. *When the product is running, do not disconnect the power; if the power is cut off during operation, there is a risk of the product falling.
2.Short press the handle button.
Short press” ” button The blue l ight is blinking, and the fan starts ru nning. *Do not place the fan near s mall objects like hair to avoid block ing the fan and affecting the product operation.
3.Adsorption
Place the product at a distance of more than 10cm from the glass frame and its handle, and wait for the blue light to stay on steadily to indicate successful attachment. * When there is an immovable obstacle in front of the window (such as a rai ling, furniture, etc.), the product can only be used when the gap between th e window and the obstacle is greater than 8.5cm.
12
3.8 End work
After the glass cleaning work is completed, the product will return to the vicinity of the starting position and emit a beep sound as a notification.
1.Remove the product
Hold the handle of the product, press and hold the !button for 3-5 seconds to stop the fan operation, then remove the main unit. You can use a dry cloth to gently wipe off any marks left by the product on the glass.
2.Disconnect the power
Note: If the product displays a red light alarm during operation, please first check if the power adapter is properly connected and supplying power. Once the connection is confirmed, the product’s blue light should stay on steadily, and it will automatically resume operation. If the power adapter is properly connected but the product still shows a red light alarm, use the directional keys on the remote control to move the product away from that position. Once the blue light stays on steadily, press the start/pause button on the remote control to resume the product’s operation.
13
4. Maintenance and servicing
4.1 Cleaning cloth
Remove the cleaning cloth, soak it in water at around 20°C for 2 minutes, then gently hand wash it, lay it flat to dry before using it again.
*Do not directly use the cleaned
cleaning cloth to avoid slipping
duringbproduct use.
Good maintenance helps extend the
life of the cloth. When the cloth ages
aVnedlccraon, npoletaasdehreerpelaticgehdtiltyintohtitmheemto achievpe the bewst cleaning}effect.
§
± º
Æ
4.2 Cleaning the belt of the wheels
Connect the adapter, the blue
light of the machine is always on.
Press the
button on the re-
mote control to rotate the wheels.
Use a cloth and cleaning solution to
wipe the belt of the wheels.
Press the” ” button on the remo
-te control to stop the wheels from rotating.
The wheels of the machine are prone to accumulating dust and water
during use, which can cause slipping. Please clean the belt of the wheels promptly. Remove the product.
14
5. Lighting effects and beeps
Red and blue lights alternating flashing
Blue light stays on constantly
Blue light flashing
Red light flashing
Red light stays on constantly
The red light stays on indicating low battery power, the product is currently charging.
1.The machine is powered on normally.
2.The machine successfully adheres and enters standby mode. Normal, you can continue operation by placing theproduct on the window.
The power adapter is disconnected.
The red light stays on during machine operation, indicating wheel overload.
The machine enters a shutdown state.
6. Trouble shooting
The red light stays on
Wheel overload
Press N on the remote control first, then press Z to restore the blue light. Pressing the handle button briefly can also restore the blue light.
The red light
g flashing
indicates an alarm
Power adapter disconnected
The product’s drive wheel is spinning freely, Glass surface too and thewalking dirty path is abnormal
a.Turn on the power first, then press the start button to continue the product operation.
b.In the event of a power outage, use the remote control directional keys to guide the product to an easily accessible location and remove the product.
yUsing the remote control during a power
outage carries some risks, please ensure someone is nearby to supervise.
a.Clean the drive wheel. b. Replace the cleaning cloth.
yThis product is not suitable for cleaning
heavily soiled glass.
¥
The remote control is not
functioning
Only the start/pause button works during Pause the product operation first, then use normal operation of other remote control buttons. the product
15
Product warranty card
Dear user
Thank you for purchasing and using our product! In order to protect your rights, our product implements after-sales service based on the national regulations of the “Regulations on the Repair, Replacement, and Return of Goods” (commonly known as the Three Guarantees). To ensure our service meets your satisfaction, please carefully read and keep this Three Guarantees card after purchase. Product Quality Assurance Instructions One.Please note: This Three Guarantees card is a warranty certificate and must be stamped by the seller to be valid. Please keep it safe. Two.Service Validity Period: Effective from the date of purchase, as recorded on this certificate (sales date). Three.Service Coverage: i.Within seven days of purchase, if the packaging is undamaged and the product can be resold without affecting its condition, consumers unsatisfied with the product can return or exchange it. ii.Within fifteen days of purchase, consumers unsatisfied with the produc can exchange it for a product of equal value. iii.During the warranty period, under normal use and maintenance, free repair services are provided for the purchased product. If a malfunction is caused by original components of the machine, confirmed by technical personnel, free repair and replacement of parts will be conducted. iv.When requesting repair or exchange, it is essential to bring the Three Guarantees card and the sales receipt. The seller is responsible for replacement (complete attachments are required for returns or exchanges Four.The following circumstances are not covered by the Three Guarantees service: 1.Beyond the validity period of the Three Guarantees card.
16
2.Damages caused by not following the product’s instructions for use, maintenance, and storage. 3.Damages caused by complaints from repairers not responsible for the Three Guarantees. 4.Lack of a valid Three Guarantees certificate and valid invoice (except those that can prove the validity period of the Three Guarantees for the product). 5.Alteration of the Three Guarantees certificate. 6.Products where consumers have removed the bottom stickers themselves. 7.Products where consumers have lost the anti-counterfeiting label or the label is damaged and difficult to distinguish. 8.Products where the product model or serial number on the Three Guarantees certificate does not match the actual product. 9.Product defects or damages caused by irresistible forces (such as earthquakes, fires, floods). 10.Damages caused by the use of pirated software, or product damage caused by virus infection during use. 11.Product defects caused by human factors (e.g., operational errors, damage during transportation, collisions, inappropriate voltage input). 12.Other defects or damages not related to product design, technology, manufacturing, or quality issues.
17
User’s name
Phone/mobile
User’s address and postal code
Model type
Stamp of the purchasing store
Model serial number
Invoice number
Attachment serial number
Country of origin
Mail order product name
Store address and postal code
Store phone number
Date of sending for repair
Completion date
User
Description
description of the fault
Date of purchase
Repair record
Repair number
Stamp of repair authorization
Note:
1.Inspection and software updates are not considered as repairs. 2.Only faults within the scope of the warranty performance failure table are recorded for repair. 3.Please ask the customer to keep this repair card safe for warranty purposes.
18
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure statement The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
Ningbo M1-A Intelligent Window Wiping Robot [pdf] Instruction Manual M1A, 2BB5D-M1A, 2BB5DM1A, M1-A Intelligent Window Wiping Robot, M1-A, Intelligent Window Wiping Robot, Window Wiping Robot, Wiping Robot, Robot |