Nillkin PG109 iPad Keyboard Case with Keyboard

Product introduction

Equipped with an adjustable stand, removable keyboard and trackpad, Bumper Combo Keyboard Case makes it convenient to type, watch movies, read and draw, also lets you enjoy a flexible operation experience. The adopted military-grade anti-fall case highly fits close to iPad. The patented sliding lens cover design provides a reliable protection for the front back, four corners and camera of the device. Concise and delicate PU fabric blend with the aesthetics of Pad, a perfect integration of art and technology.

Product specifications

• Bluetooth version: Wireless 3.0
• Effective operating range: Within 10 meters
• Modulation mode: GFSK
• input voltage: SV
• Input current: 2A
• Standby duration: ;;i,1ao days
• Charging time: ;;,2.s hours
• Lithium battery capacity: 5OOmAh
• Sustainable working hours: Backlit mode 14h Non-backlit modelOOh

Indicator light graphic 

Indicator description

Keyboard Indicators	Indicator colors	Indicator status
Power indicator	Red	Light is on when power on , then off after 3 seconds
Bluetooth indicator	Blue	Flashes and turns off after successful connection
Low voltage indicator	Red	Keep flashing slowly until the keyboard stops working
Charging indicator	Red/Green	Red light on while charging, turn green when fully charged
Caps lock indicator	Blue	On when uppercase, off when lowercase
Power indicator	Red	Red light flashes once, Power remaining0-25% Red light flashes twice, Power remaining 25-50% Red light flashes three times, Power remaining 50-75% Red light flashes four times, Power remaining 75-100%

Bluetooth keyboard connection steps

Operation steps on keyboard:

• Step 1: Slide the power switch of the keyboard to ON position, and Power indicator will be on for 3 seconds, then off.
• Step 2: Press FN+connect, Bluetooth indicator will flash and turn into pairing mode

Operation steps on Pad:

• Step 3: Turn Bluetooth on Pad
• Step 4: Find the Bluetooth keyboard device and click to connect.
• Step 5: .. Connected” will display when connected, the Bluetooth indicator will go off

Energy saving sleep mode
The keyboard will automatically enter the sleep state when there is no opera­tion command within 10 minutes on it. Just press any key to turn on the power indicator, and the keyboard rework normally.

Charging method
Connect to 5V2A adapter, connect Type-C charging cable to the keyboard to charge
Attention: Charging indicator will turn red while charging, and it will turn off after finish charging.

Keyboard shortcut function key description

Key icons	Shortcut key function	Key icons	Shortcut key function	Key icons	Shortcut key function
	Home		Switch keyboard languages		Mute
	Decrease the brightness		Search		Decrease the volume
	Increase the brightness		Play the previous song		Increase the volume
	Backlit brightness		Play or pause		Lock your screen
	Virtual keyboard		Play the next song

	FN+ Page Up	FN+ Home
	FN+ Page Down	FN+End
	turn off/ enable trackpad	enters Bluetooth search pairing mode
	to display power remaining in percentage
	Switch the keyboard backlight color, 7 colors are optional
‘FN’ key combination is required to achieve the functions aboved.

Touch panel gesture instruction

Function: move the mouse

Gesture: Click
Function: left click

Gesture: Click with two fingers function: right click

Gesture: Swipe left or right with two fingers
Function: Move left or right

Gesture: Swipe up or down with two fingers
Function: Move up or down

Gesture: Swipe up with three fingers
Function: Back to  the home page

Gesture: Swipe up with three fingers and hold.
Function: Switch between multiple task

Gesture: Swipe left or right with three fingers
Function: switch between different pages
Using “Tap to click” instead of deep press to click Connect your keyboard to your iPad, go to “Setting”➔•General” -+”Trackpad”-+turn on “Tap to Click”
After iPad OS rises to 10, “Capslock” key on the keyboard will be switched to the function of the Latin keyboard by default, which causes case switch­ing invalid.

The following settings can help restore normal functions:

1. Connect Bluetooth first
2. Select the keyboard in General of Settings, and then select the physical keyboard
3. After clicking in, you will see that the “capslock key switch” is on, and just turn it off.

Troubleshooting

1. Make sure the power is on
2. Make sure the keyboard is within the operable distance
3. Make sure the battery is fully charged
4. Make sure the Bluetooth setting of iPad is on
5. Make sure the connection of wireless keyboard and Bluetooth is on
6. Make sure the wireless keyboard and Bluetooth are paired

Notes

1. Please keep the product away from water and other liquids.
2. Please keep the ambient temperature at 0-45 •c.
3. Do not seriously impact, disassemble or repair this product by yourself.
4. Do not touch benzene, diluent and other chemicals.
5. It is recommended to turn off the keyboard to prolong the battery service life when the keyboard is not used for a long time
6. In order to keep a longer battery life, it is recommended to charge the keyboard only when the power supply flashes, and each charging time should be no less than 2 hours.

Documents / Resources

Nillkin PG109 iPad Keyboard Case with Keyboard [pdf] User Manual PG109 iPad Keyboard Case with Keyboard, PG109, iPad Keyboard Case with Keyboard, Keyboard Case with Keyboard, Keyboard

References

• User Manual