NFC Aufsteller NFC Display Large

Specifications

• Product Name: NFC Aufsteller – Large (NFC display – Large)
• Dimensions: 90 mm x 150 mm
• Bottom Edge: 15 mm

NFC display – Large

The dimensions of the stand are 90 mm x 150 mm. The bottom edge (the hatched area in the template), which disappears into the wooden stand, is 15 mm. Download the print template and open it in your editing program.

Now draw your design on the print template.

Please note the following points

1. Rasterize all text.
2. Make sure the font isn‘t too small. Print the layout on your printer as a test.
3. Send us a black and white file.
4. Create the design, preferably as a vector graphic or alternatively as a high-resolution image (300 dpi).
5. When you create a vector graphic, reduce the file to one single layer.

Side tips: You can, of course, also draw in the lower red-shaded area. You can also place internal information here, such as a numbering system or the name of the assigned colleague. Would you like a borderless, all-over design? Then draw 2 mm beyond the edges.

After placing your order, we will send you an email with the digital proof within 24 hours. We will only start production after your approval. Therefore, it is very important that you provide a valid email address where you can be easily reach.

Product Usage Instructions

1. Download the print template provided and open it in your editing program.
2. Draw your design on the print template, ensuring to follow these points:
   • Rasterize all text.
   • Avoid making the font too small.
   • Print the layout as a test.
   • Send a black and white file.
   • Create the design as a vector graphic or a high-resolution image (300 dpi).
   • If using a vector graphic, reduce the file to one layer.
   • For borderless designs, extend the design by 2 mm beyond the edges.
3. On the product page of the online shop, input your desired link and upload your design. Specify the quantity and proceed with your order.
4. After ordering, you will receive an email with the digital proof within 24 hours. Production will commence only after your approval.
5. Ensure to provide a valid email address for easy communication.

FAQs

Q: Can I use any editing program to work on the print template?
A: Yes, you can use any editing program that supports the necessary features like rasterization and vector graphics.

Q: What should I do if I want to make changes to my design after submitting it?
A: Contact customer support immediately with your order details and revised design. They will assist you in the process.

Q: Is there a limit to the number of colors I can use in my design?
A: There is no specific limit, but it is recommended to keep the design simple for better visibility and printing quality.

Documents / Resources

NFC Aufsteller NFC Display Large [pdf] Instructions NFC Display Large, Display Large, Large

References

• User Manual