NEXTBASE NBDVR122 Dash Camera User Manual

122
User Manual

Introduction to your Dash Cam

This range of Nextbase™ Dash Cams has been designed specifically with ease of use in mind; it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use.
Please check the firmware version of the Dash Cam, the version can be found in the Setup menu under System Info.
The latest versions are available to download from our website, where you can download and update when necessary. www.nextbase.com

FIRST TIME USE
Before you can use your Dash Cam, it is essential that it is fully charged. Connect your Dash Cam via the USB port to a home power source such as a PC or home USB socket for approximately 2 hours.

Basic Operation
It is essential that a quality branded Class 10 or U1 type Micro SD card is used with this Dash Cam use to the very large data rate generated by high resolution recording. For best results, we recommend using our Nextbase™ branded SD cards with your Dash Cam.
Your Nextbase™ Dash Cam is set to record video, in files of just 1 minute in length. This means that each video file is a manageable size should you need to download and send to your insurance company.
Eventually your MicroSD card will fill up with video files but don’t worry, the camera automatically deletes the oldest file to make space for new recordings. This way you never run out of space and have plenty of driving data saved.
Typically a 16Gb card will store the last 1.5 hours of driving footage. For summer months where the clocks are brought forward or for driving in other countries, adjust the time in the Setup Menu (Time & Date) to account for the time difference from GMT by adding or subtracting 1 hour as required.
There are 3 modes of camera operation – Video, Photo and Playback.
Press the MODE button on the Dash Cam to select required mode.
Video Mode: The default mode when the camera is turned on, for video recording.
Photo Mode: Allows you to take still photographs.
Playback Mode: Allows you to view recorded video or photographs upon the Dash Cam LCD screen.

Automatic Start / Stop Technology
The Dash Cam will automatically power on and be ready to use once power is available.
In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on. When power is cut off, the Dash Cam will perform an automatic shutdown process.

1. Tips for capturing best video footage:
   1.1 Position the Dash Cam in the centre of the windscreen and ideally behind the rear view mirror so it is not a distraction to the driver.
   1.2 Ensure that the area on the windscreen that the Dash Cam is looking through is clear of dirt and is within the wiper zone. This will ensure that your videos are as clear as possible.
   1.3 Reduce the amount of sky in the picture, by angling the view of the camera towards the road.
   Too much sky will make the road appear darker due to the automatic exposure compensation.
   1.4 Remove unnecessary items from your dashboard. If objects are placed on your dashboard these can cause reflections to be seen on the windscreen and these reflections may be captured during recording.
   1.5 To improve dash board glare, a Nextbase™ Polarising Filter can be purchased.
2. Tips for stable memory card performance:
   2.1 Periodically format the memory card. Every 2-3 weeks we recommend that you format the memory card. This will wipe any files from the card and set it up afresh for continued use with your Dash Cam. Of course, you should only do this AFTER you’ve downloaded any files from the card that you may want to keep, as formatting the card will remove all content.
   2.2 Format your memory card using the Dash Cam. This will make sure that the card is structured specifically for your camera. Press MENU twice and choose the Format Card option.
   Follow the on-screen instructions accordingly.
   2.3 Switch off the Dash Cam before removing the SD memory card, to prevent the chance of damage being caused to the memory card or the files stored upon it.

Nextbase™ SD Cards
For best results, we strongly recommend using our Nextbase™ branded SD cards with your Dash Cam, available to purchase online from nextbase.com, or your nearest retailer. A card that is not made specifically for a Dash Cam may appear to work perfectly in the beginning, although failure tends to happen after prolonged use, this could be days, weeks, or months. In a worst-case scenario, you may only discover recording failure after your SD card fails to record a serious incident, therefore using a suitable SD card is imperative.

Precautions

Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problems.
WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire.
CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so. Have the unit serviced by a qualified service technician if;
The unit has been exposed to rain or water. The unit does not seem to operate normally. The unit exhibits a marked change in performance.
LCD: A Liquid Crystal Display (LCD) screen is a multilayer complex component, containing 230,400 pixels. Pixels can however fail during normal product life. 1 pixel = 0.000004% failure rate, and one pixel failure per year of operation is considered normal and not a cause for concern.
WEEE:

Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. This symbol on the product or on the packaging indicates that this cannot be disposed of as household waste. You must dispose of your waste equipment and/or battery by handing it over to the applicable take-back scheme for the recycling of electronic equipment and/or batteries. For more information please contact your local household waste disposal office.

CHOKING HAZARD: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.

Cautions on Using this Product

1. Ensure that the windscreen is free of dirt or grease before placing mount upon it.
2. Do not obscure the view of the road ahead or impede the deployment of any airbags in the event of an accident.
3. When not in use, please disconnect the car adaptor from both the 12/24Vdc outlet in your vehicle and the Dash Cam itself.
4. Only clean the Dash Cam with a soft dry cloth, for tough dirt, apply some neutral detergent diluted in 5 to 6parts water to a soft cloth. Please note that alcohol, thinner, benzene etc could cause damage to the paint or coatings.
5. Avoid making contact with the lenses as damage may be caused.
6. If required clean the glass lens carefully using spectacle lens cleaning fluid on a soft cloth only.
7. Before you can use your Dash Cam, it is essential that it is fully charged. Connect your Dash Cam via the USB port to a home power source such as a PC or home USB socket for approximately 2 hours.
8. You agree to use your Nextbase Dash Camera in compliance with all applicable laws, including local laws of the country or region in which you reside or in which you use your Nextbase Dash Camera. When you use your Nextbase Dash Camera, you do so at your own initiative and you are responsible for compliance with any applicable laws, including but not limited to applicable privacy and data collection laws, and laws prohibiting or restricting the placement of objects on the windshield of a motor vehicle. IT IS THE USER’S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES. Portable Multimedia Limited trading as Nextbase is not responsible if you access or use your Nextbase Dash Camera in any manner that violates applicable law
9. The video recordings made by this Dash Cam are intended for personal use only.
10. Publication of the recordings on Youtube, the internet or other methods are subject to the Data ProtectionAct and the requirements thereof must be adhered to. If the Dash Cam is to be used within a commercial environment, i.e. truck use, then the CCTVregulation apply also, in addition to the Protection Act regulations. This includes labelling to identify the use of CCTV is taking place, the omission of Audio recording and informing the relevant authorities of who controls the data.
11. Video playback upon the Dash Cam which is visible to the driver is prohibited or restricted in some countries or States. Please adhere to these laws.
12. Whilst driving, do not adjust the controls of your Dash Cam as this is a distraction to driving.

Distractions can lead to accidents, and the risk of injury or death.
Always keep your eyes on the road, and keep aware of your surroundings.

Product Warnings

Failure to heed the following warnings could result in an accident or collision resulting in death or serious injury.

Distraction Warning
This Dash Cam is intended to enhance the situational awareness when used properly. If used improperly, you could become distracted by the display, which could lead to an accident causing serious personal injury or death. DO NOT seek to access the information stored on the Dash Cam or change the device settings whilst driving. Information stored on the Dash Cam should be reviewed only when your vehicle is stationary, and you are parked in a safe place in compliance with local laws. The Dash Cam settings should only be changed when your vehicle is stationary, and you are parked in a safe place in compliance with local laws. Always maintain awareness of your surroundings and do not stare at the display or become distracted by the display. Focusing on the display could cause you to miss obstacles or hazards. Use the Dash Cam at your own risk.
Do not change settings, or access any functions requiring prolonged use of the Dash Cam controls while driving. Pull over in a safe and legal manner before attempting such operations.
Video playback upon devices with displays which are visible to the driver, is prohibited or restricted in some countries or states. Please adhere to these laws.

Vehicle Installation Warnings
When installing the Dash Cam in a vehicle, do not place the Dash Cam where it obstructs the driver’s view of the road or interferes with vehicle operating controls, such as the steering wheel, foot pedals, or transmission levers. Do not place unsecured on the vehicle dashboard. Do not place the Dash Cam in front of or above any airbag.

Battery Warnings
Lithium-ion batteries are used in most NextbaseTM Dash Cams. If these guidelines are not followed, batteries may experience a shortened life span or may present a risk of damage to the Dash Cam, fire, chemical burn, electrolyte leak, and/or injury.

• Do not disassemble, modify, remanufacture, puncture, or damage the Dash Cam or batteries.
• Do not remove or attempt to remove the non-user replaceable battery.
• Do not expose the Dash Cam to fire, explosion, or other hazard.
• Do not expose the Dash Cam to rain or water.

Magnet Warnings
Both the Dash Cam and its mount may contain magnets. Under certain circumstances, magnets may cause interference with some internal medical devices, including pacemakers and insulin pumps. Devices and mounts that contain magnets should be kept away from such medical devices. Magnets may cause damage to some electronic devices, including hard drives in laptop computers and bank / credit or membership cards. Use caution when devices and mounts that contain magnets are near electronic devices or bank / credit or membership cards.

Usage Precautions

Failure to heed the following notices could result in personal injury or property damage, or negatively impact the Dash Cam functionality.

Battery Precaution

• Do not immerse or expose the Dash Cam or batteries to rain, water or other liquids.
• Do not leave the Dash Cam exposed to a heat source or in a high-temperature location, such as in the sun or in an unattended vehicle. To prevent the possibility of damage, remove the Dash Cam from the vehicle or store it out of direct sunlight, such as in the glove box.
• Do not operate the Dash Cam outside of the following temperature range: from -20° to 45°C (from -4° to 113°F).
• When storing the Dash Cam for an extended time period, store within the following temperature range: from 0° to 25°C (from 32° to 77°F).
• Do not use a power and/or data cable that is not approved or supplied by Nextbase™.
• Contact your local waste disposal department to dispose of the Dash Cam/batteries in accordance with applicable local laws and regulations.

Windshield Mounting Legal Restriction Precaution
Before using the Dash Cam on your windscreen, check the state and local laws and ordinances where you drive. Some laws prohibit or restrict the placement of objects on the windshield of a motor vehicle. IT IS THE USER’S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES. Always mount your NextbaseTM Dash Cam in a location that does not obstruct the driver’s view of the road. NextbaseTM does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your NextbaseTM Dash Cam.

Camera Legal Requirements Precaution
In some jurisdictions it could be considered an invasion of privacy rights to take or publicly display photographs or videos of people or their vehicles using this product. It is your responsibility to know and comply with applicable laws and rights to privacy in your jurisdiction and in any jurisdiction in which you may use this device. Video recordings made by this Dash Cam should be for personal use only.
Publication of the recordings on YouTube, the internet or other methods is subject to the data protection legislation and the requirements thereof must be adhered to. Such data protection legislation may prohibit the use and dissemination by you of Dash Cam footage or may impose restrictions on it ­ we recommend that you check the legal requirements with your legal advisor before disseminating any Dash Cam footage.
If the Dash Cam is to be used within a UK commercial environment, i.e. truck use, then the CCTV regulations apply in addition to the Data Protection Act regulations. This includes labelling to identify the use of CCTV is taking place, the omission of Audio recording and informing the relevant authorities of who controls the data. For use in a commercial environment in non-UK countries, please refer and adhere to local regulations and requirements. For non-UK operation, specific legal requirements may apply where Dash Cams are to be used in a commercial or employment context – again, we recommend that you check the legal requirements with your legal advisors prior to commencing use of Dash Cams in commercial or employment contexts.

Notices
G Sensor Notice
The G Sensor within the Dash Cam measures forces exerted upon it, with reference to one G which is the nominal force exerted upon us when stationary on the earth’s surface. The G Sensor will also trigger to protect any recording currently in progress, if a pre-determined threshold of force is exceeded. The G Sensor protection will be adversely affected if the Dash Cam is NOT mounted in the vertical direction i.e. with the lens pointing to or from the direction of travel. G Force information derived from a G Sensor is not warranted to be totally accurate at all times, as it is derived from the G Sensor through a sampling method over time. The precision of the G Sensor value recorded depends upon when the acceleration took place at the instance of the sample taken. The thresholds to trigger the video protection rely upon a trigger value being exceeded between two successive samples, in any one of the three G Sensor axis. If the Automatic G Sensor protection does NOT trigger during an event, then the Protect button should be pressed, in order to protect the file. Protecting the file can also be performed using the Playback function upon the Dash Cam, or through the MyNextbase Connect™ App for applicable Wi-Fi enabled models.

Product Specification

Mac is a registered trademarks of Apple Inc. in the United States and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
MicroSD™ and the microSD logo are trademarks of SD-3C, LLC.
Other trademarks and trade names are those of their respective owners.

Package Contents

Please check the contents of your Nextbase™ Dash Cam product.

Nextbase™ 122 Dash Cam		Your Dash Cam to record the road ahead
Click & Go Powered Mount		Adhesive 3M attachment
Car Power Cable (4m)		Charge your Dash Cam in car using the Car Power Cable
USB Connection Cable		Connect your Dash Cam to a PC
122 Quick Start Guide		Quickly get your Dash Cam up and running using Quick Start Guide.
Cable Tidy Tool		Use the Cable Tidy Tool to stow the power cable within the lining of your car.

Product appearance may differ slightly to that shown above.

Product Features

Thank you for purchasing this Nextbase™ Dash Cam product, in this section we will outline some of the features available with this Dash Cam.

HD Recording Capability
720p HD recording at 30 fps, to record the road ahead.

Click & Go Pro Powered Mount
Click and Go Pro powered magnetic car mount to easily install and remove your Dash Cam.

G Sensor / File Protection
In the event of an impact the device will automatically ‘protect’ the recording, stopping the file from being over-written and saving it for future review. This can also be performed manually, by pressing the ‘protect’ button. Individual files can also be ‘protected’ when viewed within playback mode.

Automatic Start / Stop Technology
As soon as the vehicle ignition is turned on, your Dash Cam will start to record automatically.
When the ignition is turned off, the Dash Cam will perform an automatic shutdown process.

Intelligent Parking Mode
Intelligent Parking Mode automatically starts recording when motion is detected, keeping your car safe when parked.

Built-in Microphone & Speaker
Record audio to compliment the video recordings.

Nextbase™ Cloud Service
View and share your footage online using the MyNextbase Cloud™ service. Upload your video to the Nextbase™ server to get a shareable link to send to friends, insurers, and social media. Upload your videos via the file upload area on Mynextbase.com . The uploaded file will be deleted after 30 days, when the link will also expire.

Camera Parts and Controls

See below to identify the parts and controls of your Dash Cam

See below to identify the parts and controls of your Dash Cam

In Vehicle Installation

Please follow the instructions below for the first-time installation of the Dash Cam. For day to day use, simply remove the camera from the mount as required.

1. Insert MicroSD Card
   Insert a suitable MicroSD card (Class 10, U1, minimum 48/Mbps) in to the Dash Cam, taking care that the gold contacts are facing towards the LCD screen side of the Dash Cam.
   Push the memory card until it clicks into place.
   Note:
   – Use the edge of a small coin (or similar object) to push the memory card in place if required.
   Take care that card has ‘clicked’ into place, a second push inwards will release the memory card.
   – For best results, we recommend using Nextbase™ branded SD cards.
   – Do not remove or insert the memory card when the Dash Cam is turned on.
   This may damage the memory card.
2. Remove dust cover from the Dash Cam
   Remove the dust cover that is located on the front of the Dash Cam to gain access to the mounting point.
   To remove the dust cover, lift the cover away from the body of the Dash Cam.
   Note:
   – If the Dash Cam is not to be used for a period of time replace the dust cover to help keep the components free of dust or other contaminants.
   
3. Attach the mount to the Dash Cam
   Place the mount in space under the dust cover on the Dash Cam. Once in place, magnets within the mount and camera will hold the two parts together.
   See page 16 for more information on changing mounts attachments.
   
4. Connect car power cable
   Connect the supplied car power cable (1) to the Dash Cam Mount’s USB port.
   Do NOT connect the power cable to the USB port on the Dash Cam.
   
5. Plug the power cable into the 12-24Vdc outlet of your vehicle
   The Dash Cam will automatically power on and start recording once power is available.
   In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on.
   Also available to purchase is a Nextbase Hardwire Kit. This connects your Dash Cam directly to the vehicle’s fusebox to power it leaving your 12Vdc outlet available for Phone / Sat Nav charging.
   The Nextbase™ Hardwire Kit includes the necessary 12-24Vdc to 5Vdc convertor and battery protection circuitry. See pages 9-10 of the Nextbase™ Accessories Manual for further information.
   Route the power cable around the windshield to the 12-24Vdc socket, ensuring that your view is not obstructed, and that the cable is not a distraction. Use the cable fitting tool (bottom, left) included with your Dash Cam to more easily open the lining of your vehicle, within which you can stow the cable.
   See page 15, ‘Positioning your Dashcam’ for more details.
   Note: – Do NOT wire the Dash Cam directly to a 12Vdc supply by cutting the cigarette plug off the end of the cable, or permanent damage will result.
   
6. Remove the adhesive cover layer
   Peel back the red cover layer to expose the adhesive surface, ready to mount on your windscreen.
   
7. Straighten the Dash Cam
   Ensure that the Dash Cam is horizontal and faces straight out of the windscreen.
   Ensure that objects on the Dash Cam display appear level, and adjust as required.
   
8. Attach the Dash Cam to the windscreen
   When you are satisfied with the placement and orientation of the Dash Cam, firmly place the mount on the windscreen.
   
9. Adjusting the Dash Cam
   With the mount attached to the windscreen, ensure that objects on the Dash Cam display are level and adjust as required. Ensure that the road ahead is at the centre of the image, in the central third of the display. If too much of the sky is visible it may risk underexposing details on the road; ensure that the road ahead is clearly visible on the Dash Cam display.
   Do NOT attempt to adjust the Dash Cam while driving.
   

Positioning Your Dash Cam

Please read and follow the notes below for the safe operation of your Dash Cam within your vehicle.

Before installing the Dash Cam on your windscreen, check the state and local laws and ordinances where you drive. Some laws prohibit or restrict the placement of objects on the windscreen of a motor vehicle.
IT IS THE USER’S RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDINANCES.
Always mount your Nextbase™ Dash Cam in a location that does not obstruct the driver’s view of the road.
Nextbase™ does not assume any responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance relating to the use of your Nextbase™ Dash Cam.
As per the installation instructions, you must install the Dash Cam so it does NOT obstruct the driver’s view of the road (red, above), preferably on the passenger side of the vehicle and behind the rear view mirror.
The Dash Cam needs to view through a clear section of windscreen in an area swept by the windscreen wipers (green, above). However, the Dash Cam should be installed so as not to intrude significantly within the wiped area. A 40mm intrusion into the green wiped area is the maximum permitted by UK law.

Hiding the Cable
Make sure the hanging cable does not obstruct your view out of your rear window. Ensure that there are no kinks in the cable as you are stowing it. If necessary, use the cable tidy tool supplied with your Dash Cam; this can be used to help pry open the lining of your car (see illustration below, right).

Notes On Positioning Your Dash Cam

• Do NOT mount the Dash Cam in front of the driver, as depicted by the red area in the illustration to the left of this page.
• When installing the Dash Cam in a vehicle, always place the device securely against the windscreen and where possible conceal the power cable under trim.
• Make sure that the Dash Cam power cable does not interfere with the drivers operating controls, such as the steering wheel, pedals or gear levers.
• Do NOT mount the Dash Cam in front of an airbag field of deployment or in a position to obscure any mirrors.
• It is recommended NOT to operate the Dash Cam whilst driving. The automatic Start-Stop technology incorporated within the device negates any need to operate the controls whilst driving.
• Adjust any settings or review recordings whilst stationery, not whilst driving.
• After the preliminary SETUP has been carried out upon the Dash Cam, adjust the Screen Saver setting to ON; this will blank the screen automatically 30 seconds after starting the vehicle and therefore the screen will NOT be a distraction in any way to the driver.

Accessories

Multiple accessories can be purchased for your Nextbase™ Dash Cam, including a Hardwire Kit and Polarising Filter that can effect how best to set up your Dash Cam.
For more information on how to position and use these products, download the ‘Nextbase Accessories Manual’ PDF at www.nextbase.com

Mount Attachment

To attach the mount, align the pins on the mount with the holes on the adhesive attachment and slide firmly to the right until you hear the pieces click into place. To remove the top, simply do the reverse, slide it to the left until you can lift it off of the mounting pins.
Ensure the windshield is free of grease and dirt before mounting; if necessary, clean with a warm, clean cloth.
Ensure that the Mount and Dash Cam do not obstruct the driver’s view.

Removing Adhesive Residue
If you wish to remove the adhesive mount from your windscreen, use hot soapy water or an alcohol based solution to get rid of any sticky residue and ensure that your windscreen remains clean and clear.
Leaving residue on the windscreen for an extended period of time will make it harder to remove.
If hot water or an alcohol based solution proves ineffective, it may be necessary to use a small sharp blade. If this is the case, protect your fingers and use the blade flat against the surface of the glass to avoid causing scratches.

First Time Use

Before you can use your Dash Cam, it is essential that it is fully charged. Connect your Dash Cam via the USB port to a home power source such as a PC or home USB socket for approximately 2 hours.

To ensure the set up of this Dash Cam is as quick and simple as possible, there is an easy to follow ‘First Time Use’ menu.
This menu is used to set the Language, Time, and Date.
This menu will appear when:

1. The Dash Cam is first turned on.
2. There has been a Firmware Update applied to the Dash Cam and ‘Keep User Settings’ has been set to OFF. If It is set to ON, your Dash Cam will start normally, with your settings intact.
3. After the Dash Cam’s settings have been reset, by using the ‘Default Settings’ option in the Setup Menu.

Follow the on-screen instruction to select the Language, Time, and Date.

Note:
– The First Time Use menu is in place to get you up and running quickly and smoothly. The settings you choose during First Time Use can be changed at any later time in the setup menus.

Menus

Press the ‘Menu’ button to enter the Dash Cam’s ‘Video Menu’ system.

The default settings have been carefully selected to allow you to use your Dash Cam without the need to change any settings. However, should you wish to change a setting then please see below:

• Use the up and down buttons to highlight the function that you’d like to change and press the OK button to enter the settings submenu.
• Once in the submenu, use the up and down buttons to highlight the required setting and then press OK to confirm your selection and return to the Video Menu.
• Press the MENU button twice to return to video mode.

Note:

• Menus are not accessible whilst the Dash Cam is recording.
• Within the Setup Menu which is accessed by pressing the MENU button twice, there is a ‘Default Settings’ option to allow you to reset the Dash Cam to the factory defaults, if required.

Video Menu Options

1. Exposure
   Adjust the exposure level for different lighting conditions.
   Options: Values range from -6 to +6
   Default: 0
2. Audio Recording
   Turn On/Off the microphone for video recording
   Options: On and Off
   Default: On
3. Video Length
   Set the length of the individual recorded video files.
   The Dash Cam will continue recording, filling the memory card.
   When the memory card becomes full, the oldest file will be automatically deleted to make space for the new recording.
   Note: Card becomes full you will be prompted to format/clear the SD Card.
   Protected Files will not be overwritten. If the SD
   Options: 1 minute, 2 minutes, 3 minutes
   Default: 1 minute
4. Time & Date Stamp
   Turn On/Off the time and date stamp shown on recorded files at the bottom of the screen.
   Options: On and Off
   Default: On
5. G Sensor
   Turn off or adjust the sensitivity of the internal G Sensor.
   The G Sensor detects forces which will protect the current recording in the event of a collision. The higher the G Sensor sensitivity, the less force will be needed to trigger automatic file protection.
   Note: wish to adjust this to LOW. Likewise if you have soft suspension you may wish to adjust this to HIGH If you have a car with firm suspension you may
   Options: Off, Low, Medium, High
   Default: Medium

Press the ‘Menu’ button again when in ‘Video Menu’ to enter the Dash Cam’s ‘Setup Menu’ system.

Setup Menu Options

1. Format SD Card
   Format the inserted SD card. This will delete all content.
   Note: For stable performance, it is recommended that you format the memory card every 2-3 weeks. You should only do this AFTER you’ve downloaded any files from the card that you may want to keep.
2. Time & Date
   Adjust the date / time as required using the OK button to toggle through the fields and use the up & down buttons to  set the values.
   Press MENU to exit and return to the Setup Menu.
3. Language
   Select your preferred language
   Options: English, Danish, German, Spanish, French, Italian, Dutch, Norwegian, Finnish, Swedish, Czech, Romanian, Slovak, Polish
   Default: Follows your First Time Use selection.
4. Screen Saver
   Turn on the screen saver function to shut down the screen after 30 seconds of inactivity. Press any button to reactivate the display.
   Options: On and Off
   Default: Off
   
5. Device Sounds
   Turn On/Off the beep that sounds when a button is pressed. Start up sound is NOT muted.
   Options: On and Off
   Default: On
6. Auto Power Off
   Adjust the timing of the Auto Power Off function, this can be used to continue recording in event of loss of power within in the vehicle.
   Options: 10 seconds, 1 minute, 2 minutes
   Default: 10 seconds
7. Number / License Plate
   Enter the registration number for your vehicle, this will then be shown on the recorded video files.
   Use the OK button to toggle through the fields and use the up & down buttons to set values.
8. Parking Mode
   When Parking Mode has been turned on, the Dash Cam enters standby mode when the 12Vdc supply has been turned OFF (typically removing your ignition key).
   The Dash Cam will also enter standby mode if no physical movement is detected for 5 minutes, Should physical movement of the vehicle be detected, the Dash Cam will power on and start recording a 30 second protected video.
   If no further physical movement is detected then the Dash Cam will return to standby mode. If physical movement is detected subsequently, then the camera will continue to record normally, i.e. driving once more.
   Options: On and Off
   Default: Off
   Please note there will be a delay between the trigger event and the start of the recording while the Dash Cam turns on.
   
9. Recording History
   In some territories, there are laws prohibiting the amount of footage your Dash Cam can store.
   The default is ‘Maximum’, where your Dash Cam records and stores videos without restriction.
   However, if ‘Minimum’ is selected, your Dash Cam will be limited to storing only 4 files at a time.
   When a new file is recorded it will overwrite the oldest file, keeping the number of files stored at a maximum of 4.
   Note: When you select ‘Minimum’, you will be asked to confirm that all files will be deleted. Back up any files you wish to keep (including protected files) before switching to ‘Minimum’ storage mode.
   While recording, protected files do not contribute towards the 4 video limit. These videos are assumed to be of interest as they are protected either by abnormal G Sensor activity or by a manual activation of the protect function.
   Options: Maximum and Minimum
   Default: Maximum
10. System Info
    Information such as Dash Cam model, Battery Status, Firmware version, and SD card data can be found here.
    This information covers multiple screens (pages), press OK scroll through as required.
11. Keep User Settings
    Turn this On in order to keep your preferred individual user settings during the Dash Cam update process.
    Select Off in order to clear all user settings and return them to defaults during the Dash Cam update process.
    Options: On and Off
    Default Setting: Off
12. Default Settings
    Resets your Dash Cam to the default settings.

Video Mode

The key below explains the various information displayed on the screen when your Dash Cam is in Video mode. Some icons will only be displayed once the relevant function has been selected within the Video menu, as described below.

1. Audio Recording ON
   Can be switched OFF in the Dash Cam Setup Menu.
2. Parking Mode ON
   Can be switched OFF in the Dash Cam Setup Menu.
3. File is Protected
   Indicates that the file has been protected. This will appear either when the ‘protect’ button is manually pushed, or when the G Sensor is triggered.
4. Recording Duration
   Up to 3 minutes. Length can be changed in Setup Menu.
5. Stamps
   These will appear on the recorded file (license place, time/date, etc).
6. Time Display
   Can be manually changed in Dash Cam Setup Menu.
7. Date Display
   Can be manually changed in Dash Cam Setup Menu.

Photo Mode

The key below explains the various information displayed on the screen when your Dash Cam is in Photo mode. Some icons will only be displayed once the relevant function has been selected within the Photo menu, as described below.

8. Photo Mode
Press ‘Mode’ Button to select Video, Photo, and Playback.
9. Time Display
Can be manually changed in Dash Cam Setup Menu.
10.Date Display
Can be manually changed in Dash Cam Setup Menu.

Playback Mode

The key below explains the various information displayed on the screen when your Dash Cam is in Playback mode.

11. File Name
Photos are saved as JPEGs.
Videos saved as .AVI.
12. Recording Duration
Elapsed Time.
13. Time/Date Display
Can be manually changed in the Dash Cam Setup Menu.
14. Navigation
Use the Up and Down buttons on the right of the Dash Cam to scroll through the photos and videos stored on the SD card.
15. Playback options;
Press Record to Play/Pause. Press Mode to Stop and return to the preview screen.

Playback Mode Menus

If the Menu button is pressed while scrolling through your videos, you will open the Playback Menu, giving you the option to protect, unprotect, or delete files. You can use the Menu  button as a back button while in the menu system.

How to Delete Files
Using the Up and Down buttons, select ‘Delete Files’ On the next page, you will be asked if you want to ONLY delete the video/photo you are on, or if you would like to delete all (unprotected) files.
Once you have made your selection, you will be asked to confirm your choice.
When your choice is confirmed, you will be redirected back to Playback Mode to continue scrolling through your videos and photos.

How to Protect/Unprotect Files
Using the Up and Down buttons, select ‘Protect Files’
On the next page, you will be asked if you want to Protect or Unprotect the file you are currently on.
You cannot protect a file that is already protected, and likewise cannot unprotect a file that is already unprotected. This action will have no effect and will divert back to the Playback display.
When you successfully protect or unprotect a file, a red padlock icon will be added or removed, respectively. This will be visible on the
Playback display which you will be immediately diverted to, following your selection.

The red padlock icon will be added when you PROTECT a video/photo.
The red padlock icon will be removed when you UNPROTECT a vido/photo.

PC Connection

Use the supplied USB cable to connect the Dash Cam directly to your PC via the socket on top of the Dash Cam; do NOT connect the USB cable to the Powered Mount.
Once connected the Dash Cam will turn on with two options available; ‘Access Files’ and ‘ Power On ’, as described below.
Use the UP and DOWN buttons to select required function and press OK to confirm selection.

Access Files (Windows)
When this option is selected, the Dash Cam will function as a card reader for your PC. An extra drive will appear, e.g. NEXTBASE (D:) and you will be able to view / manage the stored files upon the MicroSD card within the Dash Cam. You will be able to view your files using your system’s default media player.
The Dash Cam is a ‘read-only’ device, therefore uploading files to the SD card when in Mass Storage mode is not possible. If you wish to add files to the SD card you can do this using a MicroSD card reader.

Access Files (Mac)
When this option is selected, the Dash Cam will function as a card reader for your MAC. The ‘Nextbase’ external USB disk icon will appear on your MAC and you will be able to view and/or manage stored files.
You will be able to view your files using your system’s default media player.
The Dash Cam is a ‘read-only’ device, therefore uploading files to the SD card when in Mass Storage mode is not possible. If you wish to add files to the SD card you can do this using a MicroSd card reader.

Power On (Windows & Mac)
When this option is selected, the Dash Cam will power on with all functions available. This includes charging of the internal battery; a full charge will take approximately 2 hours.

ALWAYS turn OFF the Dash Cam before disconnecting from your PC/Mac.

Firmware Update Information

Firmware controls the basic functioning of the Dash Cam. If your Dash Cam is not functioning correctly, you may need to update the firmware.
Firmware updates may also be released to fix bugs, and improve the general functionality of the Dash Cam. In short, it’s important to keep the firmware on your Dash Cam up to date so it can operate to it’s full capacity. We recommend you regularly check for updates to get the most from your Dash Cam.

How to Check your Dash Cam’s current Firmware Version
Within the Setup Menu, on page 3, select `System Info’. Here you will find information relating to your Dash Cam, including what firmware version is currently active (i.e R05.3).

How to Update Firmware on your Dash Cam
Connect your Dash Cam’s SD Card to PC using a card reader. This will open a file explorer drive, (e.g) Removable Disk (E:) and show the contents of your SD Card. Go to the `Support & Downloads’ page on nextbase.com and download the newest firmware version (i.e R05.4); this will download as .bin file. Drag and drop the .bin file to the SD Card explorer. Eject the SD card and insert it back into your Dash Cam. When you connect the power cable your Dash Cam will turn on, and will automatically begin updating. While updating, both the NextbaseTM logo beneath the screen and the red LED to the left of the screen will start flashing.
Once the update has been completed, the logo and LED will stop flashing, and your Dash Cam will automatically restart.

Notes: If `Keep User Settings’ is turned ON in the Setup Menu, your Dash Cam will boot up normally, straight into video live view mode, ready to use. If `Keep User Settings’ is turned OFF, after the update is complete, the Dash Cam will boot up into the First Time Use menu, which must be completed before the Dash Cam can be used. Be sure to externally back up any files you want to keep before updating the firmware.

Nextbase™ SD Cards

For best results, we recommend using our Nextbase™ branded SD cards with your Dash Cam, available to purchase online from nextbase.com or your nearest retailer.

We recommend formatting your SD Card every 2 weeks to ensure that there is enough space to record and store new footage. When formatting, protected files WILL be deleted. If you wish to keep these protected files, you must back then up externally, most commonly by saving files to a desktop computer, or another secure storage point. To clear your SD card, go to the `Format SD Card’ function in your Dash Cam’s Setup settings Menu and follow the instructions on screen.

Which SD Card should I use in a Dash Cam ?
Nextbase have designed an SD card specifically to fulfill the needs of our Dash Cams. We work directly with the factory to ensure consistency of the SD card quality. Nextbase have spent years testing, trialling, and developing SD cards to optimise their performance with our Dash Cams.
Due to the differences in technology an SD card that works with a mobile phone or computer won’t necessarily work well with a Dash Cam. The main differences and selling points between all SD cards are the storage size (16GB, 32GB, 42GB, etc.) and the READ speed. READ speed isn’t too important when it comes to Dash Cams, as a Dash Cam WRITES data to the SD card when recording. The ability to maintain a high WRITE speed consistently is what Nextbase SD cards are designed to do better than any other SD card. Any drop/fluctuation in WRITE speed within the SD card causes the Dash Cam footage to buffer, and in some cases will stop the recording entirely. Years of research and design allows our SD card controller and Firmware on the SD card to achieve the requirements of our Dash Cams, where other SD cards cannot.
A large requirement our Dash Cams place on the SD card is the ability to re-WRITE over the oldest footage when the SD memory becomes full. This means the Dash Cam is always Loop Recording – when the Dash Cam is on it is always recording. From our experience most non-Nextbase SD cards struggle to do this as effectively as our SD cards, this has caused footage to be missing and footage to fail to record in the first place.

SD Card Q&A

If you experience any of the faults listed above, we strongly recommend that you replace your SD card with a Nextbase one. All our dashcams are tested using Nextbase branded SD cards, therefore we cannot attest to the compatibility of other manufactures products. For best results we always recommend using Nextbase branded cards.

Best practice is still to Format the SD card occasionally – for a heavy user this would be every two weeks, for a light user this would be once a month.

www.nextbase.com
 support@nextbase.com

CE Mark Information

The CE (Conformité Européenne) mark is a symbol (below) printed on products to indicates it’s conformity with health, safety, and environmental protection standards for products sold within Europe. It is used on many products across many industries (for example, SD cards) as a mark of compliance with European standards.

In recent years, many variations of this mark have appeared in the market. While similar, the mark above is the only variant that is associated with, and declares compliance with European standards. Other marks, like the ones below, do not guarantee that the product it is attached to or is compliant with European standards for sale in the European Economic Area (EEA).

The main difference between a legitimate CE mark and a misused CE mark is the spacing of the letters. The letters, C and E, tend to be formed identically, however the spacing between them is what separates the real from the false. The images below show how the letters should be spaced. There will never be additional markings such as a border or circle used on a legitimate CE Mark.

As products without the correct CE marking are not guaranteed to comply with European Health and Safety standards, those products are potentially less reliable and could pose a safety risk. Be aware of the CE marking when purchasing electrical products. The descriptions above of false CE markings are not comprehensive; be aware that new variations may appear on the market.

Software License Agreement

By using the device, you agree to be bound by the terms and conditions of the following software licence agreement.
NextbaseTM grants to you for the period for which you possess the relevant device a non-exclusive, non-transferrable (save in circumstances where you sell or transfer the relevant device to another person ­ please see below for more details) a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product together with any documentation and material (whether printed or on-line) made available by NextbaseTM in respect of the Software (the “Documentation”). Title, ownership rights, and intellectual property rights in and to the Software and the Documentation remain in NextbaseTM and/or its third-party providers.
You acknowledge that the Software and the documentation is the property of NextbaseTM and/or its third-party providers and is protected throughout the world by intellectual property rights laws and treaties, including the United States of America and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which source code is not provided, are valuable trade secrets of NextbaseTM and/or its third-party providers and that the Software in source code form remains a valuable trade secret of NextbaseTM and/or its third-party providers.
You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software or the Documentation. You agree not to copy, rent, lease, sub-license, loan, translate, merge, adapt, vary, alter or modify, the whole or any part of the Software or Documentation nor permit the Software or any part of it to be combined with, or become incorporated in, any other programs You agree not to export or re-export the Software or Documentation to any country in violation of the export control laws of the United States of America or the export control laws of any other applicable country.
If you use MyNextbase ConnectTM or MyNextbase PlayerTM, you must comply with the applicable terms of use and acceptable use policies, which can be found at www.Nextbase.com.

Warranty

Limited Warranty
This limited warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state (or by country or province). NextbaseTM does not exclude, limit or suspend other legal rights you may have under the laws of your state (or country or province). For a full understanding of your rights you should consult the laws of your state, country or province.
NextbaseTM Liability extends to the cost of the Dash Cam alone. Any recordings which have not taken place or recoverable from the SD card for whatever reason are not covered by the product warranty. No liability for costs incurred due to corrupt, missing, erased video recordings will be accepted. No claims for additional costs outside the cost of the Dash Cam itself will be accepted.
NextbaseTM products are warranted to be free from defects in materials or workmanship for one year from the date of purchase, with batteries warranted to be free from defects in materials or workmanship for six months from the date of purchase. Within this period, NextbaseTM will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labour, provided that the customer shall be responsible for any transportation cost. This Limited Warranty does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts, such as batteries, unless product damage has occurred due to a defect in materials or workmanship; (iii) damage caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (iv) damage caused by service performed by anyone who is not an authorised service provider of NextbaseTM; (v) damage to a product that has been modified or altered without the written permission of NextbaseTM, or (vi) damage to a product that has been connected to power and/or data cables that are not supplied by NextbaseTM, or (vii) damage to a product that has been connected to 12Vdc directly, having cut off the Cigarette Lighter plug which contains the 12/24Vdc to 5Vdc adaptor. In addition, NextbaseTM reserves the light to refuse warranty claims against products or services that are obtained and/or used in contravention of the laws of any country.
To the maximum extent permitted by applicable law, the warranties and remedies contained in this limited warranty are exclusive and in lieu of, and NextbaseTM expressly disclaims, all other warranties and remedies, whether express, implied, statutory, or otherwise, including without limitation any implied warranty of merchantability or fitness for a particular purpose, statutory remedy or otherwise. This limited warranty gives you specific legal rights, and you may have other legal rights, which vary from state to state and from country to country. If implied warranties cannot be disclaimed under the laws of your state or country, then such warranties are limited in duration to the duration of this limited warranty. Some states (and countries and provinces) do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
In no event shall NextbaseTM be liable in a claim for breach of warranty for any incidental, special, indirect or consequential damages, whether resulting from the use, misuse or inability to use this product or from defects in the product. Some states (and countries and provinces) do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you.
If during the warranty period you submit a claim for warranty service in accordance with this Limited Warranty, then NextbaseTM will, at its option: (i) repair the device using new parts or previously used parts that satisfy NextbaseTM’s quality standards, (ii) replace the device with a new device or a refurbished device that meets NextbaseTM’s quality standards. Such remedy shall be your sole and exclusive remedy for any breach of warranty. Repaired or replaced devices have a 30 day warranty. If the unit sent in is still under its original warranty, then the new warranty is 30 days or to the end of the original 1 year warranty, whichever is longer.
Before seeking warranty service, please access and review the online help resources available on www.nextbase.com. If your device is still not functioning properly after making use of these resources, contact a NextbaseTM Authorised service facility in the original country of purchase or follow the instructions on support at www.nextbase.com to obtain warranty service.
If you seek warranty service outside of the original country of purchase, NextbaseTM cannot guarantee that the parts and products needed to repair or replace your product will be available due to differences in product offerings and applicable standards, laws and regulations. In that case, NextbaseTM may, in its sole discretion and subject to applicable laws, repair or replace your product with comparable NextbaseTM products and parts, or require you to ship your product to a NextbaseTM Authorised service facility in the country of original purchase or to a NextbaseTM Authorised service facility in another country that can service your product, in which case you will be responsible for complying with all applicable import and export laws and regulations and for paying all custom duties, V.A.T., shipping fees and other associated taxes and charges. In some cases, NextbaseTM and its dealers may be unable to service your product in a country outside of the original country of purchase or return a repaired or replaced product to you in that country due to applicable standards, laws or regulations in that country.

Online Auction Purchases of Non-New Goods
Products purchased through online auctions are not eligible for NextbaseTM warranty coverage. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. NextbaseTM will not replace missing components from any package purchased through an online auction.

International Purchases
A separate warranty may be provided by international distributors for devices purchased outside the United Kingdom depending on the country. If applicable, this warranty is provided by the local in-country distributor and this distributor provides local service for your device. Distributor warranties are only valid in the area of intended distribution.

Product Compliance Information

ACMA RCM Notice to Users in Australia & New Zealand
Having had regard to documents submitted, our Authorised Agent (Global Approvals ACN/ARBN 25 497 357 455) is satisfied that the in-vehicle accessory product NBDVR122 complies with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the Telecommunications Act 1997. The full compliance declaration, including the details of the applicable standards and documents submitted can be found on our website at: https://www.nextbase.com/certifications

Canadian ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
NMB-003 du Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CE
EU declaration of conformity is available at the following internet address: https://www.nextbase.co.uk/certifications/
UKCA
UK declaration of conformity is available at the following internet address: https://www.nextbase.co.uk/certifications/

FCC Declaration of Conformity Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This appliance and its antenna must not be co-located or operated conjunction with any other antenna or transmitter.
• A minimum separation distance of 20cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.

Supplier’s Declaration of Conformity
This Declaration of Conformity is hereby issued according to Chapter 1, Subpart A, Part 2 of Title 47 of the Code of Federal Regulations by:

Portable Multimedia Limited, trading as
Dorna House Two, 52 Guildford Road, West End, Surrey, GU24 9PW, United Kingdom
122 Dash Cam
Model numbers NBDVR122, FE-NBDVR122, NBDVR122-WHT, FE-NBDVR122-WHT,
VYDVR122, FE-VYDVR122, NBDVR123, FE-NBDVR123, NBDVR124, FE-NBDVR124,
NBDVR122L, FE-NBDVR122L
complies with the applicable requirements of FCC Rule Part 15/Part 18
RESPONSIBLE PARTY — U.S. CONTACT INFORMATION:
Violette Engineering Corporation
6731 Whittier Avenue
McLean, VA 22101
info@violettecorp.com

FCC Compliance Statement: The responsible party warrants that each unit of equipment marketed under this Declaration of Conformity will be identical to the unit tested and found acceptable with the standards, and that the records maintained by the responsible party continue to reflect the equipment being produced under such Supplier’s Declaration of Conformity and continue to comply within the variation that can be expected due to quantity production and testing on a statistical basis.

By: GRAHAM LAMBERT (TECHNICAL DIRECTOR)
Date: 03/08/21

122 FCC Suppliers Declaration of Conformity

FCC CAUTION:
This product does not contain any user-serviceable parts. Repairs should only be made by an authorised Nextbase™ service centre. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations.

FCC CAUTION:
This product does not contain any user-serviceable parts. Repairs should only be made by an authorised NextbaseTM service centre. Unauthorized repairs or modifications could  result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations.

Dash Cams
Eyes on the Road
NextbaseTM offers a wide range of Dash Cams to best suit your driving needs.

Rear View Cameras
Ready for the Drive
The new rear facing cameras offer views on the road behind as well as ahead, protecting you from all angles.

Accessories
Ready for the Drive
Everything you might need for video storage, Dash Cam protection, and more.

For more details on our full range of Dash Cams and Accessories, download the Nextbase™ Accessories Manual, available from www.nextbase.com

Nextbase™ Services and Software

MyNextbase.com Cloud™ Access your footage anywhere in the world using the free online web portal. (Internet connection required)	MyNextbase Connect™ The new Nextbase App to transfer, view, and edit footage on your smart-phone or tablet.	MyNextbase Player™ View, edit, and share your footage on your computer with the new easy to use free PC/Mac software.

Dash Cam Services Compatibility

Dash Cam Functions

www.nextbase.com

NBDVR122-ENG-R11