NETVUE NI-1901 1080P Wifi Outdoor Security Camera
Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ-ment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
FCC (USA) 15.9 prohibition against eavesdropping except for the operations of law enforcement officers conducted under lawful authority, no person shall use, either directly or indirectly, a device operated pursuant to the provision of this part for the purpose of overhearing or recording the private conversations of other unless such use is authorized by all of the parties engaging in the conversation.
CE RED
This product can be used across EU member states.
WHAT’S IN THE BOX
MORE ABOUT VIGIL CAMERA
HOW TO INSERT MICRO SD CARD
Vigil Camera comes with a built-in card slot which supports up to 128GB MicroSD card. Once you insert the storage card, the camera will automatically start to record and store videos on the storage card. Videos can be replayed by dragging the time line below the live feed screen in Netvue App.
Step1: Loosen the screws. Take off the cover gently since wires a reattaching to it.
Step 2: Insert Micro SD card. Make sure you insert it in the correct direction. The back of the card should face up.
Step 3: Put the cover back and tighten the screws.
READ BEFORE INSTALLING
- Keep the Vigil Camera and all accessories out of reach of children and pets.
- Power supply voltage that is required to operate Vigil Camera should be 12VDC (≥1000mA).
- The product can only be used in proper temperature and humidity: Operating temperature: -20°C – 50°C (-4°F-122°F) Operating humidity: 0-90%.
- Please do not expose the camera lens to direct sunlight.
- Please do not install the camera to the place that is likely struck by lightning.
- Power Source: Corded-Electric
- 4GHz Wi-Fi network only, not for 5.0GHz
SET UP WITH NETVUE APP
Please add the Vigil Camera on to your Netvue account through Netvue App before mounting it outside.
CONNECTING METHOD
There are two ways of adding Vigil Camera onto Netvue App: Wireless Connection and Wired Connection.
WIRELESS CONNECTION
Wireless connection uses Wi-Fi to connect the camera to the App. It is the easiest way if the installation spot is close to your router and have a strong Wi-Fi signal. Please note that thick or insulated wall may weaken the signal dramatically. Before you decide to choose this connection method, check the Wi-Fi signal at your installation spot. Be sure to use 2.4GHz Wi-Fi.
WIRED CONNECTION
If the Wi-Fi signal strength is weak at your installation spot, the Ethernet cable connection might be your solution. An Ethernet cable is required for this connection method. Plug one end of the Ethernet cable into Vigil Cam, and the other end into the LAN port on your router. Then follow the in-app instruction to complete the following setup process.
ADD CAMERA TO NETVUE APP
- Power on Vigil Camera with the provided power adapter. You should hear a chime once it has fully started.
- Download Netvue App from AppStore or Google Play on to your phone.
- Register an account if you are a new user to Netvue. If you alreadyHave an account, log into your account.
- Tap“+” at the top right corner to add a new device.
- A product list will show up, choose “Vigil Camera.”
- Choose a connecting method.
- Follow the in-app instruction to complete the entire set up process.
- Test the video streaming.
Now move to Vigil Camera installation.
VIGIL CAMERA INSTALLATION
Check following things before you starting to drill holes on your wall:
- Vigil Camera has been successfully added to your Netvue App and is able to stream video.
- Have planned the cable route. Measured the length of the power cable and Ethernet cable (if you plan to use Ethernet connection) you will need.
Step 1
Take off the anti-dust cap. Attach the provided antenna to Vigil Camera.
Step 2
Find a good installation spot.
- We recommend installing the Vigil camera just 7-10 feet (2-3 meter) above the ground for a better two-way audio experience.
- There is a power outlet nearby.
- Test whether Vigil camera can stream video smoothly at the spot.
- Make sure nothing blocks the camera’s sight.
Step 3
Before you starting to drill, make sure you know the locations of wall-in pipes and electrical wires. (If you are not comfortable with drilling holes, please consult with a licensed electrician.)
Install Camera on Concrete or Brick:
Use the provided drilling template to mark the position of holes on your wall. Use the provided drill bit to drill three holes, and then install anchors to hold screws.
Install Camera on Wood:
Use the provided drilling template to mark the position of holes on your wall. Directly tighten the included screws to secure the camera.
Step 4 (Wired Connection):
Read this step if you are using wired connection, otherwise skip to Step5. This step requires the skill of making an Ethernet cable. Consult with the electrician if you are not sure how to do it.
A weatherproof tube is needed for Ethernet cable to avoid leaking water into Ethernet cable port. Cut off the Ethernet cable at the length you want. Insert the cable into the weather proof tube, and carefullyattachRJ-45 connect or to the cut ends. Test the cable is working before installing.
Things you need:
- Bare copper Ethernet cable
- RJ45connector
- RJ45crimpingtool
Step 5
Use the hex key to loosen screws on the hinge. Point the camera to your designate direction, then tighten the screws.
STATUS LIGHT
Netvue Vigil Camera uses status light to communicate.
SUPPORT
240 W Whitter Blvd Ste A, La Habra, CA 90631 © 2010-201 Netvue Technologies Co Ltd. All Rights Reserved. Version 1.0
FAQs
Do NETVUE NI-1901 outdoor security cameras record all the time?
The majority of home security cameras are motion-activated, which means that when they notice motion, they will start recording and inform you. Some people have the ability to continuously record video (CVR). An fantastic tool for ensuring home security and the peace of mind that comes with it is a security camera.
How long does an NETVUE NI-1901 outdoor security camera last?
With the right maintenance and attention, outdoor security cameras may endure for at least five years.
Do NETVUE NI-1901 security cameras work if the WiFi is off?
You can instal cameras without an internet connection, yes. Many cameras exclusively record locally, using hard drives or micro-SD cards as local storage.
How far can a NETVUE NI-1901 security camera be from WiFi?
A wireless camera shouldn’t be placed too distant from the main hub or wireless router. A wireless camera’s range can go up to 500 feet or more if there is a direct line of sight. The range is often 150 feet or less within a house, however this isn’t always the case.
What is the range of NETVUE NI-1901 outdoor security cameras?
When there is a direct line of sight between the camera(s) and the receiver, wireless security cameras work best. Digital wireless cameras typically have a range of between 250 and 450 feet when used outside with a clear line of sight.
Do NETVUE NI-1901 outdoor security cameras work at night?
Infrared LEDs are increasingly commonly integrated into security cameras to give night vision in dim or no light environments.
Can NETVUE NI-1901 outdoor security cameras be hacked?
Home security cameras are no exception to the rule that any internet-connected gadget is vulnerable to hacking. Wi-Fi cameras are more prone to attack than wired ones, while cameras with local storage are less prone to attack than those that store their video on a cloud server. But any camera can be compromised.
Should you hide NETVUE NI-1901 outdoor security cameras?
Property owners should think about where to place their cameras in front of potential intruders. It’s a good idea to conceal your security cameras so that robbers can’t see them.
Can I connect my NETVUE NI-1901 security camera to my phone without WiFi?
A wired security camera does not require a wifi connection to operate if it is attached to a DVR or other storage device. As long as you have a mobile data plan, many cameras now offer mobile LTE data, making them an alternative to wifi.
What makes NETVUE NI-1901 security cameras go offline?
Why Your Security Cameras Might Go Offline. There are generally two causes for security camera inactivity. Either the router is too far away, or there is not enough bandwidth. However, there are other elements that may also play a role in cutting off a security camera’s internet connection.
Can I use my old phone as a NETVUE NI-1901 security camera without internet?
For your phone to function as a security camera, you will need an app. You will require an internet connection in order for that app to operate. We have included a list of the reliable apps for remote watching and listening on an old phone.
Can NETVUE NI-1901 security cameras see in the dark?
A light source that can illuminate the space beneath the camera is necessary for it to attempt to see in the dark. The night vision illuminators that go with consumer cameras, however, are exclusively meant for close range use and have a fixed brightness.
How much speed does a NETVUE NI-1901 security camera need?
The absolute minimum needed to watch a security camera system remotely is an upload speed of 5 Mbps. Remote viewing of the lower quality or substream is adequate but unrefined at 5 Mbps. We advise having an upload speed of at least 10 Mbps for the best remote viewing experience.
How far can an NETVUE NI-1901 outdoor camera be from base station?
Although the maximum distance varies, in a wide, open field, they can be as far apart as 300 feet. This ideal range will be reduced if there are several doors, walls, and other structures between each device.
How do you tell if a NETVUE NI-1901 security camera is watching you?
So you can determine whether your security camera is on or in operation. You may, for instance, turn on your monitor to check if your IP security camera is tape-recording. The IP security camera is on if the recorded video appears correctly.
Can NETVUE NI-1901 security cameras see inside cars?
Most of the time, security cameras can see inside cars. Glass is a transparent substance that allows light to pass through it, therefore security cameras can see through most varieties of glass.
