NetComm FAX Configuration Installation Guide

Contents hide

1 NetComm FAX Configuration

2 FAX configuration guide

3 Documents / Resources

3.1 References

4 Related Posts

NetComm FAX Configuration

FAX configuration guide

This section of the guide provides you with instructions to configure FAX parameters in VoIP settings.

Connect a computer and the modem using an Ethernet cable. (A yellow Ethernet cable is provided with your modem).

Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type following address into the address bar and press Enter. http://192.168.20.1
Type admin in both the User Name and Password text boxes and click OK.

Configure VoIP username, password and SIP server name as in the guide below. Navigate to Voice > VoIP status, the registration status should be up. Connect telephone line from the phone port to your handset and test whether you can make a call or not. http://support.netcommwireless.com/sites/default/files/NF18ACV-Generic-VoIP-Setup-Guide.pdf
Once you can make a call, connect telephone line from the phone port to your printer/fax.

Navigate to Voice > SIP Advanced Setting, select Fax Negotiate mode to Negotiate, tick Enable T38 support and Enable T38 redundancy support.

Note: The SIP service provide should also support fax. Contact your internet service provider to confirm if they support FAX service and collect the FAX settings.