Netac 3334388 Solid State Drive Instruction Manual

Netac 3334388 Solid State Drive

Product Usage Instructions

• Safety Instructions
  • It is important to read and follow all safety instructions provided with the Solid State Drive. Failure to do so may result in personal injury or damage to property.
• Cleaning and Care
  1. Disconnect the product from the power supply before cleaning.
  2. Clean the product with a dry, fibre-free cloth to maintain its performance.
• General Handling
  • Handle the product with care to prevent any damage. Avoid jolts, impacts, or falls, as they can harm the Solid State Drive.
• Operating Environment
  • Ensure the product is not under mechanical stress and protect it from extreme temperatures, strong jolts, flammable gases, steam, solvents, high humidity, moisture, and direct sunlight.
• Operation
  • Consult an expert if you are unsure about operating the product safely. If the product cannot be operated safely, discontinue its use immediately.

FAQs

• Q: How can I dispose of the Solid State Drive?
  • A: End users are responsible for deleting personal data from the WEEE to be disposed of. Different obligations regarding the return or recycling of WEEE may apply in countries outside of Germany. Contact local waste management authorities for proper disposal methods.
• Q: Can children use the Solid State Drive?
  • A: The product is not a toy and should be kept out of the reach of children and pets. Do not leave packaging material within their reach as it may pose a hazard.

Operating Instructions for download

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.

Intended use

• The product is intended for indoor use only. Do not use it outdoors.
• Contact with moisture must be avoided under all circumstances.
• If you use the product for purposes other than those described, the product may be damaged.
• Improper use can result in short circuits, fires, electric shocks or other hazards.
• The product complies with the statutory national and European requirements.
• For safety and approval purposes, you must not rebuild and/or modify the product.
• Read the safety instructions and any accompanying instructions carefully and store them in a safe place. Make this product available to third parties only together with the safety instructions and any accompanying instructions.
• All company names and product names are trademarks of their respective owners. All rights reserved.

Description of symbols

• The following symbols are on the product/appliance or are used in the text:
• The symbol warns of hazards that can lead to personal injury.

Safety instructions

Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

• Handling
  • Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Operating environment
  • Do not place the product under any mechanical stress.
  • Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
  • Protect the product from high humidity and moisture.
  • Protect the product from direct sunlight.
• Operation
  • Consult an expert when in doubt about the operation, safety or connection of the product.
  • If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
    • is visibly damaged,
    • is no longer working properly,
    • has been stored for extended periods in poor ambient conditions or
    • has been subjected to any serious transport-related stresses.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Cleaning and care

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.

1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.

Technical data

• Operating temperature ……………… 0 to +70 °C
• Operating humidity …………………… 0 – 95 % RH (non-condensing)
• Storage temperature …………………. -40 to +80 °C
• Storage humidity ………………………. 0 – 95 % RH (non-condensing)

MORE INFORMATION

Solid State Drive

• Item no: 3334388

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *3334388_V1_1224_jh_ss_en 1794577291-2 I1/O1 en