NENG TECHNOLOGY P5 Wireless Controller User Manual

 P5 Wireless Controller
User Manual

P5 Wireless Controller

1. SHARE Button
2. Indicator Light
3. Touch Screen/Downward Press Button
4. Options Button
5. L1 Button
6. Direction Button
7. Left Joystick/L3 Hall Joystick
8. Background Light
9. PS Button
10. R1 Button
11. Action Button △○×□
12. Right Joystick/R3 Hall Joystick
13. Turbo Button
14. Speaker
15. Type-c Charging Port
16. R2 Button (Hall trigger)
17. M1 / ○ Button
18. L2 Button (Hall trigger)
19. M2/ × Button
20. Reset Button
21. 3.5mm Headphone Jack

Features

1. This product is a P5 wireless controller, used to control various games on P5 console, allowing you to experience an immersive feeling during the game.
2. Compatible with all buttons, motor corresponding function, Touch function, stereo headset jack, and gyroscope function of the P5 original controller;
3. Provide 2 Mn keys to set the Remap function, with 14 keys (↑, ↓, ←, →, ╳, ○, □, △, L1, R1, L2, R2, L3, R3)

Operating Instructions

P5 Connection:
Turn on the PS5 console. When the controller is in sleep mode, use the Type C-USB cable to connect to the console to pairing. After successful pairing, press the PS button to connect wirelessly. Unplug the cable to control wirelessly.
PC Connection:
Use the Type C-USB cable to connect the controller and console to use (PC does not support vibration function).
Remap Function
Mn key = M1, M2 key (initial value: M1 defaults to ○ Button, M2 defaults to × Button) Remap keys can be set on: ↑, ↓, ←, →, △, ○, □, X, L1, R1, L2, R2, L3, R3
Setting:
Step 1:
Press and hold the Mn key, and then press the SHARE button. The indicator light turns red to enter the setting mode.
Step 2:
Press the button you want to set (Multiple buttons available), and then press the Mn key, which means the setting is completed and the setting mode is exited. The indicator light will return to its previous color.
For example: Press and hold the M1 button, then press the SHARE button, the indicator light turns red and enters the setting mode. Press R1, then press M1 again, the setting is completed and the setting mode is exited. The indicator light returns to the color before setting. At this time, M1 corresponds to the function of R1.
Clear the function of Mn key :
Press and hold the Mn key, then press the SHARE button, the indicator light turns red, press the Mn key again to save clearing the function (If you need to Remap, then set it up).
TURBO Function
a. Set the Manual TURBO Function: (the first time) press and hold （△/○/□/Ｘ /L1/R1/L2/R2）one or several buttons, then press the TURBO button to turn on the manual burst function;
b. Set the Automatic TURBO Function: (the second time) press the action button that has turned on the manual burst function again, and press the TURBO button again to turn on the automatic burst function;
c. Clear the TURBO Function:(the third time) Press and hold the set buttons, and then press the TURBO button to clear the TURBO function.
RGB Colorful Light
a. Different-color gradient mode: The lights on the left and right change colors randomly and gradually change, and the display on the left and right sides is different. (This mode is the default when the controller is turned on).
b. Single-color gradient mode: Red-Orange-Yellow-Green-Cyan-Blue-red repeated cycle changes.
c. Single-color constant mode: (red-orange-yellow-green-cyan-blue-red) single color cycle, press TURBO + OPT I ONS Button to switch to the next color.
d. After powering on, press TURBO + SHARE Button to switch to Single-color gradient mode, press TURBO + SHARE Button again to return to Single-color constant light mode, and cycle.
e. Hold TURBO and double-click SHARE to turn on and off the light. After turned off, the light does not have memory function.
Low Battery Prompt and Charging
Low battery prompt:
When the controller battery is low, the console will prompt low battery. At this time, the controller needs to be charged.
Charging:
When the controller is turned off, plug in the charging cable and connect it to a console or DC 5V power supply to charge. The orange indicator light flashes slowly during charging, and lights out when fully charged.
Shutdown and Auto-sleep
Shut down the controller:
Press and hold the PS button for 10 seconds.
Automatic Sleep:
The controller will automatically sleep when the console is in sleep mode.
Reset:
When the controller is abnormal, poke the Reset Button with a sharp object to reset.

Product Parameters

• Operating voltage: DC 3.5V-4.2V
• Operating current: 100mA±10mA
• Maximum current：＜300mA
• Sleep current: Less than 20uA
• Interface: Type-C
• Built-in battery: 1000mAh
• Input charging voltage: DC 5V
• Charging current: 400mA
• Bluetooth version: 4.0
• Transmission distance: 10M
• Built-in features: Asymmetric
• vibration motor, Touch, Stereo
• headset jack, Gyroscope function

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with exposure requirements.
This equipment should be installed and operated with minimum distance 0 mm between the radiator & your body.