Contents
hide
BTMA110BK Bluetooth Multi Adapter
User Manual
Preface
Thank you for purchasing the Nedis BTMA110BK.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Bluetooth Multi Adapter is a multifunctional FM streaming device that allows you to:
Play music from a Bluetooth device.
Safely answer phone calls while driving through a built-in microphone.
The Bluetooth Multi Adapter functions wirelessly with a built-in, rechargeable battery.
Intended use
The product is exclusively intended for playing music from a Bluetooth device and for answering and making hands-free phone calls.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Main parts (image A)
 |
|
A
|
|
1. AUX port
|
|
2. Next song / Volume up
|
|
3. Play / pause – Power on / off – Answer call / hang up
|
|
4. Previous song / Volume down
|
|
5. Status indicator LED
|
|
6. Microphone
|
|
7. Micro USB port
|
|
8. Double sided 3.5 mm plug
|
|
9. USB cable
|
Specifications
|
Product
|
Bluetooth Multi Adapter
|
|
Article number
|
BTMA110BK
|
|
Power supply
|
5 VDC / 2.0 A
|
|
Battery
|
Li-ion
|
|
Max. battery lifetime
|
4 hours
|
|
Max. battery charging time
|
2 hour
|
|
Wireless technology
|
Bluetooth® 4.2
|
|
Max. radio transmit power
|
3 dBm
|
|
Bluetooth frequency range
|
2402 – 2480 MHz
|
|
Bluetooth profiles
|
A2DP
AVRCP
HFP
|
|
AUX output/input
|
3.5 mm stereo jack
|
Safety instructions
WARNING
- Only use the product as described in this manual.
- Be careful when using the product while driving. Always focus your attention on the road.
- Do not expose the product to water or moisture.
- Do not expose the product to direct sunlight, naked flames or heat.
- Do not drop the product and avoid bumping.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
- Connect to an audio output (image B)
To connect the product to an FM radio:
 |
|
B
|
1. Connect one end of A8 to A1.
2. Connect the other end of A8 to the radio’s AUX port.
Alternatively:
- Connect earphones to A1.
- Pair a Bluetooth device
- To pair a mobile device to the product, do the following:
1. Press and hold A3 for 3 seconds to switch on the product.
- Voice feedback: “Pairing“
- A5 flashes red and blue.
2. Activate Bluetooth on your phone and connect with the product (BTMA110BK).
3. If asked, enter the pairing code ‘0000’.
- Voice feedback: “Connected“
- A5 flashes blue.
- The product can be paired to two Bluetooth devices simultaneously.
- When you switch the product on next time, it automatically connects to the last paired Bluetooth device.
- The product powers off automatically 5 minutes after being disconnected.
Use
Play music
The product can play music from the connected Bluetooth device:
1. Play music from the mobile device that is connected to the product via Bluetooth.
- Press A3 to play or pause music.
- Press A2 or A4 to control the volume.
- Press and hold A2 or A4 to switch between songs.
Answer phone calls
- When a call comes in while playing music, the product will automatically switch to telephone mode.
- When making a call, you must dial the number on your phone. Once the call connects, you can use the product’s hands-free function.
- Be careful when using the product while driving. Always focus your attention on the road.
- To answer an incoming call, press A3.
- To reject an incoming call, press and hold A3 for 3 seconds.
- During a call, press and hold A3 for 3 seconds to switch to private mode.
- To call the previous number, press A3 twice.
Charge the product (image C)
 |
|
C
|
- When battery power is low, A5 will blink.
- Voice feedback: “Low battery”
- To charge the product:
- Connect A9 to A7.
- Connect the other end of A9 to a power outlet.
- A5 lights up to indicate that the product is charging.
- A5 turns off when the product is fully charged.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
 |
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
|
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product BTMA110BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/btma110bk#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
