NEC Projector User Guide

NP-PX2000UL
NP-PX2000UL+
NP-PX2000ULJD

Quick Setup Guide

Step 1

Install the projector and mount the optional lens.

WARNING

Please be sure to consult your dealer as installation and attachment/detachment of the lens unit must be performed by professional service personnel.
Never try to install the projector by yourself. This may result in visual impairment etc.

Step 2

Connect your computer or audio-video equipment.

Step 3

Connect the supplied power cord and attach the power cord stopper.

Make sure that the prongs are fully inserted into both the AC IN terminal and the wall outlet.

Step 4

Remove the lens cap.

Step 5

Turn on the projector.

Step 6

Select a source.

Step 7

Adjust the image size and position.

• Press the ◀ or ▶ button to change the test pattern.
• Press the EXIT button to turn off the test pattern.

Step 8

Turn off the projector.

© NEC Display Solutions, Ltd. 2020 Printed in China Ver. 1 1/20 7N8R0261

1. Install the projector and mount the optional lens.
   WARNING
   Please be sure to consult your dealer as installation and attachment/detachment of the lens unit must be performed by professional service personnel.
   Never try to install the projector by yourself. This may result in visual impairment etc.
2. Connect your computer or audio-video equipment to the projector.
3. Connect the supplied power cord and attach the power cord stopper.
4. Remove the lens cap.
5. Turn on the projector.
   1. Press the main power switch to the ON position ( I ).
   2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.
6. Select a source.
7. Adjust image size and position.
   

   TEST PATTERN	• On the remote control, press the TEST button. • Press the ◀ or ▶ button to change the test pattern. • Press the EXIT button to turn off the test pattern.
   LENS SHIFT	• On the projector, press the SHIFT ▼▲◀ or ▶ button. • On the remote control, while pressing on the CTL button, press the ECO/L-SHIFT button. And press the ▼▲◀ or ▶ button.
   FOCUS	• On the projector, press the FOCUS (+) or (−) button. • On the remote control, while pressing on the CTL button, press the VOL/FOCUS (+) or (−) button.
   ZOOM	• On the projector, press the ZOOM (+) or (−) button. • On the remote control, while pressing on the CTL button, press the D-ZOOM/ ZOOM (+) or (−) button.

8. Turn off the projector.
   1. Press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control.
   2. Press either the (POWER) or the POWER OFF button again.
   3. Make sure the projector is in STANDBY MODE, then press the main power switch to the OFF position (○).