IDEC FC6A-J8A1 ८pt भोल्युमtage हालको इनपुट मोड प्रयोगकर्ता गाइड

IDEC FC6A is a multifunctional PLC equipped with powerful IoT capabilities, all within compact hardware.
It supports the MQTT protocol, allowing the PLC to connect to MQTT brokers and cloud services. Additionally, it features a dedicated user interface for connecting to AWS IoT Core, enabling PLC programmers to easily establish communication between the PLC and AWS IoT Core.
यो गाइडले IDEC FC6A Plus PLC लाई AWS IoT Core मा कसरी जडान गर्ने भनेर व्याख्या गर्दछ।

हार्डवेयर विवरण

Datasheet/Brochure
https://us.idec.com/idec-us/en/USD/Programmable-Logic-Controller/Micro-PLC/FC6A-MicroSmart-PLC/c/MicroSmart_FC6A?page=1

प्रयोगकर्ता-प्रदान वस्तुहरू
The package for the FC6A Plus CPU unit includes only the CPU unit and the I/O terminal block. Please note that you will need to provide a USB cable (USB-A to USB Mini-B) and a 24V power supply separately.

तेस्रो पक्ष किन्न योग्य वस्तुहरू
कुनै पनि छैन

आफ्नो विकास वातावरण सेट अप गर्नुहोस्

उपकरण स्थापना (IDEs, Toolchains, SDKs)
PLC अनुप्रयोग प्रोग्राम गर्न WindLDR सफ्टवेयर आवश्यक पर्दछ। IDEC ले स्वचालन आयोजक सुइट प्रदान गर्दछ, जसमा WindLDR सफ्टवेयर समावेश छ। स्वचालन आयोजक खरिदको लागि भाग नम्बर SW1A-W1C हो। कृपया IDEC वितरक वा अधिकृत अनलाइन खुद्रा विक्रेतासँग जाँच गर्नुहोस्।
https://us.idec.com/idec-us/en/USD/Software/Automation-Organizer/p/SW1A-W1C

Set Up Device Hardware

<Power Supply>
The IDEC FC6A Plus requires a 24V DC power supply. Connect the 24V power supply unit to the connector on the FC6A.
<Internet Connection>
The FC6A Plus has two Ethernet ports. Port 1 is located on the upper side, and Port 2 is on the lower side of the unit. To connect to AWS IoT Core, use Port 1 (upper side).

Set up your AWS account and permissions

If you do not have an existing AWS account and user, refer to the online AWS documentation titled “Set Up Your AWS Account.” To get started, follow the steps outlined in the sections below:

AWS खाताको लागि साइन अप गर्नुहोस्
प्रशासनिक प्रयोगकर्ता सिर्जना गर्नुहोस्
Open the AWS IoT Console

AWS IoT संसाधनहरू सिर्जना गर्नुहोस्

Refer to the online AWS documentation at Create AWS IoT Resources. Follow the steps outlined in the sections below to provision resources for your device:

Create an AWS IoT policy
Create a Thing object

प्रमाणहरू सहित उपकरण प्रावधान

Refer to pages 12 and 18 in the following document.
These sections explain how to download the Root (Server) CA, the certificate file FC6A र निजी कुञ्जीको लागि file, साथै तिनीहरूलाई FC6A मा कसरी आयात गर्ने।

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTTAWSIoTCoreTraining.pdfcontext=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

Build the Demo

Refer to pages 1 to 22 in the following document. These pages explain how to connect the FC6A to AWS IoT Core. Follow the step-by-step tutorial to complete the connection process.

https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

डेमो चलाउनुहोस्
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.

AWS IoT Core मा सन्देशहरू प्रमाणित गर्नुहोस्

Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

समस्या निवारण

Refer to page 33 in the following document, which details the MQTT connection error codes.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw

थप जानकारीको लागि, कृपया AWS IoT समस्या निवारणमा AWS अनलाइन कागजात हेर्नुहोस्।

बारम्बार सोधिने प्रश्नहरू

What is the power supply requirement for IDEC FC6APlus?

The IDEC FC6A Plus requires a 24V DC power supply.

Where can I find the necessary software for programming the PLC application?

You can install WindLDR software from the Automation Organizer suite, available for purchase with part number SW1A-W1C.

Which Ethernet port should be used for connecting to AWS IoT Core?

Port 1 (upper side) of the FC6A Plus should be used for connecting to AWS IoT Core.

कागजातहरू / स्रोतहरू

IDEC FC6A-J8A1 ८pt भोल्युमtage वर्तमान इनपुट मोड [pdf] प्रयोगकर्ता गाइड
FC6A-J8A1 ८pt भोल्युमtage वर्तमान इनपुट मोड, FC6A-J8A1, 8pt भोल्युमtage वर्तमान इनपुट मोड, भोल्युमtage वर्तमान इनपुट मोड, वर्तमान इनपुट मोड, इनपुट मोड, मोड

सन्दर्भहरू

प्रयोगकर्ता पुस्तिका

IDEC FC6A-J8A1 ८pt भोल्युमtage वर्तमान इनपुट मोड

माथिview