VEVOR #8-300LB/h Commercial Electric Meat Grinder Instruction Manual

परिचय

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your VEVOR #8-300LB/h Commercial Electric Meat Grinder. Please read these instructions thoroughly before initial use and retain for future reference.

सुरक्षा निर्देशनहरू

• एसेम्बली, डिसेम्बली, वा सफा गर्नु अघि सधैं उपकरण अनप्लग गरिएको सुनिश्चित गर्नुहोस्।
• Keep hands and utensils out of the feeding tube and grinding head during operation. Use the provided meat pusher only.
• भिजेको हातले वा भिजेको अवस्थामा ग्राइन्डर नचलाउनुहोस्।
• Ensure all parts are correctly assembled and secured before turning on the appliance.
• Do not overload the motor. If the motor stalls, use the reverse function or turn off the appliance and clear the obstruction.
• उपकरण बालबालिकाको पहुँचबाट टाढा राख्नुहोस्।
• Do not immerse the main motor body in water or any other liquid.
• क्षतिको लागि नियमित रूपमा पावर कर्ड निरीक्षण गर्नुहोस्। यदि कर्ड बिग्रिएको छ भने सञ्चालन नगर्नुहोस्।

प्याकेज सामग्री

अनप्याक गर्दा सबै कम्पोनेन्टहरू उपस्थित छन् र राम्रो अवस्थामा छन् भनी प्रमाणित गर्नुहोस्:

• मुख्य मोटर एकाई
• Meat Grinder Head (Stainless Steel)
• Meat Tray (Stainless Steel)
• Auger (1 pre-installed)
• Cross Blades (2 total: 1 pre-installed, 1 extra)
• Grinding Plates (2 total: 1 pre-installed 6.0 mm, 1 extra 8.0 mm)
• मासु पुशर
• Sausage Stuffing Kit (includes various tubes)
• प्रयोगकर्ता पुस्तिका

Figure 1: Complete Accessory Set

सेटअप

1. Place the main motor unit on a stable, flat, and dry surface. Ensure the suction cups on the base are securely attached to prevent movement during operation.
2. Insert the meat grinder head into the motor unit's front opening. Align the head with the locking mechanism and twist clockwise until it locks into place. You may need to press the release button to fully secure it.
3. ग्राइन्डर हेडमा औगर घुसाउनुहोस्।
4. Place a cross blade onto the auger shaft, ensuring the sharp edges face outwards towards the grinding plate.
5. Select the desired grinding plate (6.0 mm for fine, 8.0 mm for coarse) and place it over the cross blade, aligning the notches.
6. Screw the locking ring onto the front of the grinder head until it is hand-tight. Do not overtighten.
7. Place the stainless steel meat tray onto the top of the grinder head.
8. Ensure the power cord is neatly stored and plugged into a grounded electrical outlet.

सञ्चालन निर्देशनहरू

मासु पीस्दै

1. Prepare meat by cutting it into strips or cubes that fit easily into the feeding tube. For best results, partially freeze the meat for about 30-60 minutes before grinding. This helps maintain meat temperature and prevents smearing.
2. पिसेको मासु सङ्कलन गर्न पिस्ने टाउको मुनि एउटा कचौरा वा भाँडो राख्नुहोस्।
3. Turn on the grinder using the ON/OFF switch.
4. Feed the meat into the feeding tube using the meat pusher. Never use your fingers or other utensils.
5. If the grinder becomes jammed, press the 'REV' (Reverse) button to clear the obstruction. Once cleared, switch back to ON.
6. Continue feeding meat until all is ground.

Figure 2: Effortless Meat Grinding

ससेज भर्ने

1. Disassemble the grinding plate and cross blade. Attach the appropriate sausage stuffing tube to the grinder head and secure it with the locking ring.
2. आफ्नो सिजन गरिएको पिसेको मासुको मिश्रण तयार गर्नुहोस्।
3. c स्लाइड गर्नुहोस्asing onto the stuffing tube, leaving a small overhang at the end.
4. Turn on the grinder and feed the meat mixture into the feeding tube. Guide the casing भरिँदै जाँदा, समान वितरण सुनिश्चित गर्दै र हावाका पकेटहरूबाट बच्न।

Figure 3: Grind & Stuff 2-in-1 Mode

मर्मत र सफाई

Proper cleaning ensures the longevity and hygiene of your meat grinder.

1. पावर आउटलेटबाट उपकरण अनप्लग गर्नुहोस्।
2. Disassemble the grinder head by twisting the locking ring counter-clockwise, removing the grinding plate, cross blade, and auger. Press the release button to detach the entire grinder head from the motor unit.
3. Wash all detachable parts (grinder head, meat tray, auger, blades, plates, sausage tubes) with warm, soapy water. These parts are dishwasher-safe.
4. Wipe the main motor body with a damp कपडा। यसलाई पानीमा डुबाउनु हुँदैन।
5. Ensure all parts are thoroughly dried before reassembly or storage to prevent rust.

Figure 4: Washable and Rust-Resistant Parts

Figure 5: Disassembly Steps for Cleaning

समस्या निवारण

निर्दिष्टीकरणहरू

चित्र ३.१: उत्पादन आयाम र विशिष्टताहरू

वारेन्टी र समर्थन

VEVOR provides technical support and warranty information for its products. For detailed warranty terms and conditions, or to access technical support, please visit the official VEVOR webसाइट वा आफ्नो ग्राहक सेवा सम्पर्क गर्नुहोस्।

Protection plans are available for purchase separately to extend coverage beyond the standard warranty period. Options include 3-Year, 4-Year, and Complete Protect plans.

निर्माता: VEVOR