Fluval AC110 Power Filter User Manual

परिचय

The Fluval AC110 Power Filter is an external hang-on-back filtration system designed to provide superior 4-stage filtration for aquariums ranging from 60 to 110 US gallons (227-416 liters). This filter ensures crystal-clear and healthy water conditions through mechanical, chemical, and biological filtration processes. This manual provides detailed instructions for the proper setup, operation, and maintenance of your Fluval AC110 Power Filter.

सुरक्षा निर्देशनहरू

• Always disconnect all electrical appliances from the mains power supply before placing hands in the aquarium, performing maintenance, or handling the filter.
• Ensure the filter is securely mounted to the aquarium rim and filled with water before connecting to power.
• Do not operate the filter if any part is damaged or if the power cord is frayed.
• यो उपकरण भित्री प्रयोगको लागि मात्र हो।
• बालबालिकाको पहुँचबाट टाढा राख्नुहोस्।

प्याकेज सामग्री

सबै कम्पोनेन्टहरू सावधानीपूर्वक अनप्याक गर्नुहोस् र निम्न वस्तुहरू उपस्थित छन् भनी सुनिश्चित गर्नुहोस्:

• Fluval AC110 Power Filter Unit
• पूर्व-फिल्टर स्पन्ज
• BioFoam Insert
• BioMax Insert (biological media)
• Carbon Insert (chemical media)
• Intake Tube Assembly
• Output Spout

छवि: विस्फोट भयो view of the Fluval AC110 Power Filter showing all included parts for assembly.

सेटअप निर्देशनहरू

1. अनप्याक र निरीक्षण गर्नुहोस्: Remove all packaging materials and inspect the filter and its components for any damage.
2. एसेम्बल इनटेक ट्यूब: Connect the intake tube sections and attach the pre-filter sponge to the bottom of the intake tube.
3. Install Filter Media: Place the filter media into the filter basket in the following order from bottom to top: BioFoam, Carbon Insert, BioMax Insert. Ensure they are seated correctly.
4. Mount Filter: Hang the filter unit securely on the back rim of your aquarium. Ensure it is level and stable.
5. Position Intake Tube: Insert the assembled intake tube into the filter unit and adjust its length so the pre-filter sponge is submerged in the aquarium water, ideally near the bottom.
6. पानी भर्नुहोस्: Manually fill the filter reservoir with aquarium water until it is full. This primes the pump and prevents dry running.
7. पावर जोड्नुहोस्: Once the filter is filled with water and securely mounted, plug the power cord into a grounded electrical outlet. The filter should start operating immediately.

Image: The Fluval AC110 Power Filter fully assembled, showing the intake tube and media basket.

छवि: एक कटअवे view of the Fluval AC110 filter, illustrating the four stages of filtration media: (1) pre-filter sponge, (2) BioFoam, (3) carbon insert, and (4) BioMax biological media.

सञ्चालन निर्देशनहरू

Once properly set up and plugged in, the Fluval AC110 Power Filter will begin circulating and filtering your aquarium water. The filter is designed for continuous operation to maintain water quality.

प्रवाह नियन्त्रण

The Fluval AC110 features an adjustable flow control knob, typically located on the top of the filter unit. This allows you to regulate the water flow rate to suit the needs of your aquarium inhabitants. Turn the knob clockwise to decrease flow and counter-clockwise to increase flow.

Re-priming After Power Outage

शक्तिको स्थितिमा outage, the filter may lose its prime. Once power is restored, if the filter does not restart automatically or if the water flow is weak, unplug the unit, manually fill the filter reservoir with aquarium water, and then plug it back in. This will re-prime the pump.

मर्मतसम्भार

Regular maintenance is crucial for the optimal performance and longevity of your Fluval AC110 Power Filter and the health of your aquarium.

साप्ताहिक मर्मतसम्भार

• प्रवाह दर जाँच गर्नुहोस्: Ensure the water flow is consistent and strong. A reduced flow rate may indicate clogged media.
• Clean Pre-filter Sponge: Gently rinse the pre-filter sponge in old aquarium water (removed during a water change) to remove trapped debris. Do not use tap water as chlorine can harm beneficial bacteria.

मासिक मर्मतसम्भार

• Rinse BioFoam: Lightly rinse the BioFoam insert in old aquarium water. Avoid excessive cleaning to preserve beneficial bacteria.
• Replace Carbon Insert: The carbon insert should be replaced every 2-4 weeks, or as needed, to maintain chemical filtration effectiveness.
• सफा इम्पेलर: Unplug the filter and carefully remove the motor unit and impeller. Clean the impeller and its housing with a small brush to remove any debris or mineral buildup.

हरेक ६-१२ महिनामा

• Rinse BioMax: Gently rinse the BioMax biological media in old aquarium water. Only clean if visibly clogged, as it houses essential beneficial bacteria.

Image: A detailed internal view of the Fluval AC110 Power Filter, highlighting the motor and impeller assembly, which should be cleaned regularly.

समस्या निवारण

निर्दिष्टीकरणहरू

• मोडेल: Fluval AC110 (Model Number: 19620)
• एक्वैरियम क्षमता: 60-110 US Gallons / 227-416 Liters
• पम्प आउटपुट: 500 US GPH (Gallons Per Hour)
• निस्पंदन एसtages: ३-सेकेन्डtage (यान्त्रिक, रासायनिक, जैविक)
• वस्तु वजन: २.२ पाउण्ड (१ किलोग्राम)
• उत्पादन आयाम (LxWxH): २.३ x २.१७ x २.३६ इन्च (५.८ x ५.५ x ६ सेमी)
• निर्माता: Rolf C. Hagen (USA) कर्पोरेशन
• समावेश अवयवहरू: Power Filter, pre-filter sponge, biofoam insert, biomax insert, carbon insert

Image: Diagram showing the key dimensions of the Fluval AC110 Power Filter for proper placement and fit.

वारेन्टी र समर्थन

For warranty information or technical support, please refer to the documentation included with your product packaging or visit the official Fluval webसाइट। वारेन्टी दावीहरूको लागि आफ्नो खरिदको प्रमाण राख्नुहोस्।

निर्माता: Rolf C. Hagen (USA) कर्पोरेशन