Philips 12361B1 H9 Standard Halogen Headlight Bulb Instruction Manual

परिचय

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips 12361B1 H9 Standard Halogen Headlight Bulb. Philips Standard range bulbs are designed to offer Original Equipment quality, ensuring reliable performance for your vehicle's lighting system.

सुरक्षा जानकारी

• सुरक्षात्मक गियर लगाउनुहोस्: Always wear appropriate eye protection and gloves when handling automotive bulbs.
• सिसा छुनुबाट बच्नुहोस्: Never touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use gloves or a clean cloth/paper towel if contact is unavoidable.
• विद्युतीय सुरक्षा: Ensure the vehicle's ignition is off and the headlights are switched off before attempting any bulb replacement. Disconnect the battery if necessary to prevent electrical shock.
• उचित निपटान: स्थानीय नियम अनुसार पुराना बल्बहरू नष्ट गर्नुहोस्।
• प्रस्ताव ६५ चेतावनी: यो उत्पादनले तपाईंलाई क्यालिफोर्निया राज्यलाई थाहा भएको रसायनहरूको सम्पर्कमा ल्याउन सक्छ जसले क्यान्सर र जन्म दोष वा अन्य प्रजनन हानि निम्त्याउन सक्छ। थप जानकारीको लागि, भ्रमण गर्नुहोस् www.P65Warnings.ca.gov.

प्याकेज सामग्री

• 1 x Philips 12361B1 H9 Standard Halogen Headlight Bulb

निर्दिष्टीकरणहरू

सेटअप र स्थापना

Replacing a headlight bulb can vary depending on your vehicle's make and model. Always consult your vehicle's owner's manual for specific instructions and safety precautions before proceeding. The following steps provide a general guide.

सिफारिस गरिएका उपकरण र सामग्रीहरू:

• New Philips H9 Halogen Headlight Bulbs (recommended to replace in pairs)
• Protective gloves (latex or nitrile)
• सफा कपडा वा कागज तौलिया
• Screwdriver or wrench (if required by your vehicle)

चरण-दर-चरण स्थापना:

1. आफ्नो गाडी तयार पार्नुहोस्: Park your vehicle on a level surface, turn off the engine, engage the parking brake, and turn off all lights. Allow the engine to cool down if it has been recently running.
2. हेडलाइट असेंबली पत्ता लगाउनुहोस्: Open the hood of your vehicle. Identify the back of the headlight assembly. Access may require removing other components like air intake ducts or battery covers, depending on your vehicle model.
3. विद्युतीय कनेक्टर विच्छेद गर्नुहोस्: Carefully disconnect the electrical connector from the back of the old bulb. This usually involves pressing a tab and pulling.
4. पुरानो बल्ब हटाउनुहोस्: The bulb is typically held in place by a retaining clip or a twist-lock mechanism. Release the clip or twist the bulb counter-clockwise to remove it from the housing.
5. Inspect the Old Bulb: Note the orientation of the old bulb to ensure the new one is installed correctly.
6. नयाँ बल्ब स्थापना गर्नुहोस्:
   

   छवि: क्लोज-अप view of the Philips H9 Halogen Headlight Bulb, showing the glass capsule and base connector.
   

   छवि: विस्तृत view of the Philips H9 Halogen Headlight Bulb's base, highlighting the electrical contacts and mounting flange.

   Holding the new Philips H9 bulb by its plastic base (wearing gloves), carefully insert it into the headlight housing. Align the tabs on the bulb with the slots in the housing. Twist clockwise or re-engage the retaining clip until the bulb is securely seated.

7. विद्युतीय कनेक्टर पुन: जडान गर्नुहोस्: Plug the electrical connector back onto the new bulb until it clicks into place.
8. बत्ती परीक्षण गर्नुहोस्: Turn on your vehicle's headlights to ensure both the newly installed bulb and the other headlight (if replaced in pairs) are functioning correctly. Check both low and high beams.
9. Adjust Headlight Aim (if necessary): If your headlights appear misaligned after replacement, consult your vehicle's owner's manual or a qualified technician for proper aiming procedures.

महत्त्वपूर्ण: It is highly recommended to replace headlight bulbs in pairs. As bulbs age, their light output diminishes. Replacing both at the same time ensures a symmetric light beam and consistent visibility on the road, enhancing safety.

Operating Your Headlights

Your Philips H9 Halogen Headlight Bulbs are designed for standard vehicle operation. Use your vehicle's headlight switch to control low beams, high beams, and parking lights as appropriate for driving conditions. Always use low beams when driving in traffic or when approaching other vehicles to avoid dazzling other drivers.

Image: A car driving at night, illuminated by bright, clear headlights, demonstrating enhanced visibility.

मर्मतसम्भार

• नियमित निरीक्षण: Periodically check your headlights for proper function. Ensure both low and high beams are working and that the light output is consistent.
• Clean Headlight Lenses: Keep your vehicle's headlight lenses clean from dirt, grime, and haze. Use a soft cloth and automotive-approved cleaner to maintain optimal light transmission.
• जोडीहरूमा बदल्नुहोस्: As mentioned in the installation section, it is best practice to replace both headlight bulbs at the same time to ensure balanced light output and prevent one side from being dimmer than the other.
• प्रदूषणबाट बच्नुहोस्: When handling bulbs for inspection or replacement, always use gloves to prevent skin oils from transferring to the glass.

समस्या निवारण

बल्ब बल्दैन:

• जडान जाँच गर्नुहोस्: विद्युतीय कनेक्टर बल्बमा सुरक्षित रूपमा जोडिएको छ भनी सुनिश्चित गर्नुहोस्।
• सिट प्रमाणित गर्नुहोस्: Make sure the bulb is properly seated and twisted/clipped into the headlight housing.
• फ्यूज निरीक्षण गर्नुहोस्: Check your vehicle's fuse box for a blown headlight fuse. Consult your vehicle's owner's manual for fuse box location and diagram.
• अर्को बल्बको साथ परीक्षण गर्नुहोस्: If possible, test the circuit with a known working bulb to rule out a vehicle wiring issue.

मधुरो वा असमान प्रकाश आउटपुट:

• जोडीहरूमा बदल्नुहोस्: If only one bulb was replaced, the new bulb might appear brighter than the older, still-functioning bulb. Replace both for balanced light.
• सफा लेन्सहरू: Ensure headlight lenses are clean and free of haze or oxidation.
• Check Aim: Headlights may need to be re-aimed after bulb replacement.

Incorrect Bulb Fit:

फिट पुष्टि गर्नुहोस्: When selecting a replacement bulb, always confirm the specific POSITION (e.g., fog light, low beam, high beam) and any नोटहरू provided by the manufacturer or an automotive parts finder. For some vehicles, a bulb type might fit certain positions but not all. The POSITION and NOTES ensure an exact fit for your vehicle.

वारेन्टी र समर्थन

For warranty information, technical support, or further assistance with your Philips 12361B1 H9 Standard Halogen Headlight Bulb, please visit the official Philips Automotive Lighting webसाइटमा जानुहोस् वा उनीहरूको ग्राहक सेवामा सम्पर्क गर्नुहोस्। खरिदको प्रमाणको रूपमा आफ्नो खरिद रसिद राख्नुहोस्।

Official Philips Automotive Webसाइट: www.philips.com/automotive