NCP D2114-10 Rectangle Dining Table
Specifications:
- Product Model: D2114-10 MARIANA RECTANGLE DINING TABLE
- Material: Wood
- Color: Brown
- Origin: Made in Vietnam
Assembly Instructions
D2114-10 MARIANA RECTANGLE DINING TABLE
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items and compare with the PARTS LIST and/or HARDWARE LIST shown below.
Caution: Please read the instructions thoroughly before assembly.
- We recommend that you assemble this product with the assistance of another person; this will make the assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
- Please do not over tighten screws or bolts until the assembly is completed.
- Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased product correctly and efficently.
PARTS LIST
| NO: | COMPONENT | SKETCH | Q’TY |
| A | Table Top |  |
1 PC |
| B | Leaf |  |
1 PC |
| C | Leg |  |
4 PCS |
HARDWARE LIST
| NO: | COMPONENT | SKETCH | Q’TY |
| 1 | Allen Key |  |
1 PC |
| 2 | Bolt 5/16″*2-1/4″L |  |
8 PCS |
| 3 | Lock Washer 5/16″ |  |
8 PCS |
| 4 | Flat Washer 5/16″ |  |
8 PCS |
STEP 1
- Place the table top (A) upside down on a soft and clean surface.
- Assemble the legs (C) with the table top (A) by using Allen Key (1) with hardware 2,3, and 4.
- Attention: DO NOT TIGHTEN THE BOLTS.
STEP 2
To level the table, stand the table up on a flat surface and tighten all the bolts by using Allen Key (1).
MADE IN VIETNAM
FAQs
Q: What should I do if I find missing parts?
A: If you find any missing parts, please contact customer support for assistance. Ensure to have your purchase receipt ready for verification.
Q: Can the table be disassembled for storage or transportation?
A: Yes, you can disassemble the table by following the assembly instructions in reverse order. Store and transport the parts carefully to avoid damage.
Documents / Resources
 |
NCP D2114-10 Rectangle Dining Table [pdf] Installation Guide D2114-10 Rectangle Dining Table, D2114-10, Rectangle Dining Table, Dining Table, Table |