M2
Flatpack Assembly Manual
M2 Grater Version
| 11 Glass Window Panel 12 Slotted Window Panel 13 Front l0 Cover – Round 14 Front l0 Cover – Angle 15 Tall Feet 16 Power Supply Bracket – ATX 17 VGPU Kit (lnclude PCle Riser Cable + Bracket) |
1 Parts 2 Front Panel 3 Rear Panel 4 Motherboard Tray 5 Fan + Radiator Bracket 6 Side Panels x2 7 Top Panel 8 Bottom Panel 9 Power Supply Bracket – SFX 10 Power Supply Inlet Cable |
DO NOT overtighten screws. Once resistance is encountered, do not tighten more than one-quarter turn.
Each fastener is different in length or head-shape, and putting them next to each other is a good way to identify them.
Screw-5 
M3 Flat Sunk Screw
This screw works for all of the steps in this manual. One-screw-fits-all is easier to build.
This screw is custom designed to work with both regular and countersunk holes.
OR
CScrew-6
M3 Countersunk Screw
This screw only works for countersunk holes,and has a slightly stronger lock.
| CScrew-4 M3 Countersunk Screw |
 |
| PSbracket-10 M3 PowerSupplyBracket Screw |
 |
| Standoff-6 M3 FemaleStandoff Screw |
 |
| Thumbscrew-10 M3 Thumb Screw |
 |
M2
Flipped Configuration
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Classic Configuration
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
VGPU Configuration
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
M2
Flatpack Assembly Manual
Documents / Resources
 | M2 Grater Version |
References
- User Manualmanual.tools
Published: August 30, 2024
Updated: September 2, 2024