NBE 901662 Conversion Kit User Guide

NBE 901662 Conversion Kit

Description

• This kit does not have a California E.O. # (exemption order)
• In the state of California this kit can be installed on 1975 or earlier vehicles only 

For converting an I6, V6 or V8 engine from carburetor to throttle body fuel injection. Uses remanufactured GM throttle body appropriate for engine size. Operates GM engines with or without ECM controlled ignition. Very popular for older street-driven vehicles or 4 wheel drive vehicles. Contains all sensors, components, wiring harnesses, ECM and fuel pump to install fuel injection on your engine. Custom calibration PROM for your engine. ECM installs under the dash. The fuel pump installs in the main fuel line, and bypass fuel is returned to the tank. Harness includes diagnostic connector, and diagnostic is similar to 1986-92 GM pickup.

Product Specifications

• Product Name: Ombygningskit, V13 til V16 Conversion Kit
• SKU: 901662
• Manufacturer: NBE PRODUCTION A/S
• Address: Kjeldgaardsvej 2

Product Usage Instructions

Installation Steps

1. Begin by unpacking all components from the conversion kit.
2. Refer to the provided user manual for detailed installation instructions.
3. Identify the parts to be replaced from the V13 system to upgrade to V16.
4. Carefully remove the old components and replace them with the new V16 components.
5. Ensure all connections are secure and follow the specified guidelines for assembly.

Maintenance Tips

• Regularly check for wear and tear on the converted parts.
• Clean the components as per the maintenance schedule provided by the manufacturer.
• Keep the conversion kit components away from moisture and extreme temperatures.

Safety Precautions

• Always disconnect power before starting the conversion process.
• Use appropriate safety gear like gloves and goggles during installation.
• If unsure about any step, consult a professional for assistance.

Frequently Asked Questions

Q: Can I use this conversion kit for other models?
A: This conversion kit is specifically designed for upgrading from V13 to V16 and may not be compatible with other models. Please check with the manufacturer for compatibility information.

Q: How long does it take to complete the conversion process?
A: The time taken for conversion may vary based on individual skill level, but typically it can be completed within a few hours.