0825CRR Create Ergonomic Detachable Wireless Mechanical Keyboard
“
Specifications
- Power: USB-C
- Connectivity: Pogo pins
- Keybindings: Customizable
Product Information
Naya Create is a modular keyboard system that allows for tenting
and docking of modules for enhanced functionality.
Handling
Do not force the hinges beyond their normal range of motion to
prevent damage.
Product Usage Instructions
Tenting
- Turn off Naya Create by disconnecting the USB-C cable and
ensuring power switches are off. - Lift Naya Create with one hand and grasp the main body.
- Grasp the wing hinge with the other hand, placing thumb over
the middle two wing keys and fingers on the bottom. - Bend the wing hinge by applying steady pressure upwards towards
the keycaps until reaching the desired angle. - Support the bottom of the dock with remaining fingers while
adjusting the wing angle.
Docking & Removing Modules
Docking Modules
- Align module pogo pins with Naya Create keyboard.
- Insert the module gently to allow magnets to attract and hold
it in place. - Ensure proper seating for full functionality and data pin
connection. - Avoid bridging pogo-pins while docking or undocking
modules.
Removing Modules
- Hold Naya Create aloft or tented on a flat surface for
stability. - Grasp the module from the top and press gently upwards to
undock it. - The module will separate from the magnetic link with the module
dock. - Refer to user manual for specific undocking guidance for
individual modules.
Maintenance & Care
- Turn off Naya Create by disconnecting USB-C cable and ensuring
power switches are off. - Remove dust and debris using a dry microfiber cloth, avoiding
liquid cleansers. - Avoid cleaning pogo pin connections with liquids, chemicals, or
physical abrasion.
Storing Naya Create
Naya Create can be stored in a travel case with modules
attached. Turn off both halves to prevent accidental keypresses and
use spacers for stability.
FAQ
Q: Can I use liquid cleansers on Naya Create?
A: No, do not use liquid cleansers to clean Naya Create as it
may damage the product.
Q: How should I store Naya Create?
A: Store Naya Create in a travel case with modules attached
after turning off both halves and using spacers for stability.
“`
2
Tenting
2V Turn off Create – Disconnect the USB-C cable and module and ensure that the
power switches are in the OFF positionV
V Lift Create – With one hand, pick up the keyboard and firmly grasp the main bodyV
V Grasp wing hinge – With the other hand place your thumb over the middle two
wing keys and grasp firmly with your remaining fingers on the bottom.A
3
V Bend wing hinge – Apply steady pressure upwards (towards the keycaps) until the
wing reaches the desired angleV
ÈV Grasp dock hinge – Grasp the dock by pressing your thumb onto the metal body
(avoid pressing on connection pins), supporting the bottom of the dock with your
remaining fingers.A
ÇV Bend dock hinge – Apply downward force to the module dock, until it reaches the
desired angleV
ÆV Repeat for both halves – Repeat this process for the other half of Create.
1
4
5 7
6
Whats in The Box?
Product Information
Power
Do not attempt to force the hinges of Naya Create beyond their normal range of motion!
Connectivity
Handling
Keybindings
Additional Information
Docking & Removing Modules
Docking Modules
id Align module – To dock a Naya module with your Naya Create keyboard, align the pogo pins of the module and keyboardd
Wd Insert the module – Gently insert the module. The magnets in the dock and on the bottom of the module will attract and hold it in placed
5d Ensure proper seating – Make sure the module is seated completely flat. This ensures a proper connection with the data pins for full functionality.
Be careful to not bridge pogo-pins while docking or undocking modules!
Removing Modules
id Hold Create – Hold the keyboard aloft, or rest it tented on a flat surface for stabilityd
Wd Grasp the module – Grasp the top of the module, placing one or more fingers underneath the module through the module dock cutout, and gently press upwardd
5d Undock the module – The module will separate from the magnetic link with the module dock.
pd Refer to User Manual – For specific undocking guidance for individual modules, please refer to the user manual for that module.
Whats in The Box?
Product Information
Power
Connectivity
Handling
Keybindings
Additional Information
Maintenance & Care
2F Turn off Create – Disconnect the USB-C cable and ensure that the power switches are in the off positionF
F Remove dust and debris – Take a dry microfiber cloth and gently wipe the surface of the keyboard. Start by wiping the keycaps in a circular motion to remove dust and dirt.
Do not use liquid cleansers to clean Create!
Do not clean pogo pin connections with liquids, chemicals or physical abrasion as you risk permanently damaging the connection.
Storing Naya Create
Naya Create can be stored in your travel case with modules attached. Make sure to} j Turn off both halves of your Naya Create to prevent accidental keypresses and preserve batteryF j Use the provided spacers to pack empty space and prevent shifting while stored.
Whats in The Box?
Product Information
Power
Connectivity
Handling
Keybindings
Additional Information
Documents / Resources
 |
Naya 0825CRR Create Ergonomic Detachable Wireless Mechanical Keyboard [pdf] Instruction Manual 0825CRR, 0825CRR Create Ergonomic Detachable Wireless Mechanical Keyboard, Create Ergonomic Detachable Wireless Mechanical Keyboard, Ergonomic Detachable Wireless Mechanical Keyboard, Detachable Wireless Mechanical Keyboard, Wireless Mechanical Keyboard, Mechanical Keyboard |