Product Information
The product is a NavTool Interface device that allows for multiple camera inputs and audio outputs to be connected to a car radio system. The device comes with a supplied harness, box, and cables for easy installation.
- Switch 1 and Switch 2 can be set to ON or OFF position depending on the desired usage.
- The device has four video inputs, including Rear Camera Input/ Video Input 1, Front Camera Input/ Video Input 2, Left Camera Input/ Video Input 3, and Right Camera Input/ Video Input 4.
- The device has two audio outputs, including Right Audio Output and Left Audio Output.
- The device also has an AUX Input that depends on the type of jack installed in the car from the factory.
- The device comes with a supplied microphone for audio input.
Product Usage Instructions
- Locate Switch 1 and Switch 2 on the NavTool Interface device.
- Set Switch 1 and Switch 2 to the desired ON or OFF position depending on the intended usage.
- If both switches are up, then the device is in OFF position.
- If both switches are down, then the device is in ON position.
- Connect the NavTool Interface device to the car radio system using the supplied harness, box, and cables.
- Connect the NavTool Supplied Harness to the NavTool Interface device.
- Connect the Rear Camera Input/ Video Input 1 and Front Camera Input/ Video Input 2 to the back of the car radio using the NavTool Supplied LVDS Cable or the Factory LVDS Cable.
- Connect the Left Camera Input/ Video Input 3 and Right Camera Input/ Video Input 4 to the back of the car radio using the Factory Wire and NavTool Supplied Cable.
- Connect the Right Audio Output and Left Audio Output to the back of the car radio using the NavTool Supplied Cable.
- Connect the AUX Input to the car radio system depending on the type of jack installed in the car from the factory using the NavTool Supplied Cable.
- Connect the NavTool Supplied Microphone to the NavTool Interface device for audio input.
- Enjoy using the NavTool Interface device to enhance your car radio experience with multiple camera inputs and audio outputs.
Quick Connection
Documents / Resources
![]() |
NAVTOOL NTV-KITxxx Navigation Video Interface [pdf] User Guide NTV-KITxxx Navigation Video Interface, NTV-KITxxx, Navigation Video Interface, Video Interface, Interface |