Navkom CU-201-2 Fingerprint Reader

Product Specifications:

• Model Numbers: CU-201/2, CU-202/2, CU-103/2
• Input Voltage: +12/24 V
• Compatible with: G-U, WINKHAUS, MACO, FUHR, KFV, ROTO ENEO
• Maximum LED Strip Length: 400 cm

Product Usage Instructions:

Resetting to Factory Settings:
Before the first use, reset the device by pressing and holding the R button located on the control unit for 10 seconds.

FAQ:
Q: How do I reset the device to factory settings?
A: Press and hold the R button on the control unit for 10 seconds before the first use.

CONNECTION MANUAL

Before the first use, make sure to reset the device to the factory settings: press and hold R button located on the control unit for 10 seconds.

1. DOOR PROFILE BUILT-IN CONTROL UNIT: To press this button, first remove the screw.

CU-201/2, CU-202/2, CU-103/2

CONNECTION DIAGRAM HAS TO BE PROVIDED BY THE DOOR MANUFACTURER

• FUNCTION
• COLOR
• stamp and siganture of the manufacturer

 

CONNECTION DIAGRAM:

CU-202/2, CU-103/2 + G-U,
WINKHAUS, MACO, FUHR, KFV, ROTO ENEO

1. CONTROL UNIT
2. INTERCOM
3. RELAY
4. POWER SUPPLY 12/24 V
5. NIGHT/DAY MODE

IN ORDER FOR NIGHT/DAY MODE TO FUNCTION, ADAPTER C-R-A1 SHOULD BE USED.

CU-501,CU-502 + G-U,
WINKHAUS, MACO, FUHR, KFV, ROTO ENEO

1.  CONTROL UNIT
2. INTERCOM
3. RELAY 2
4. POWER SUPPLY 12/24 V
5. NIGHT/DAY MODE

CONNECTION DIAGRAM:
BBX+ X-CABLE, KFV,
WINKHAUS, GU, FUHR

1. CONTROL UNIT
2. INTERCOM
3. LED LIGHTING
4. READER/KEYPAD
5. POWER SUPPLY 12/24 V
6. DOOR LOOP
7. MOTOR LOCK

CONNECTION DIAGRAM:

BBX+ MACO

1. CONTROL UNIT
2. INTERCOM
3. LED LIGHTING
4. READER/KEYPAD
5. POWER SUPPLY 12 V
6. DOOR LOOP
7. MOTOR LOCK

CONNECTION DIAGRAM:
BBX+ ROTO

1. READER/KEYPAD
2. CONTROL UNIT
3. LED LIGHTING
4. INTERCOM
5. POWER SUPPLY 24 V
6. DOOR LOOP
7. MOTOR LOCK
8. NIGHT/DAY MODE

CONNECTION DIAGRAM:
BBX+ WINKHAUS BLUEMOTION, STV-Set-Y

1. CONTROL UNIT
2. MOTOR LOCK
3. LED LIGHTING
4. READER/KEYPAD

DIN+ KFV, WINKHAUS, GU, FUHR, ELECTRIC STRIKE

1. CONTROL UNIT
2. INTERCOM
3. RELAY 2
4. READER/KEYPAD
5. POWER SUPPLY 12/24 V
6. ELECTRIC STRIKE
7. MOTOR LOCK

CONNECTION DIAGRAM: DIN+ MACO, FUHR

1. CONTROL UNIT
2. INTERCOM
3. RELAY 2
4. READER/KEYPAD
5. POWER SUPPLY 12 V
6. MOTOR LOCK

DIN+ ROTO NEO

1. CONTROL UNIT
2. INTERCOM
3. RELAY 2
4. READER/KEYPAD
5. POWER SUPPLY 24 V
6. MOTOR LOCK
7. NIGHT/DAY MODE

Navkom d.o.o. | Cesta v Log 19 | 1351 Brezovica | Slovenia T: 059 941 409 E: info@navkom.si W: www.navkom.si

Documents / Resources

Navkom CU-201-2 Fingerprint Reader [pdf] Instructions CU-201-2 Fingerprint Reader, CU-201-2, Fingerprint Reader, Reader

References

• User Manual