HRQ-GATE Internet Module Reset
“
Specifications:
- Model: HRQ-GATE
- Usage: Ethernet Gateway for communication between ventilation
units and external applications - Ports: 2 ports
- LEDs:
- Radio signal transmission indicator
- Device memorization indicator
- Power supply indicator
Product Usage Instructions:
1. Resetting the Internet Module:
To reset the HRQ-GATE Internet module, follow these steps:
- Locate the RESET button at the back of the gateway.
- Press and hold the RESET button for at least 10 seconds.
- The power LED will blink, indicating a reset.
- All assigned devices will be forgotten, and the device will be
restored to factory settings.
2. Connection:
- Connect the HRQ-GATE to the router using an Ethernet
cable. - Connect the power adapter to the device and power supply using
a USB cable. - Wait for the power LED to light up.
- Download the Alnor Control AIR app from Google Play or App
Store. - Follow the steps displayed in the application for further
setup.
3. User Account Registration:
WARNING: Android and iOS versions may have
different appearances. Screenshots in this manual are based on the
Android version.
- Register a new account:
- Select “Register Now” from the app’s main menu.
- Enter a username (for login).
- Enter your email address.
- Create a password and confirm it.
- Log in with your registration information.
4. Internet Gateway Configuration:
- Connect the gateway to the network. Ensure both the mobile
device with the app and the gateway are on the same network. - Scan the QR code or manually enter the code located on the back
of the gateway. - A message should confirm successful configuration.
5. Adding Heat Recovery Unit or External Sensor:
Confirmation of successful product addition will be displayed
after proper configuration.
FAQ:
Q: What do I do if the power LED does not light up after
connecting?
A: Check the power supply connections and ensure that the device
is receiving power. Try using a different power adapter if
needed.
“`
User manual
Internet module reset HRQ-GATE
User manual
Table of contents
1. Information on the manual ………………………………………………………………………………………………………………. 3 1.1. Description of the system ………………………………………………………………………………………………………. 3 1.2. How to use the manual…………………………………………………………………………………………………………… 3 1.3. Original manual ………………………………………………………………………………………………………………………. 3
2. Technical data ………………………………………………………………………………………………………………………………….. 3 2.1. Construction …………………………………………………………………………………………………………………………… 3 3.1. Reset module ………………………………………………………………………………………………………………………….. 4 3.2. Connection ……………………………………………………………………………………………………………………………… 4 3.3. User account registration……………………………………………………………………………………………………….. 4 3.4. Internet Gateway configuration …………………………………………………………………………………………….. 7 3.5. Adding heat recovery unit or external sensor………………………………………………………………………… 2 3.6. Adding more components………………………………………………………………………………………………………. 6
3. Troubleshooting ……………………………………………………………………………………………………………………………….. 7 4. Recycling ………………………………………………………………………………………………………………………………………….. 7
2
User manual
1. Information on the manual
1.1. Description of the system
The HRQ-GATE Ethernet Gateway is used for communication between the ventilation unit (PremAIR, SlimAIR, FlatAIR or MinistAIR series) and an external application (software).
1.2. How to use the manual
This manual is intended as a reference book by which qualified installers can install the HRQ-GATE and all optional device as well. This device must be used according to its purpose. Make sure you have read and understood the manual before you install and/or use the device. Please be informed that we are constantly working on development and improvement of our products hence minor differences between this document and your unit are possible.
1.3. Original manual
The original manual was prepared in Polish. Other language versions of this manual are translation of the original manual. WARNING: indicates additional information
2. Technical data
Power supply: USB adapter 230V AC to 5V DC Max USB current 500mA Environment: Operating temperature: 0-50°C Storage: Temperatures: -25 – 60°C Humidity: 5-90% (Non-condensing) Dimensions: 80x25x105 mm (HxWxD) Weight: 90g Ports: RJ45 Ethernet, Micro USB type B (power supply) Communication: RF: 863.3 MHz, Rx Class 2, range 85 m, Ethernet (10/100Mbit) Compliance: EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU, ROHS 2011/65/EC, WEEE 2012/19/EU
2.1. Construction
The gateway has three LEDs:
3
User manual
1.
Signaling the transmission of a radio signal.
2.
Signaling memorization of at least one device.
3.
Indication of power supply.
The gateway has two ports::
RJ45 communication
USB typu B power supply
3.1. Reset module
The device has a RESET button built into the back of the gateway.
Keeping the RESET button pressed for at least 10s will cause, the LED responsible for power signaling will blink. Resetting the Internet module will forget all assigned devices and restore the device to factory settings.
3.2. Connection
1.
Connect the HRQ-GATE with the Ethernet cable to the router.
2.
Connect the power adapter with the USB cable to the device and power supply.
3.
After a few seconds the power LED will light up.
4.
Download Alnor Control AIR
app from Google Play
5.
Follow the steps displayed in the application.
and App Store
3.3. User account registration
WARNING!
The Android and iOs versions may differ in appearance. The screenshots in the manual were developed
using
the
Android
version.
4
User manual
1.
Register new account
a) Select the “Register Now” box from the application’s main menu b) Enter username(will be used to log in) c) Enter e-mail adress d) Password / Confirm password
5
User manual
2.
Log in with your registration informations
6
User manual
3.4. Internet Gateway configuration
1.
Connect gateway to the network
NOTE: The mobile device on which the application is installed and the Internet gateway must be connected to the same Internet network.
7
User manual
2.
Scan the QR code or manually enter the code on the back of the gateway.
8
User manual 9
3.
Once the gateway is properly configured, a message should appear
User manual
3.5. Adding heat recovery unit or external sensor
1. From the previous window, select the “Add Product” button to select more system components. The example shows the addition of a heat recovery unit. Step 1 Select product
2
User manual Step 2 Follow the commands described on the screen and press the ‘Next’ button.
3
User manual The correct addition of a product should be confirmed with the following message.
4
User manual Incorrectly adding a product will show the following message.
5
User manual
3.6. Adding more components
Further system components are added from the “Devices” tab by selecting the “plus” sign.
6
User manual
3. Troubleshooting
Urzdzenie posiada trzy diody komunikacyjne na froncie
Symptom LED not lit LED not lit
LED not lit LED blinking
Cause No Radio communication No internet connection
No power The Gateway can not start up
Solution Perform the binding procedur again 1. Perform gateway registration 2. Check the wired Ethernet/ Internet connection Connect the USB power adapter Contact the service center
Urzdzenie posiada dwie diody komunikacyjne z tylu
Symptom LED 1 not lit LED 2 not lit or blinks
Cause No Ethernet connection No DHCP server available. Not lit: No IP address available Blinks: uses a standard IP adress (192.168.0.207)
Solution Check the router Run DHCP on the router or use a fixed IP adress
4. Recycling
This appliance bears the symbol of the barred waste bin. This indicates that, at the end of its useful life, it must not be disposed of as domestic waste, but must be taken to a collection center for waste electrical and electronic equipment, or returned to a retailer on purchase of a replacement.
It is the user’s responsibility to dispose of this appliance through the appropriate channels at the end of its useful life. Failure to do so may incur the penalties established by laws governing waste disposal.
Proper differential collection, and the subsequent recycling, processing and environmentally compatible disposal of waste equipment avoids unnecessary damage to the environment and possible related healthrisks, and also promotes recycling of the materials used in the appliance.
For further information on waste collection and disposal, contact your local waste disposal service, or the shop from which you purchased the appliance.
7
User manual Manufacturers and importers fulfil their responsibilities for recycling, processing and environmentally compatible disposal either directly or by participating in collective systems.
8
Documents / Resources
 |
Nalnor HRQ-GATE Internet Module Reset [pdf] User Manual HRQ-GATE Internet Module Reset, HRQ-GATE, Internet Module Reset, Module Reset |