myFirst Sketch II Magnetic Sketch Pad

Get to know myFirst Sketch II

Partially Erase

1.  Use the stylus to draw on your Sketch II.
2. To Partially erase, press the Erase button once.
3. Turn over the stylus and erase the errors by using the silicon tip.
   The partial erasing will last for 15 seconds. The Delete button will not work during this period.
4. Press the Erase button again, and you will be back to the regular drawing mode.

Erase All

Click the Delete button to erase all.

Warning

•  Do not store in high humidity environment
•  Avoid open flames
•  Use provided stylus to sketch. Do not apply pressure on screen with pointed objects
•  In case of liquid leakage, wear gloves and place the product in a sealed bag. If liquid comes into contact with the skin, wash it thoroughly with soap and water. If irritation occurs, seek professional treatment immediately.
•  Do not dismantle the device. Contact our service department for technical help.

Documents / Resources

myFirst Sketch II Magnetic Sketch Pad [pdf] User Manual Sketch II, Magnetic Sketch Pad, Sketch II Magnetic Sketch Pad

References

• User Manual