my Q CH361 1 Button Remote Control Instruction Manual

Overview
Your remote control is compatible with all Chamberlain®, LiftMaster, and Craftsman® garage door openers manufactured after 1997 with the exception of Craftsman Series 100. Your remote control can be programmed to operate compatible devices, such as garage door openers and gate operators. The images throughout this manual are for reference only and your product may look different.
WARNING
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with the remote control transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Program Your Remote to Your Wi-Fi Garage Door Opener Using the myQ App
HIGHLY RECOMMENDED: Connect your Wi-Fi Garage Door Opener to the myQ app and program your Remote to the Garage Door Opener to unlock exciting features such as remote naming, notifications and access history.
Garage Door Opener Already Connected to the myQ App
Scan the QR code on the reverse side of your remote and follow the programming instructions in the myQ app.

If Your Garage Opener is Not Connected to the myQ App

1. Look for a “Wi-Fi” or a “Powered by myQ” logo to determine if your garage door opener is myQ compatible.
   
2. Scan the QR Code below to download the myQ app. Follow the instructions in the myQ app to connect your garage door opener.
   
3. Once your garage door opener is connected, scan the QR code on the reverse side of your remote, and follow the programming instructions in the myQ app.
   
4. Once your remote is programmed in the myQ app, you can name your remote, view access history and receive notifications when your remote activates the garage door opener.

Programming Using the Learn Button
Before You Begin
Be sure the garage door is clear of ALL obstructions. Make sure the garage door opener has a working light because it is a programming indicator.
Button Remote Control
Model: CH361

RECOMMENDATION: Read through all programming steps before you start.
Program Using the Learn Button (continued)
Method A: Program to a Security+ 3.0 Protocol Garage Door Opener (White Learn Button) Using the Learn Button on Door Control Panel.
RECOMMENDATION: Have your door control panel product manual available, as models vary in how they set the garage door opener into programming mode.

1. Follow the instructions below for your door control panel model to set your garage door opener into programming mode.
   Door Control Panel
   Lift the door activation panel.
   Press the LEARN button twice (after the second press, the LED on the door control panel will pulse repeatedly).
   
   Door Control Push Button
   Press and hold the light button, then press and release the door activation button. The button LED will begin to flash.
   
   Smart Door Control Panel
   Select MENU, then select PROGRAM and follow on screen instructions.
   
2. Within 30 seconds, press and hold the button on the remote control. Release the button when the garage door opener lights flash and/or two clicks are heard.
   

TEST FOR SUCCESS: Press the remote button. The garage door opener will activate. If the garage door does not activate, repeat the programming steps.
Program Using the Learn Button (continued)
Method B: Program to a Security+ 3.0 Protocol Garage Door Opener (White Learn Button) Using the Opener’s Learn Button.

1. Locate the LEARN button on your garage door opener (a ladder may be required).
   Press and immediately release the LEARN button.
   NOTE: The LEARN LED will glow steadily for 30 seconds.
   
   
2. Within 30 seconds, press and hold the button on the remote control.
   Release the button when the garage door opener lights flash and/or two clicks are heard.
   

TEST FOR SUCCESS: Press the remote button. The garage door opener will activate. If the garage door does not activate, repeat the programming steps.
Program Using the Learn Button (continued)
Method C: Program to All Compatible Garage Door Openers (White, Yellow, Purple, Red, & Orange Learn Buttons)

1. Start with your garage door closed.
   IMPORTANT: The remote will activate your garage door during programming. Be sure the door is clear of ALL obstructions.
   
2. Press and release the remote button 6 times within 4 seconds. The red LED on the remote remains solid to confirm programming mode is active.
   
3. Option 1: Follow the instructions below for your door control panel model to set your garage door opener into programming mode.

RECOMMENDATION: Have your door control panel product manual available, as models vary in how to set the garage door opener into programming mode.
Door Control Panel
Lift the door activation panel. Press the LEARN button twice (after the second press, the LED on the door control panel will pulse repeatedly).


Door Control Push Button
Press and hold the light button, then press and release the door activation button. The button LED will begin to flash.

Smart Door Control Panel

1. Select MENU
2. Scroll down and select PROGRAM.
3. Scroll down and select REMOTE
   Do not follow on screen instructions.
   MOVE DIRECTLY TO STEP 04.
   
   Method C: Program to All Compatible Garage Door Openers (White, Yellow, Purple, Red, & Orange Learn Buttons) (continued)
   Option 2: Locate the LEARN button on your garage door opener (a ladder may be required) Press and immediately release the LEARN button.
   NOTE: The LEARN LED will glow steadily for 30 seconds.
   
4. Press and release the button twice (second press must be within 20 seconds of the first press). The red LED will flash 04 intermittently as the remote sends the preprogrammed codes to the garage door opener.
   IMPORTANT: For garage door openers with a White Learn Button, when the garage door opener lights flash and/or clicks once, the remote has successfully programmed. For all other color Leam Button garage door openers, continue to
   
5. Wait for the garage door opener to move the door. This can take up to 25 seconds. During this time, your garage door opener light might flash. When the garage door opener moves, within 3 seconds, press and release the button on the remote to confirm the code and exit programming.
   

TEST FOR SUCCESS: Press the remote button. The garage door opener will activate. If the garage door does not activate, repeat the programming steps.
Replacing the Battery
The LED on your remote control will stop flashing when the battery is low and needs to be replaced. Replace the battery with only 3V CR2032 coin cell battery. Dispose of old battery properly. To replace battery, follow the instructions as shown below.

1. On the back side of the remote, using a Phillips #1 screwdriver, unscrew the captive screw until it rotates freely.
   
2. With the remote button side up, pry open the remote top housing from the bottom housing (if the housing will not separate, check that the captive screw is rotating freely).
   NOTE: The logic board could detach from the remote bottom. If this occurs, carefully replace using the guiding holes in the board.
   
   
3. With a cotton swab, push the old battery out of its holder in the direction of the nearest edge.
   
4. Insert the replacement battery positive side up.
   
5. Align the remote top and bottom housing so they clip together. Tighten the captive screw until the top and bottom housing no longer shift (do not overtighten the screw to avoid cracking the plastic housing)
   
   

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
  A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  

WARNING

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death.
• Call a local poison control center for treatment information.
• Battery Type: CR2032
• Battery Voltage: 3 V
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
• Ensure the batteries are installed correctly according to polarity (+ and -).
• Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
• Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
• Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

Replacement Parts

Description	Part Number
Visor Clip	041-0494-000

One Year Limited Warranty
The Chamberlain Group LLC (“Seller”) warrants to the first consumer purchaser of this product that it is free from defect in materials and/or works man ship for a period of 1 year from the date of purchase.
For more information, visit www.myq.com/warranty
Contact Us
For additional information or assistance, please visit: support.chamberlaingroup.com
NOTICE: This device complies with part 15 of the FCC rules and Innovation, Science and Economic Development Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Documents / Resources

my Q CH361 1 Button Remote Control [pdf] Instruction Manual CH361 1 Button Remote Control, CH361, 1 Button Remote Control, Remote Control, Control, Remote

References

• User Manual