MY ARCADE DGUNL-4123 Nano Player User Guide
INSTALLATION INSTRUCTION
Includes
Nano Player and user guide
Materials needed (not included):
4 AAA batteries and mini-screwdriver or USB-C® cable
- Joystick
- Power switch
- Volume up button
- Volume down button
- Battery cover
- Power port (USB-C IN)
- RESET button
- SELECT button
- START button
- A button
- B button

- Remove the battery cover located on the back of the console.
- Insert 4 AAA batteries and replace the battery cover.
- If you do not want to use batteries, gently insert the USB-C® end of a USB-C® cable (not included) into the power port (USB-C IN) located on the back of the console. Gently insert the other end of the cable into a powered USB port. When using this option you do not need to add batteries.
- Move the power switch from o to on.
- Batteries should be installed and replaced only by an adult.
- Do not mix used and new batteries (replace all batteries at the same time).
- Do not mix dierent brands of batteries.
- We do not recommend using batteries labeled “Heavy Duty”, “General Use”, “Zinc Chloride”, or “Zinc Carbon”.
- Do not leave batteries in the controller for long periods of non-use.
- Remove batteries and store them in a cool, dry place when not in use.
- Remove depleted batteries from the unit.
- Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends are facing in the correct direction. Insert the negative end first.
- Do not use damaged, deformed or leaking batteries.
- Do not recharge non-rechargeable batteries.
- Remove rechargeable batteries from the device before charging.
- Dispose batteries only at the government approved recycling facilities in your area.
- Do not short circuit battery terminals.
- Tampering with the product can result in damage to your product, void of warranty and
could cause injuries. - Warning: CHOKING HAZARD small parts. Not suitable for children under 36 months.
- The restriction accompany the age warning.
- Adapter for use with the device requires: 5V DC, 1A.
- Only use an adapter that meets the device’s requirements.
- The adapter is not a toy.
- Adapters used with the device are to be regularly examined for damage to the cord, plug, enclosure and other parts.
- Please keep user guide for important information.
- The toy shall only be used with a transformer for toys or a power supply for toys.
- Rechargeable batteries should be charged under adult supervision.
- The product should only be connected to equipment bearing either of the following symbols.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This equipment may not cause harmful interference.
- This equipment must accept any interference received, including interference that may cause undesired operation
Website
www.MyArcadeGaming.com
Save a tree, register online
MY ARCADE® is making the eco-friendly choice to have all products registered online. This saves the printing of physical paper registration cards. All the information you need to register your recent MY ARCADE® purchase is available at:
www.MyArcadeGaming.com/product-registration
Documents / Resources
![]() |
MY ARCADE DGUNL-4123 Nano Player [pdf] User Guide 207 Games, DGUNL-4123 Nano Player, DGUNL-4123, Nano Player, Player |