MUNBYN AS01 Android Barcode Scanner

Scan the QR code or visit the link below to access user manuals in other languages.

User manuals included (Cerman, French, Spanish, Italian)

Packing Open and Installation

What”s in the Box

Contact Us: WhatsApp +86133 0248 2997

No.	Unpack	No.	Unpack
l	Device	6	Lanyard
2	Battery	7	Hand Strap (Optional)
3	USB Cable	8	Pistol (Optional)
4	Charger	9	MUNBYN Manual
5	Protective Film	10	Unboxing Card

User Manual & SOK Download 
You can download the AS0l SDK and multi-language user manuals by clicking the following link or scanning the QR code. User manuals included (S Spanish, Italian, English, French, German): munbyn.biz/as0l

Tips: You can also download the SDK in “About” in the M-Scan APP.

Appearance

ASOl Android Scanner Easy Setup Guide Vl.00

	SCAN	The scanning button islocatedc on both sides
	V lume +/-	Volume up and down
3	Front Camera	Front-facing 5-megapixel camera
4	Power	Locate on the right side, press the ON/OFF device
5	PTT key	Locate on the right side, its function can be defined by the software
7	Type-C	Charging or transferring data.
8	Rear camera	13-megapixel camera on the rear.
9	NFC	Read and write NFC tags.

Install the Battery, SIM card, and TF card. 

• As shown in the picture, use your index finger and thumb to squeeze the pick inwards at the same time to remove the back cover.

lnstall the NANO SIM or TF card in the direction shown in the icon. Contact Us: WhatsApp +86133 0248 2997

Tips: Install the SIM card/TF card after shutting down the device.

Please turn the battery lock to the open position and then install the battery according to the figure below.

Note: After installing the battery, please turn the battery lock to the locked state.

Handle Installation
Pull out the spring retainer, as shown below, to secure the device to the handle.

Note: The pistol is an optional accessory

M-Scan Settings

M-Scan is a mobile device data capture software that easily captures, processes, and transmits scan data. It easily integrates this data with the customer’s existing applications, reducing the need for additional programming or modification of application code.

Basic Settings

Enable M-Scan
Make sure M-Scan is enabled before using the scanner. Generally, M-Scan is enabled by default to ensure that you can use it out of the box.

Confirm that hat M-Scan is enabled.

Note: You can also reset M-Scan to its initial state from this page.

For example, if the scanning laser does not light up when you press the scan button, you can try clicking “Restore” to restore factory settings.

Using the Profiles

• M-Scan functionality is based on profiles containing a group of scan-related settings.
• M-Scan includes two preset profiles to support common or specific needs.
  1. ProfileO: The default profile. It will automatically take effect for any application that has not been associated with an M-Scan profile. Usually, we can change the scan settings in this profile.
  2. Launcher: The profile is used when the device is on the home screen. This is enabled by default. If you disable it, you will not be able to use the scanner on the home screen.

Barcode Input Settings

• Click “ProfileO (Default)” to set the default profile. If you do not create a new profile and associate it with an application, the scan settings of “ProfileO (Default)” will take effect for all a­pplications.

ProfileO(default) Configuration

• • Enable Configuration File: The profile is enabled by default.
• Enable Scanning Function: The scanner is enabled by default.
• Webpage Detection and Redirect: Scanning a web link will automatically redirect you to that web page.
• Floating Button: The Floating Scan button will appear on the screen when enabled.
• Scan Success Beep: Select the scanning success prompt tone.
• Scan Failure Beep: Enable or disable the scan failure prompt sound.
• Scan Vibration Alert: Enable or disable the scanning vibration prompt.
• Button Trigger Mode: Select the key trigger method.
• Character Set: Character set selection is automatically selected by default.
• Set Scan Parameters: Used to configure scanner-related parameters.
• Decoders: Common barcode settings. You can enable or disable a barcode.

Tips: 

1. If a barcode cannot be scanned, you need to check if that type of barcode is enabled.
2. lIf fyou are experiencing missing numbers or characters after scanning a barcode, you can click on that barcode type to enable the Send Checksum setting. An example is the UPC barcode:

Barcode Processing Settings
After scanning the barcode data, M-Scan can process the data and output it according to the requirements. The data can be processed in the following three ways:

CSl Formatting
GSl barcode formatting: mainly for the processing of GSl type barcodes, such as splitting barcodes, deleting GS characters, etc.

1. The following table shows examples of GSl barcode format settings:

Basic Data Formatting
Basic Data Formatting: perform simple processing operations on the data, such as adding prefixes and suffixes, deleting characters, etc.

• Add Prefix: Adds numbers or characters in front of the barcode data.
  For example, input “ABC,” the original barcode is “12345”, then the final output is “ABC12345”.
• Add Suffix: Adds numbers or characters after the barcode data.
  For example, if you input “ABC” and the original barcode is “12345”, the final output will be “12345ABC”.
• Send TAB key: The read data will be suffixed with a tab character “\t.” When reading data in Excel, the cursor will automatically move to the next cell.
• Send ENTER key: Enable this setting, and the output will wrap automatically. (Enabled by default)
• Delete starting characters: Enter the number of characters to delete from the beginning.
• Delete Ending characters: Enter the number of characters to delete from the end.
• Delete Content: It will delete the characters you entered.

Advanced-Data Formatting
Advanced data formatting: You can perform programming­like operations on data: select some predetermined rules and process the data in sequence.

• Enable advanced data formatting. By default, there is a preset rule, Rule 0, which does not process the barcode in any way. You can click the “+” sign to create multiple rules.
• Rule triggering conditions: You can trigger the next action of this rule by specifying a string, a barcode data position, a length, or a barcode type.
• Act Click the “+” sign to select the next action that this rule can perform. You can add multiple actions to meet some complex requirements.

Data Output Mode Settings

Key Output
Key output is the default scanning output mode enabled by M-Scan. By default, when you scan a barcode, the barcode data will be output in the input box in a simulated keystroke manner. You have three key output options:

• Output to Cursor Position: After scanning the barcode, the data will be immediately displayed where the cursor is.
• Simulate Keyboard Output: The barcode data will be output in simulated keyboard input mode. (Default enabled)
• Output and Overwrite Cursor Position: Replace the data at the cursor position with the barcode data.

Broadcast Output
Broadcast Output uses Android’s broadcast mechanism to transmit barcode data to the user’s APP. Default off.

Clipboard Output
The barcode data scanned by the device will be saved in the clipboard. Default off.

New Configuration File
With M-Scan, you can create a profile and link it to your app. You can achieve:

• Create multiple profiles and associate different applications so that different applications can process the same scan data in different ways.
• Create a single profile and associate it with multiple applications to acquire and process scan data in the same way.
• Note: A profile can be associated with one or more pages or apps, but a page or app can only be associated with one profile.

New Configuration File

1. Click the New Configuration File.
2. Enter the name of the Profile in the pop-up input box and click OK.
3. Finish creating the Test Configuration File.

Associated APP

1. Select the Test Configuration File you created.
2. Enter the name of the Profile in the pop-up input box and click OK.
3. Finish creating the Test Configuration File.
4. For example, you can associate a configuration file with OrcaScan. When you select the “*” symbol, all active pages in OrcaScan will be associated. You can also select a specific page to associate with

Customer Services

M-Scan APP provides a customer service interface. Through this function, you can talk to MUNBYN technical support staff ononlineo help you solve your problems.

• Click “Online Consultation” to chat with support staff online.

About
You can download the SDK file or update M-Scan from the M-Scan About page.

Inventory Management Software

• This device is compatible with a large number of inventory management software on the market. This section will briefly describe three inventory management software programs.
• You can download the following three inventory management applications from the Google Play Store.
• Note: These inventory software offer limited free-use functionality and may have additional charges.

Odoo
Odoo is an open-source enterprise resource planning (ERP) and customer relationship management (CRM) system that provides a comprehensive suite of business applications, including accounting, inventory management, sales, procurement, project management, and more.

OrcaScan
OrcaScan is a barcode scanning app that offers a variety of features, including barcode creation, printing, and scanning, supports offline use, and can integrate with multiple systems such as Google Sheets, Excel, and Power Bl. The application allows you to export the scanned barcode data in Excel format.

Zoho Inventory
Zoho Inventory is a cloud-based inventory management solution designed to help businesses track stock in real-time and manage orders and warehouse operations. It supports multi-channel selling and barcode scanning and integrates with popular e-commerce platforms and shipping carriers, enhancing efficiency and accuracy for retail, wholesale, and e-commerce businesses.

Tips: You can turn off the “Enter” terminator according to your needs. Please refer to section 2.3.2. Contact Us:

Reset Options

Reset network settings and app preferences. You can also reset your device to its factory defaults.

1. From Settings, tap System –> Reset options. The following options are available:
   • Reset Mobile Network Settings: You can reset your mobile network settings.
   • Reset Bluetooth & Wi-Fi: You can reset Wi-Fi nd Bluetooth settings with Reset network settings.
   • Reset app preferences: You can reset all app preferences settings and will not lose any app data.
   • Erase all data (factory reset): You can reset your device to factory defaults, erasing all data from your device.

Note: This action permanently erases ALL data from the device, including Google or other account settings, system and application data and settings, downloaded applications, as well as your music, photos, videos, and other files.

Contact us

• WhatsApp: +86 13302482997
• Scan the QR code for WhatsApp online chat
• Contact Us: WhatsApp +86133 0248 2997
• MUNBYN provides a 24-month warranty and lifetime free service.
• If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement.
• Email: support@munbyn.com (24*7 online support)
• Website: www.munbyn.com (how-to videos, warranty details) Skype: + l 628 229 3612

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, purunderrt 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver:
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:

This Android Barcode Scanner meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement

• The SAR limit of USA (FCC) is 1.6 W/kg, averaged over one gram of tissue.

Device types: Android Barcode Scanner (2BF4EAS01) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.433W/k,g, and when properly worn on the body, is 0.755W/The hotspot SAR value is 0.755W/kg; the simultaneous transmission SAR value is 0.689W/kg on the head and 1.115W/ kg on the body. This device was tested for typical body-worn operations, with the back of the handset kept 10mm from the body.

To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna. IC Warning: This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Information and Statement The SAR limit of the USA is 1.6 W/kg, averaging over one gram of tissue.

Device types:
Android Barcode Scanner (IC: 29232-AS01) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.433W/k,g, and when properly worn on the body, is 0.755W/kg. This device was tested for typical body-wom operation, ns with the back of the handset kept 10mm from the body. To maintain compliance with IC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with IC RF exposure requirements and should be avoided.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party bebelt clipsholsters and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can se used in portable exposure conditions without restriction. 5150-5250MHz for indoor use only

FAQs

1. Why can't the device be turned on or charged?

*Due to the impact of long-distance transportation, the battery may enter sleep mode. *Please charge it for half an hour before turning 1t on. Please try to press and hold the power button for more than 20 seconds to force a restart The battery still cannot be turned on after charging for half an hour; please check whether there is a problem with the charging plug or charging cable. Please replace the charging plug/charging cable to charge. If you have a charging stand, please use the charging stand to perform a charging test. The device has a removable batter, and you have extra batteries. Try replacing the batteries and try again.

2. Why does the scan light not appear after I press the device scan button?

*Refer to Section 2.1.l to restore M-Scan to factory settings. *Please try restarting your device. *Please try to reset the device. Please refer to Chapter 4.0. *If this does not work, please contact Technical Support.

3. How to use the battery correctly?

The battery is a lithium-ion battery. If it is out of power, please charge it immediately. Do not fully charge or deplete the battery for a long time. It is best to keep 50% of the power for storage. If you do not use the device for a long time, it is best to unplug the battery from the device.

4.Why is the light on when scanning,g, but there is no data?

*Refer to section 2.2 to check whether this barcode is enabled. *2. Please try to change the scan output mode to simulate keystrokes. Please refer to section 2.4.1.

5. Why is there a lack of numbers in the output when I scan successfully? (Characters)

Please refer to section 2.2 to enable the transmission check digit setting for this barcode type.

Documents / Resources

MUNBYN AS01 Android Barcode Scanner [pdf] User Guide AS01, AS01 Android Barcode Scanner, Android Barcode Scanner, Barcode Scanner, Scanner

References

• User Manual