MULTAN ELECTRONICS CR2023 3V Wireless 433 RF Remote Control
Technical Parameter
- Model: xx-21RF
- Battery Model: CR2025
- Working Voltage: 3V
- Effective Distance: 8 meters to 12 meters
Product Overview
This remote control is used for Christmas tree products. The main buttons are: power, timer, brightness adjustment, and function mode.
Product Usage Instructions
Precautions
- Do not place the remote control in high temperatures, as it may be affected by water and fire.
- Do not remove the remote control battery.
- Avoid swallowing batteries.
- If not used for a long time, insert the insulation sheet into the battery door to prevent battery leakage.
- Battery Model: CR2023 3V
Common Problems and Solutions
- Check if the remote control battery is properly installed.
- Ensure the remote control battery is charged.
- Check if the insulation sheet inserted into the remote control battery is removed from the product.t
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to certain conditions to prevent interference. Users should follow guidelines such as reorienting or relocating the receiving antenna, increasing the separation between the equipment and the receiver, and consulting professionals for assistance.
Product Illustration Description
(Include relevant product illustration details here)
Precautions
- Do not place the remote control in high temperatures, as it may be affected by water and fire.
- Do not remove the remote control battery
- Prohibit swallowing batteries
- If not used for a long time, please insert the insulation sheet into the battery door to prevent battery leakage
- Battery model (CR2023 3V)
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FAQ
Q: What should I do if the remote control does not work?
A: Check the battery installation, charge level, and ensure the insulation sheet is removed from the battery.
Documents / Resources
 |
MULTAN ELECTRONICS CR2023 3V Wireless 433 RF Remote Control [pdf] User Manual XX-21RF, 2BOGH-XX-21RF, 2BOGHXX21RF, CR2023 3V Wireless 433 RF Remote Control, CR2023 3V, Wireless 433 RF Remote Control, 433 RF Remote Control, Remote Control, Control |