Boardcon Embedded Design CM1126B-P Embedded Design System
Speċifikazzjonijiet
- Karatteristika: CM1126B-P
- CPU: Quad-core Cortex-A53
- RDD: 2GB LPDDR4 (sa 4GB)
- eMMC: 8GB (sa 256GB)
- FLASH: DC 3.3V
- Qawwa: 4-Lane
- MIPI DSI: 3-CH
- I2S: 6-CH
- I2C: 2-CH
- MIPI CSI: 4-Lane
- RGB LCD: 24bit
- Kamera: 1-CH(DVP) u 2-CH(CSI)
- USB: 2-CH (USB HOST2.0 u OTG 2.0)
- Ethernet: 1000M GMAC
- SDMMC: 2-CH
- JISTA ': 2-CH
- SPI: 2-CH
- UART: 7-CH, 1-CH(DEBUG)
- PWM: 11-CH
- ADC IN: 4-CH
- Dimensjoni tal-Bord: 34 x 35mm
Istruzzjonijiet għall-Użu tal-Prodott
Gwida tad-Disinn tal-Hardware
This section provides detailed information about the peripheral circuit reference and PCB footprint.
Karatteristiċi Elettriku tal-Prodott
Din it-taqsima tkopri d-dissipazzjoni, it-temperatura, u l-affidabbiltà tat-testijiet relatati mal-prodott.
Introduzzjoni tas-CM1126B-P
This section includes a summary of the product and its features,such as memory organization with LPDDR4 RAM up to 4GB and EMMC 4.51 up to 256GB.
Dijagramma tal-Blokk CM1126B-P
This section provides block diagrams for RV1126B-P and the development board.
Dimensjoni tal-PCB CM1126B-P
This section details the PCB dimensions of the CM1126B-P product.
Definizzjoni tal-Pin CM1126B-P
This section lists the pin signals and their corresponding descriptions or functions for the product.
Introduzzjoni
Dwar dan il-Manwal
Dan il-manwal huwa maħsub biex jipprovdi lill-utent b'overview tal-bord u l-benefiċċji, kompleta speċifikazzjonijiet karatteristiċi, u twaqqaf proċeduri. Fiha wkoll informazzjoni importanti dwar is-sigurtà.
Feedback u Aġġornament għal dan il-Manwal
Biex ngħinu lill-klijenti tagħna jagħmlu l-aħjar mill-prodotti tagħna, aħna kontinwament nagħmlu riżorsi addizzjonali u aġġornati disponibbli fuq il-Boardcon websit (www.boardcon.com , www.armdesigner.com).
Dawn jinkludu manwali, noti tal-applikazzjoni, ipprogrammar examples, u softwer u ħardwer aġġornati. Iċċekkja perjodikament biex tara x'hemm ġdid!
Meta nkunu qed nipprijoritizzaw ix-xogħol fuq dawn ir-riżorsi aġġornati, ir-rispons mill-klijenti huwa l-influwenza ewlenija, Jekk għandek mistoqsijiet, kummenti jew tħassib dwar il-prodott jew il-proġett tiegħek, jekk jogħġbok ikkuntatjana fuq support@armdesigner.com.
Garanzija Limitata
Boardcon jiggarantixxi li dan il-prodott ikun ħieles minn difetti fil-materjal u l-abbilità għal perjodu ta’ sena mid-data tax-xiri. Matul dan il-perjodu ta' garanzija, Boardcon ser isewwi jew jissostitwixxi l-unità difettuża skont il-proċess li ġej:
Kopja tal-fattura oriġinali għandha tiġi inkluża meta l-unità difettuża tiġi rritornata lil Boardcon. Din il-garanzija limitata ma tkoprix ħsarat li jirriżultaw minn dawl jew żidiet oħra ta 'enerġija, użu ħażin, abbuż, kundizzjonijiet anormali ta' tħaddim, jew tentattivi biex tinbidel jew timmodifika l-funzjoni tal-prodott.
Din il-garanzija hija limitata għat-tiswija jew il-bdil tal-unità difettuża. Boardcon fl-ebda każ m'għandu jkun responsabbli jew responsabbli għal kwalunkwe telf jew danni, inklużi iżda mhux limitati għal kwalunkwe qligħ mitluf, danni inċidentali jew konsegwenzjali, telf ta 'negozju, jew profitti antiċipattivi li jirriżultaw mill-użu jew inabbiltà li jintuża dan il-prodott.
Tiswijiet li jsiru wara l-iskadenza tal-perjodu ta 'garanzija huma soġġetti għal ħlas ta' tiswija u l-ispiża tat-tbaħħir tar-ritorn. Jekk jogħġbok ikkuntattja lil Boardcon biex tirranġa għal kwalunkwe servizz ta' tiswija u biex tikseb informazzjoni dwar il-ħlas tat-tiswija.
Introduzzjoni
Sommarju
The CM1126B-P system-on-module is equipped with Rockchip’s RV1126B-P build in quad-core Cortex-A53, 3.0 TOPs NPU and RISC-V MCU.
Huwa ddisinjat speċifikament għall-apparati IPC/CVR, apparati tal-Kamera AI, apparati interattivi intelliġenti, u robots żgħar. Is-soluzzjoni ta 'prestazzjoni għolja u enerġija baxxa tista' tgħin lill-klijenti jintroduċu teknoloġiji ġodda aktar malajr u jtejbu l-effiċjenza ġenerali tas-soluzzjoni.
L-inqas daqs jista 'jitqiegħed fuq 38board.
Please note CM1126B-P V1 change to V2 then CPU exchange to RV1126B-P, the Reset & OTG_VBUS signal and WIFI/BT module’s GPIO voltage must be change to 3.3V.
Karatteristiċi
- Mikroproċessur
- Quad-core Cortex-A53 sa 1.6G
- 32KB I-cache u 32KB D-cache għal kull qalba, 512KB L3 cache
- 3.0 Unità tal-Proċess Neural TOPS
- RISC-V MCU biex isostni boot veloċi ta '250mS
- Max 12M ISP
Organizzazzjoni tal-Memorja - RAM LPDDR4 sa 4GB
- EMMC 4.51 sa 256GB
- Decoder/Encoder tal-vidjo
- Jappoġġja vidjo dekodifika/kodifika sa 4K@30fps
- Jappoġġja dekodifikazzjoni f'ħin reali ta 'H.264/265
- Jappoġġja l-kodifikazzjoni tal-vidjo UHD H.264/265 f'ħin reali
- Daqs tal-istampa sa 8192 × 8192
- Subsistema tal-Wiri
- Output tal-vidjo
Jappoġġja 4 korsiji MIPI DSI sa 2560 × 1440 @ 60fps
Jappoġġja output parallel RGB ta' 24-bit - Immaġni fi
Jappoġġja sa interface DVP 16bit
Jappoġġja 2ch MIPI CSI 4lanes interface
- Output tal-vidjo
- SAI
- Tliet interfejsijiet I2S/PCM/TDM
- Appoġġ Mic array Sa 8ch PDM/TDM interface
- Appoġġ output awdjo PWM
- USB
- Żewġ interfaces USB 2.0
- USB 2.0 OTG wieħed, u hosts USB 2.0 wieħed
- Ethernet
- RTL8211F abbord
- Appoġġ 10/100/1000M
- I2C
- Sa sitt I2Cs
- Appoġġ modalità standard u modalità veloċi (sa 400kbit/s)
- SDIO
- Appoġġ protokoll SDIO 3.0
- Sa 2-CH SDMMC
- JISTGĦU
- Appoġġ CAN FD protokoll
- Sa 2-CH CAN
- SPI
- Sa żewġ kontrolluri SPI,
- Interface serjali sinkroniku full-duplex
- UART
- Appoġġ sa 8 UARTs
- UART0 b'2 wajers għal għodod ta 'debug
- Inkorporati żewġ FIFO 64byte
- Appoġġ RS485 għal UART1 ~ 7
- DSMC
- Achieve low cost FPGA connection
- Appoġġ għall-modalità ta' trasferiment tas-serje tal-wajer 8-16
- Support up to select 4 chips, and signals configured to be valid simultaneously in transaction
- ADC
- Sa erba 'kanali ADC
- Riżoluzzjoni 13-bit
- Voltage firxa tad-dħul bejn 0V sa 1.8V
- Appoġġ sa 2MS/ssamprata tal-linarda
- PWM
- Total ta' 28-ch b'interfaċċja ta' 4 PWMs
- Only PWM2 can generates waveform through lookup table
- Appoġġ għall-modalità kontinwa u l-modalità tal-ħruġ ta' darba
- Appoġġ għall-modalità ta' captions tad-dħul
- Unità tal-enerġija
- Qawwa diskreta abbord
- Input wieħed 3.3V
Dijagramma tal-Blokk
Dijagramma tal-Blokk RV1126B-P
Dijagramma tal-Blokk tal-Bord tal-Iżvilupp
Speċifikazzjonijiet tas-CM1126B-P
| Karatteristika | Speċifikazzjonijiet |
| CPU | Quad-core Cortex-A53 |
| DDR | 2GB LPDDR4 (sa 4GB) |
| eMMC FLASH | 8GB (sa 256GB) |
| Qawwa | DC 3.3V |
| MIPI DSI | 4-Lane |
| I2S | 3-CH |
| I2C | 6-CH |
| MIPI CSI | 2-CH 4-Lane |
| LCD RGB | 24bit |
| Kamera | 1-CH(DVP) u 2-CH(CSI) |
| USB | 2-CH (USB HOST2.0 u OTG 2.0) |
| Ethernet | 1000M GMAC |
| SDMMC | 2-CH |
| JISTGĦU | 2-CH |
| SPI | 2-CH |
| UART | 7-CH, 1-CH(DEBUG) |
| PWM | 11-CH |
| ADC IN | 4-CH |
| Dimensjoni tal-Bord | 34 x 35mm |
Dimensjoni tal-PCB CM1126B-P
Definizzjoni tal-Pin CM1126B-P
| Pin | Sinjal | Deskrizzjoni jew funzjonijiet | GPIO serjali | IO Voltage |
|
1 |
LCDC_D19_3V3 | VI_CIF_D15_M1/SAI1_MCLK_
M2/PWM3_CH3_M1 |
GPIO5_C3_d |
3.3V |
|
2 |
LCDC_D20_3V3 | VI_CIF_VSYNC_M1/SAI1_SDO
_M2/PWM3_CH4_M1 |
GPIO5_C4_d |
3.3V |
|
3 |
LCDC_D21_3V3 | VI_CIF_CLKOUT_M1/SAI1_SC
LK_M2/PWM3_CH5_M1 |
GPIO5_C5_d |
3.3V |
|
4 |
LCDC_D22_3V3 | VI_CIF_CLKIN_M1/SAI1_LRCK
_M2/PWM3_CH6_M1 |
GPIO5_C6_d |
3.3V |
|
5 |
LCDC_D23_3V3 |
VI_CIF_HSYNC_M1/SAI1_SDI_
M2/PWM3_CH7_M1 |
GPIO5_C7_d |
3.3V |
| 6 | GND | Art | 0V | |
|
7 |
GPIO3_B7_d_3V3 |
UART1_RX_M1/I2C5_SDA_M1/
SAI2_SDI1_M0 |
GPIO3_B7_d |
3.3V(V2) |
|
8 |
BT_WAKE |
SPI1_CSN1_M1/SAI2_MCLK_M 0/SDMMC1_DETN/UART1_TX_
M1/I2C5_SCL_M1 |
GPIO3_B6_d |
3.3V(V2) |
| 9 | WIFI_REG_ON | SPI0_MOSI_M0 | GPIO0_B0_d | 3.3V(V2) |
| 10 | BT_RST | SPI0_MISO_M0 | GPIO0_B1_d | 3.3V(V2) |
| 11 | WIFI_WAKE_HOST | SPI0_CLK_M0 | GPIO0_B2_d | 3.3V(V2) |
| 12 | BT_WAKE_HOST | SPI0_CS0n_M0 | GPIO0_A7_u | 3.3V(V2) |
| 13 | PWM0_CH7_M0 | I2C3_SCL_M0 | GPIO0_C0_d | 3.3V |
| 14 | PWM0_CH6_M0 | I2C3_SDA_M0 | GPIO0_C1_d | 3.3V |
|
15 |
UART0_TX_M1 |
JTAG_TCK_M2/CAN1_RXD_M0
/PWM2_CH6_M0(Għad-debugging) |
GPIO5_D6_u |
3.3V |
|
16 |
UART0_RX_M1 |
JTAG_TMS_M2/CAN1_TXD_M0
/PWM2_CH7_M0 (For debug) |
GPIO5_D7_u |
3.3V |
|
17 |
SAI0_MCLK_M0_3
V3 |
PWM2_CH6_M1 |
GPIO7_A2_d |
3.3V |
|
18 |
SAI0_SCLK_M0_3V
3 |
PWM2_CH4_M1 |
GPIO7_A0_d |
3.3V |
|
19 |
SAI0_SDI3_M0_3V
3 |
SAI0_SDO1_M0/PDM_SDI3_M
0/UART2_RTSN_M1 |
GPIO7_A7_d |
3.3V |
|
20 |
SAI0_SDO0_M0_3V
3 |
DSM_AUD_LP |
GPIO7_A5_d |
3.3V |
|
21 |
SAI0_LRCK_M0_3V
3 |
DSM_AUD_LN/PWM2_CH7_M1 |
GPIO7_A3_d |
3.3V |
|
22 |
PDM_SDI1_3V3 |
SAI0_SDI1_M0/SAI0_SDO3_M 0/DSM_AUD_RP/I2C1_SDA_M
3/UART2_TX_M1 |
GPIO7_B1_d |
3.3V |
|
23 |
PDM_CLK1_3V3 |
I2C4_SCL_M3
/PWM2_CH5_M1 |
GPIO7_A1_d |
3.3V |
|
24 |
PDM_SDI2_3V3 |
SAI0_SDI2_M0/SAI0_SDO2_M 0/DSM_AUD_RN/I2C1_SCL_M
3/UART2_RX_M1 |
GPIO7_B0_d |
3.3V |
| 25 | PDM_SDI0_3V3 | SAI0_SDI0_M0 | GPIO7_A6_d | 3.3V |
|
26 |
PDM_CLK_3V3 |
I2C4_SDA_M3
/UART2_CTSN_M1 |
GPIO7_A4_d |
3.3V |
| 27 | I2C2_SDA_3V3 | PWM0_CH5_M0 | GPIO0_D1_d | 3.3V |
| 28 | I2C2_SCL_3V3 | PWM0_CH4_M0 | GPIO0_D0_d | 3.3V |
| 29 | USB_HOST_DP | 1.8V | ||
| 30 | USB_HOST_DM | 1.8V | ||
| 31 | GND | Art | 0V | |
| 32 | OTG_DP | Tista 'tuża għat-tniżżil | 1.8V | |
| 33 | OTG_DM | Tista 'tuża għat-tniżżil | 1.8V | |
| 34 | OTG_DET(V2) | OTG VBUS DET IN | 3.3V(V2) | |
| 35 | OTG_ID | 1.8V | ||
|
36 |
SPI0_CS1n_M1 |
SAI1_MCLK_M1
/UART4_TX_M0 |
GPIO4_A3_d |
1.8V |
| 37 | VCC3V3_SYS | Input tal-Enerġija Prinċipali 3.3V | 3.3V | |
| 38 | VCC3V3_SYS | Input tal-Enerġija Prinċipali 3.3V | 3.3V | |
|
39 |
USB_CTRL_3V3 |
PWM0_CH3_M0
/UART1_CTSN_M0 |
GPIO0_C7_d |
3.3V |
| 40 | SDMMC0_DET | PWM1_CH0_M0 | GPIO0_A5_u | 3.3V(V2) |
| 41 | CLKO_32K | Ħruġ tal-arloġġ RTC | GPIO0_A2_z | 3.3V(V2) |
| 42 | nRESET | Irrisettja l-input taċ-ċavetta | 3.3V(V2) |
|
43 |
MIPI_CSI_RX0_CL
KP |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
44 |
MIPI_CSI_RX0_CL
KN |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
45 |
MIPI_CSI_RX0_D2
P |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
46 |
MIPI_CSI_RX0_D2
N |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
47 |
MIPI_CSI_RX0_D3
P |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
48 |
MIPI_CSI_RX0_D3
N |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
49 |
MIPI_CSI_RX0_D1
P |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
50 |
MIPI_CSI_RX0_D1
N |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
51 |
MIPI_CSI_RX0_D0
P |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
|
52 |
MIPI_CSI_RX0_D0
N |
MIPI CSI0 jew LVDS0 input |
1.8V |
|
| 53 | GND | Art | 0V | |
|
54 |
MIPI_CSI_RX1_D3
P |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
55 |
MIPI_CSI_RX1_D3
N |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
56 |
MIPI_CSI_RX1_CL
KP |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
57 |
MIPI_CSI_RX1_CL
KN |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
58 |
MIPI_CSI_RX1_D2
P |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
59 |
MIPI_CSI_RX1_D2
N |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
60 |
MIPI_CSI_RX1_D1
P |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
61 |
MIPI_CSI_RX1_D1
N |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
|
62 |
MIPI_CSI_RX1_D0
P |
MIPI CSI1 jew LVDS1 input |
1.8V |
|
| 63 | MIPI_CSI_RX1_D0n | MIPI CSI1 jew LVDS1 input | 1.8V | |
|
64 |
SDMMC0_D3_3V3 |
UART3_TX_M0/UART4_CTSN_
M3/JTAG_TMS_M1 |
GPIO2_A3_d |
3.3V |
|
65 |
SDMMC0_D2_3V3 |
UART3_RX_M0/UART4_RTSN_
M3/JTAG_TCK_M1 |
GPIO2_A2_d |
3.3V |
| 66 | SDMMC0_D1_3V3 | UART0_TX_M0/I2C0_SCL_M1 | GPIO2_A1_d | 3.3V |
| 67 | SDMMC0_D0_3V3 | UART0_RX_M0/I2C0_SDA_M1 | GPIO2_A0_d | 3.3V |
|
68 |
SDMMC0_CMD_3V
3 |
UART3_CTSN_M0
/UART4_TX_M3 |
GPIO2_A5_d |
3.3V |
|
69 |
SDMMC0_CLK_3V3 |
UART3_RTSN_M0
/UART4_RX_M3 |
GPIO2_A4_d |
3.3V |
| 70 | GND | Art | 0V | |
| 71 | LED1/CFG_LDO0 | Ethernet LINK LED | 3.3V | |
| 72 | LED2/CFG_LDO1 | LED VELOĊITÀ Ethernet | 3.3V | |
| 73 | MDI0 + | Sinjal Ethernet MDI | 1.8V | |
| 74 | MDI0- | Sinjal Ethernet MDI | 1.8V | |
| 75 | MDI1 + | Sinjal Ethernet MDI | 1.8V | |
| 76 | MDI1- | Sinjal Ethernet MDI | 1.8V | |
| 77 | MDI2 + | Sinjal Ethernet MDI | 1.8V | |
| 78 | MDI2- | Sinjal Ethernet MDI | 1.8V | |
| 79 | MDI3 + | Sinjal Ethernet MDI | 1.8V | |
| 80 | MDI3- | Sinjal Ethernet MDI | 1.8V | |
| 81 | I2C1_SCL_M2 | UART4_CTSN_M0 | GPIO4_A1_u | 1.8V |
| 82 | I2C1_SDA_M2 | UART4_RTSN_M0 | GPIO4_A0_u | 1.8V |
| 83 | MIPI_CSI_PWDN0 | UART4_RX_M0 | GPIO4_A2_d | 1.8V |
|
84 |
SPI0_CLK_M1 | SAI1_SDO_M1/UART5_RX_M0/
I2C4_SCL_M2 |
GPIO4_A7_d |
1.8V |
| 85 | SPI0_MOSI_M1 | SAI1_SCLK_M1/I2C3_SCL_M1 | GPIO4_A4_d | 1.8V |
|
86 |
SPI0_CS0n_M1 |
SAI1_SDI_M1/UART5_TX_M0/I
2C4_SDA_M2 |
GPIO4_A6_d |
1.8V |
| 87 | SPI0_MISO_M1 | SAI1_LRCK_M1/I2C3_SDA_M1 | GPIO4_A5_d | 1.8V |
| 88 | MIPI_CSI_CLK1 | UART5_RTSn_M0 | GPIO4_B0_d | 1.8V |
| 89 | MIPI_CSI_CLK0 | UART5_CTSn_M0 | GPIO4_B1_d | 1.8V |
| 90 | GND | Art | 0V | |
|
91 |
LCDC_D0_3V3 |
VI_CIF_D0_M1/PWM2_CH4_M
0/UART4_RTSN_M1 |
GPIO5_A0_d |
3.3V |
|
92 |
LCDC_D1_3V3 |
I2C5_SCL_M2/VI_CIF_D1_M1/
SAI2_SDI2_M1/PWM2_CH5_M 0/UART4_CTSN_M1 |
GPIO5_A1_d |
3.3V |
|
93 |
LCDC_D2_3V3 |
VI_CIF_D2_M1/SAI2_SDI1_M1/ PWM0_CH5_M2/UART4_TX_M
1 |
GPIO5_A2_d |
3.3V |
|
94 |
LCDC_D3_3V3 |
SPI0_CSN0_M2/SAI2_MCLK_M 1/PWM0_CH4_M2/UART4_RX_
M1 |
GPIO5_A3_d |
3.3V |
|
95 |
LCDC_D4_3V3 |
SPI0_MOSI_M2/SAI2_SDO_M1
/PWM0_CH3_M1/UART5TX_M1 |
GPIO5_A4_d |
3.3V |
|
96 |
LCDC_D5_3V3 |
SPI0_MISO_M2/SAI2_SCLK_M 1/PWM0_CH2_M1/UART5_RX_
M1 |
GPIO5_A5_d |
3.3V |
|
97 |
LCDC_D6_3V3 |
SPI0_CLK_M2/SAI2_SDI0_M1/ PWM0_CH1_M1/UART5_RTSN
_M1 |
GPIO5_A6_d |
3.3V |
|
98 |
LCDC_D7_3V3 |
SPI0_CSN1_M2/VI_CIF_D3_M1
/SAI2_LRCK_M1/I2C5_SDA_M 2/PWM0_CH0_M1/UART5_CTS N_M1 |
GPIO5_A7_d |
3.3V |
|
99 |
CAN_RX_3V3 |
SPI1_CSN1_M2/I2C2_SCL_M1/
PWM0_CH7_M2/UART3TX_M1 |
GPIO5_D4_u |
3.3V |
|
100 |
CAN_TX_3V3 |
I2C2_SDA_M1/PWM1_CH3_M1
/UART3_RX_M1 |
GPIO5_D5_u |
3.3V |
|
101 |
LCDC_CLK_3V3 |
SPI1_MISO_M2/PWM1_CH0_M
1/UART3_CTSN_M1 |
GPIO5_D3_d |
3.3V |
|
102 |
LCDC_VSYNC_3V3 |
SPI1_MOSI_M2/PWM1_CH1_M
1/UART3_RTSN_M1 |
GPIO5_D2_d |
3.3V |
| 103 | MIPI_DSI_D2P | 1.8V | ||
| 104 | MIPI_DSI_D2N | 1.8V | ||
| 105 | MIPI_DSI_D1P | 1.8V | ||
| 106 | MIPI_DSI_D1N | 1.8V | ||
| 107 | MIPI_DSI_D0P | 1.8V | ||
| 108 | MIPI_DSI_D0N | 1.8V | ||
| 109 | MIPI_DSI_D3P | 1.8V | ||
| 110 | MIPI_DSI_D3N | 1.8V | ||
| 111 | MIPI_DSI_CLKP | 1.8V | ||
| 112 | MIPI_DSI_CLKN | 1.8V | ||
| 113 | ADCIN3 | Input ADC | 1.8V | |
| 114 | ADCIN2 | Input ADC | 1.8V | |
| 115 | ADCIN1 | Input ADC | 1.8V | |
| 116 | ADKEY_IN0 | Modalità ta' rkupru ssettjata (PU 10K) | 1.8V | |
| 117 | GND | Art | 0V | |
| 118 | SDIO_CLK | GPIO3_A0_d | 3.3V(V2) | |
| 119 | SDIO_CMD | GPIO3_A1_d | 3.3V(V2) | |
| 120 | SDIO_D0 | I2C1_SCL_M1 | GPIO3_A2_d | 3.3V(V2) |
| 121 | SDIO_D1 | I2C1_SDA_M1 | GPIO3_A3_d | 3.3V(V2) |
| 122 | SDIO_D2 | GPIO3_A4_d | 3.3V(V2) | |
| 123 | SDIO_D3 | GPIO3_A5_d | 3.3V(V2) | |
| 124 | UART0_RX | GPIO3_B0_d | 3.3V(V2) |
| 125 | UART0_TX | SAI2_SDI2_M0 | GPIO3_B1_d | 3.3V(V2) |
| 126 | UART0_CTSN | GPIO3_A7_d | 3.3V(V2) | |
| 127 | UART0_RTSN | GPIO3_A6_d | 3.3V(V2) | |
|
128 |
PCM_TX |
SPI1_MOSI_M1/SAI2_SDO_M0
/PWM2_CH0_M0 |
GPIO3_B2_d |
3.3V(V2) |
|
129 |
PCM_SYNC |
SPI1_CSN0_M1/SAI2_LRCK_M
0/PWM2_CH3_M0/UART1_CTS N_M1/I2C4_SDA_M0 |
GPIO3_B5_d |
3.3V(V2) |
|
130 |
PCM_CLK |
SPI1_CLK_M1/SAI2_SCLK_M0/ PWM2_CH2_M0/UART1_RTSN
_M1/I2C4_SCL_M0 |
GPIO3_B4_d |
3.3V(V2) |
|
131 |
PCM_RX |
SPI1_MISO_M1/SAI2_SDI0_M0
/PWM2_CH1_M0 |
GPIO3_B3_d |
3.3V(V2) |
|
132 |
LCDC_D15_3V3 |
VI_CIF_D11_M1/PWM2_CH3_
M1/UART7_CTSN_M0 |
GPIO5_B7_d |
3.3V |
|
133 |
LCDC_D14_3V3 |
VI_CIF_D10_M1/PWM2_CH2_
M1/UART7_RTSN_M0 |
GPIO5_B6_d |
3.3V |
| 134 | LCDC_D13_3V3 | VI_CIF_D9_M1/UART7_RX_M0 | GPIO5_B5_d | 3.3V |
| 135 | LCDC_D12_3V3 | VI_CIF_D8_M1/UART7_TX_M0 | GPIO5_B4_d | 3.3V |
|
136 |
LCDC_DEN_3V3 |
SPI1_CSN0_M2/I2C3_SCL_M2/
PWM0_CH6_M2 |
GPIO5_D0_d |
3.3V |
|
137 |
LCDC_D10_3V3 |
VI_CIF_D6_M1/PWM2_CH0_M
1/UART6_RTSN_M0 |
GPIO5_B2_d |
3.3V |
| 138 | LCDC_D9_3V3 | VI_CIF_D5_M1/UART6_RX_M0 | GPIO5_B1_d | 3.3V |
| 139 | LCDC_D8_3V3 | VI_CIF_D4_M1/UART6_TX_M0 | GPIO5_B0_d | 3.3V |
|
140 |
LCDC_D11_3V3 |
VI_CIF_D7_M1/PWM2_CH1_M
1/UART6_CTSN_M0 |
GPIO5_B3_d |
3.3V |
|
141 |
LCDC_HSYNC_3V3 |
SPI1_CLK_M2/I2C3_SDA_M2/P
WM1_CH2_M1 |
GPIO5_D1_d |
3.3V |
|
142 |
LCDC_D16_3V3 |
VI_CIF_D12_M1
/PWM3_CH0_M1 |
GPIO5_C0_d |
3.3V |
|
143 |
LCDC_D17_3V3 |
VI_CIF_D13_M1
/PWM3_CH1_M1 |
GPIO5_C1_d |
3.3V |
|
144 |
LCDC_D18_3V3 |
VI_CIF_D14_M1
/PWM3_CH2_M1 |
GPIO5_C2_d |
3.3V |
| Nota:
1. Ħafna GPIO voltage huwa 1.8V, iżda xi pinnijiet immarkati 3.3V. 2. Volum GPIOtagIbdel għal 3.3V għal immarkat (V2). |
||||
Kit tal-Iżvilupp (Idea1126B-P)
Gwida tad-Disinn tal-Hardware
Referenza Ċirkwit Periferali
Ċirkwit tal-Enerġija Prinċipali
Ċirkwit tad-debug
Ċirkwit tal-Interface USB OTG
Footprint tal-PCB
Karatteristiċi Elettriku tal-Prodott
Dissipazzjoni u Temperatura
| Simbolu | Parametru | Min | Tip | Max | Unità |
|
VCC3V3_SYS |
Sistema IO
Voltage |
3.3-5% |
3.3 |
3.3 + 5% |
V |
|
Isys_in |
VCC3V3_SYS
input Kurrent |
850 |
mA |
||
|
Ta |
Temperatura operattiva |
-20 |
70 |
°C |
|
|
Tstg |
Temperatura tal-Ħażna |
-40 |
85 |
°C |
Affidabilità tat-Test
| Test Operattiv b'Temperatura Għolja | ||
| Kontenut | Jopera 8h f'temperatura għolja | 55°C±2°C |
| Riżultat | TBD | |
| Test tal-Ħajja Operattiva | ||
| Kontenut | Jopera fil-kamra | 120h |
| Riżultat | TBD | |
FAQs
Can I change the GPIO voltage for the signal and WIFI/BT module to 3.3V?
Yes, the signal and WIFI/BT module's GPIO voltage can be changed to 3.3V as mentioned in the manual.
Dokumenti / Riżorsi
 |
Boardcon Embedded Design CM1126B-P Embedded Design System [pdfManwal tal-Utent V2.20250422, CM1126B-P Embedded Design, CM1126B-P, Embedded Design, Design |