VEVOR 20 Inch Wall Mount Fan

VEVOR 20 Inch Oscillating Wall Mount Fan Instruction Manual

Model: 20 Inch Wall Mount Fan

Introduzzjoni

Thank you for choosing the VEVOR 20 Inch Oscillating Wall Mount Fan. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your fan. Please read all instructions carefully before use and retain this manual for future reference.

Istruzzjonijiet tas-Sigurtà

  • Always ensure the fan is securely mounted to a solid wall surface before operation.
  • Tħaddimx il-fann b'korda jew plagg bil-ħsara. Jekk il-korda tkun bil-ħsara, trid tiġi sostitwita mill-manifattur, mill-aġent tas-servizz tiegħu, jew minn persuni kwalifikati bl-istess mod biex jiġi evitat periklu.
  • Żomm subgħajk, xagħar, u ħwejjeġ maħlula 'l bogħod mix-xfafar tal-fann waqt it-tħaddim.
  • Tużax il-fann f'żoni fejn jinħażnu likwidi jew gassijiet fjammabbli.
  • Skonnettja l-fann mis-sokit tal-enerġija qabel ma tnaddaf jew tagħmel xi manutenzjoni.
  • This fan is designed for both indoor and outdoor use, but avoid direct exposure to heavy rain or extreme weather conditions unless specified for waterproof models.
  • Żgura li s-sors tal-enerġija jaqbel mal-voltagRekwiżiti e tal-fann (115 Volts).

Kontenut tal-Pakkett

Meta tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma preżenti u mhux imħassra:

  • 1 x Industrial Wall Fan
  • 1 x Manwal għall-Utent
  • Mounting Hardware (screws, anchors, bracket)

Setup u Installazzjoni

The VEVOR 20 Inch Wall Mount Fan is designed for easy installation on any solid wall. Follow these steps for secure mounting:

  1. Agħżel Post: Select a solid wall surface capable of supporting the fan's weight (approximately 11.2 pounds). Consider areas like patios, garages, workshops, or basements for optimal airflow.
  2. Immarka l-Punti tat-Tħaffir: Position the mounting bracket against the wall at the desired height. Use a pencil to mark the locations for drilling the anchor holes. Ensure the bracket is level before marking.
  3. Drill toqob: Using an appropriate drill bit for your wall material (e.g., masonry bit for concrete/brick), drill holes at the marked points. Insert the provided wall anchors into the drilled holes.
  4. Waħħal il-parentesi tal-immuntar: Align the mounting bracket with the installed anchors. Secure the bracket to the wall using the provided screws. Ensure all screws are tightened firmly for stability.
  5. Waħħal il-Fann mal-Bracket: Carefully lift the fan and align its mounting points with the bracket. Secure the fan to the bracket using the provided bolts, washers, and nuts. Tighten securely, allowing for vertical tilt adjustment.
  6. Qabbad l-Enerġija: Plug the fan's 4.92 ft / 1.5 m power cord into a compatible 115V electrical outlet.
VEVOR 20 inch wall mount fan installed in various settings like a gym, patio, garage, and deck.
Figure 1: The VEVOR 20 inch wall mount fan can be installed in various locations such as a gym, patio, garage, or deck, providing versatile cooling solutions.
VEVOR 20 inch wall mount fan installed in a garage, mounted high on the wall.
Figure 2: A VEVOR 20 inch wall mount fan is shown installed high on a garage wall, demonstrating its space-saving design and effective air distribution.
Close-up view of the VEVOR 20 inch wall mount fan and its mounting bracket.
Figura 3: Dettaljata view of the VEVOR 20 inch wall mount fan, highlighting its robust construction and the secure mounting bracket.
Video 1: This official seller video demonstrates the powerful cooling capabilities and features of the 20 inch VEVOR Wall Mount Fan, showcasing its suitability for various spaces.

Istruzzjonijiet Operattivi

Your VEVOR wall mount fan offers multiple settings for customized comfort:

  • Power On/Off: The fan is operated using a pull chain switch. Pull the chain once to turn the fan on to its lowest speed.
  • Settings tal-veloċità: The fan features 3-speed settings. Pull the chain repeatedly to cycle through Low, Medium, and High speeds. Pulling it again after High will turn the fan off.
  • Funzjoni ta 'Oxxillazzjoni: The fan provides a 90-degree oscillating function to cover a wide area. This function is typically controlled by a separate pull chain or a switch on the motor housing. Refer to the specific control mechanism on your fan to activate or deactivate oscillation.
  • Aġġustament tal-inklinazzjoni: The fan head can be tilted vertically to direct airflow precisely where needed. Loosen the adjustment knob on the side of the fan housing, set the desired angle, and then tighten the knob to secure it.
Illustration of the VEVOR 20 inch wall mount fan's 3 speed settings with CFM values.
Figure 4: This image illustrates the three distinct speed settings of the VEVOR fan: Low (3500 CFM), Medium (4000 CFM), and High (4650 CFM), highlighting the aluminum fan blades.
Diagram showing the 90-degree left and right oscillation and 30-degree manual tilt adjustment of the VEVOR wall mount fan.
Figure 5: A diagram detailing the fan's wide-angle oscillation (90-degree left and right) and its 30-degree manual tilt adjustment, allowing for comprehensive air coverage.
Intern view of the VEVOR fan motor and blades, emphasizing its quiet operation and powerful airflow.
Figura 6: Intern view wirjaasing the fan's double ball bearings, all-metal casing, ETL listing, and copper motor, contributing to its powerful yet quiet operation and 30 ft air supply.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your VEVOR fan:

  • Tindif: The fan features aluminum blades and a rugged metal construction designed for easy disassembly and cleaning. Periodically wipe down the fan blades and grille with a soft, damp cloth to remove dust and debris. Ensure the fan is unplugged before cleaning.
  • Mutur: The motor is fully sealed and requires no lubrication. Do not attempt to open the motor housing.
  • Ħażna: If storing the fan for an extended period, clean it thoroughly, cover it to protect from dust, and store it in a dry location.

Issolvi l-problemi

If you encounter issues with your fan, refer to the following common troubleshooting steps:

ProblemaKawża PossibbliSoluzzjoni
Il-fann ma jixgħelxEbda provvista ta 'enerġija
Pull chain not activated
Check if the fan is plugged in and the outlet is functional.
Pull the chain firmly to cycle through speeds.
Fluss ta 'arja baxxFan blades are dirty
Fan is on a low speed setting
Unplug and clean the fan blades and grille.
Increase the fan speed using the pull chain.
Il-fann huwa storbjużPartijiet sfużi
Fan blades are dirty
Unplug and check for any loose screws or components. Tighten if necessary.
Unplug and clean the fan blades.
L-oxxillazzjoni ma taħdimxOscillation function is offActivate the oscillation function using its dedicated control (pull chain or switch).

Speċifikazzjonijiet

Key technical specifications for your VEVOR 20 Inch Wall Mount Fan:

KaratteristikaSpeċifikazzjoni
BrandVEVOR
Isem tal-MudellWall Mount Fan, 20 Inch
Daqs20 Pulzier
KulurIswed
StilJossillaba
Sors tal-EnerġijaCorded Elettriku
Voltage115 Volts
Wattage70 watt
Kapaċità tal-Fluss tal-AjruMax. 4650 CFM
Veloċità1450 RPM
Numru ta 'Livelli ta' Qawwa3
Livell ta' Storbju55 Deċibel
Dimensjonijiet tal-Prodott26"D x 22.2"W x 27.2"H
Piż tal-oġġett11.2 Liri
Tul tal-kurdun4.92 pied / 1.5 m
MaterjalAll Metal (Aluminum Blades)
Użu fuq ġewwa/barraĠewwa, Barra
ĊertifikazzjoniETL Elenkat
Detailed dimensions and specifications of the VEVOR 20 inch wall mount fan.
Figure 7: This graphic provides a visual overview of the fan's dimensions and key specifications, including air speed, air volume, IP rating, power, voltage, speed, cover area, noise level, cord length, and weight.

Garanzija u Appoġġ

VEVOR products are designed for durability and performance. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided on the VEVOR official website or your purchase documentation. Our customer service team is available to assist you.

Żur il-Ħanut VEVOR: Ħanut VEVOR fuq Amazon

Dokumenti Relatati - 20 Inch Wall Mount Fan

Preview VEVOR Metal Wall Fan User Manual BT-WL18B / WF-18-EWP
User manual and technical guide for the VEVOR Metal Wall Fan, models BT-WL18B and WF-18-EWP. Includes safety instructions, installation, operation, maintenance, and troubleshooting.
Preview Manwal tat-Tħaddim tal-Pompa tal-Vakwu VEVOR KQ-1K - Karatteristiċi, Sigurtà, u Manutenzjoni
Manwal komprensiv tat-tħaddim għall-Pompa tal-Vakwu VEVOR KQ-1K. Ikopri l-karatteristiċi, l-ispeċifikazzjonijiet, il-prekawzjonijiet ta' sigurtà, l-installazzjoni, is-setup, il-manutenzjoni, u s-soluzzjoni tal-problemi għal professjonisti u utenti DIY.
Preview VEVOR EM2245B Handheld Anemometer Instruction Manual - Wind Speed, Air Flow, Temperature Measurement
Comprehensive instruction manual for the VEVOR EM2245B handheld anemometer. Learn how to measure wind velocity, air flow, temperature, and wind chill. Includes operation, specifications, and troubleshooting.
Preview Manwal tal-Utent tax-Xafra tas-Serra Oxxillanti VEVOR QH-03
User manual for the VEVOR QH-03 Oscillating Saw Blade. This guide provides essential information on assembly, safety precautions, product parameters, and accessory use for the VEVOR QH-03 oscillating saw blade, made from durable tungsten steel for cutting wood, plastic, nails, and soft metal.
Preview VEVOR HS-608C Countertop Blender User Manual
User manual for the VEVOR HS-608C Countertop Blender, providing operating instructions, safety guidelines, cleaning and maintenance tips, and troubleshooting advice.
Preview VEVOR HS-608C Countertop Blender User Manual and Safety Guide
Comprehensive user manual for the VEVOR HS-608C Countertop Blender, covering operation, safety instructions, maintenance, and troubleshooting. Includes product specifications and compliance information.