Introduzzjoni
Thank you for choosing the iHome AutoVac Halo Robot Vacuum and Mop Combo. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
X'inhu Inkluż
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- iHome AutoVac Halo Robot Vacuum
- Bażi Awto-Volja
- Pads tal-mopp
- Replacement Side Brush
- PowerMop Attachment
- Għodda tat-Tindif tal-Pinzell
- Filtru HEPA ta 'Sostituzzjoni
- Kontroll mill-bogħod
- Borża tat-Trab
- Kejbil tal-Enerġija

Image: All components of the iHome AutoVac Halo, including the robot vacuum, auto-empty base, mop pads, side brush, PowerMop attachment, cleaning tool, HEPA filter, remote control, dust bag, and power cable.
Gwida ta' Setup
1. Prepare the Robot Vacuum
- Remove any protective film from the robot's surface.
- Remove and discard any bumper guards or packing materials.

Immaġni: Fuq view of the iHome AutoVac Halo Robot Vacuum, showing its clean, minimalist design.
2. Place the Auto-Empty Base
Choose an ideal location for the auto-empty base:
- Ħdejn żbokk tal-elettriku.
- Away from obstructions (ensure at least 2 feet on either side and 5 feet in front).
- In an area with a strong Wi-Fi signal.

Image: The iHome AutoVac Halo Robot Vacuum docked with its auto-empty base, illustrating proper placement.
3. Iċċarġjar Inizjali
Connect the power cable to the auto-empty base and plug it into an outlet. Place the AutoVac Halo onto the base. The robot's LED indicators will light up. Allow the robot to fully charge before its first cleaning cycle (up to 5 hours). The LED will turn solid green when charging is complete.
Video: Demonstrates the initial setup and charging process for the iHome AutoVac Halo, including connecting the base and docking the robot.
4. Connect to Wi-Fi and App Setup
Download the "iHome Clean" app from your device's app store. Follow the in-app instructions to connect your AutoVac Halo to your home Wi-Fi network and add it as a device. This enables smart mapping, scheduling, and remote control features.

Image: Screenshot of the iHome Clean app displaying a mapped floor plan, illustrating the smart mapping capabilities.
Istruzzjonijiet Operattivi
1. Preparing Your Home for Cleaning
Before starting a cleaning cycle, ensure the area is free of small objects, loose cables, and anything that could obstruct the robot or get tangled in its brushes. This helps prevent the robot from getting stuck and ensures efficient cleaning.
2. Tibda Ċiklu ta' Tindif
Tista' tibda ċiklu ta' tindif b'diversi modi:
- Fuq l-Apparat: Press the Power button on the robot.
- Kontroll mill-bogħod: Use the provided remote control to start/stop cleaning.
- iHome Clean App: Use the app for advanced control, including auto-clean, region cleaning, area cleaning, and spot cleaning.
- Kontroll tal-Vuċi: Connect to Amazon Echo or Google Home for voice commands.

Image: The iHome AutoVac Halo actively cleaning a hard floor, demonstrating its operation.
3. Mappatura u Navigazzjoni Intelliġenti
The AutoVac Halo uses LiDAR Visual Navigation Technology to map your home. During its first few runs, it will create a detailed floor plan. This map allows for efficient, systematic cleaning and enables features like:
- Virtual Boundaries: Set "No-Go Zones" or "No-Mop Zones" via the app to restrict cleaning in specific areas.
- Tindif Skedat: Schedule cleaning for specific rooms or times.
- Traċċar f'ħin reali: Monitor the robot's progress and location on the map in the app.

Image: The iHome AutoVac Halo navigating a room, with virtual boundaries (No-Go Zone, No-Mop Zone) overlaid on a floor plan.
4. Vacuum and Mop Functions
The AutoVac Halo offers both vacuuming and mopping capabilities. It is suitable for hardwood floors, tile, and low-pile carpets. For mopping, attach the PowerMop attachment and fill the water tank (if applicable, specific instructions for mop attachment are in the full manual). Adjust suction and mop settings via the app.

Image: The iHome AutoVac Halo demonstrating its mopping function on a hard floor, leaving a clean path.
Manutenzjoni
Regular maintenance ensures optimal performance and extends the lifespan of your AutoVac Halo.
1. Auto-Empty Base Dust Bag
The auto-empty base automatically transfers dirt from the robot's dustbin into a disposable dust bag. Replace the dust bag when the indicator light on the base signals it is full, or approximately every 30-60 days depending on usage.

Image: A hand removing a full dust bag from the iHome Auto-Empty Base, ready for disposal.
2. Robot Dustbin and Filter
Although the base self-empties, periodically check and clean the robot's internal dustbin and HEPA filter. Tap out loose debris and rinse the filter under running water (ensure it's completely dry before re-inserting). Replace the HEPA filter every 3-6 months.
3. Brushes and Wheels
Regularly inspect and clean the main brush, side brushes, and wheels. Use the provided cleaning tool to remove tangled hair or debris. Replace worn-out side brushes as needed.
4. Kuxxinetti tal-Mopp
After each mopping cycle, remove and clean the mop pads. They can be hand-washed or machine-washed. Ensure they are dry before reattaching.
Issolvi l-problemi
If you encounter issues with your iHome AutoVac Halo, refer to the following common solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Robot mhux jiċċarġja | Not properly docked; power cable loose; charging contacts dirty. | Ensure robot is correctly aligned on the base. Check power cable connection. Clean charging contacts on both robot and base. |
| Ir-robot jeħel spiss | Loose cables, small objects, or thick carpets. | Clear the cleaning area of obstructions. Use virtual boundaries in the app for problem areas. |
| Prestazzjoni fqira tat-tindif | Full dustbin/dust bag; clogged filter; worn brushes. | Empty dustbin/replace dust bag. Clean or replace filter. Clean or replace brushes. |
| Kwistjonijiet ta 'konnessjoni Wi-Fi | Weak Wi-Fi signal; incorrect network password; router issues. | Ensure strong Wi-Fi signal near the base. Re-enter Wi-Fi credentials in the app. Restart your router. |
| Main Wheel Error | Debris caught in wheels; wheel malfunction. | Check wheels for obstructions and clean them. If the error persists, contact customer support. |
Speċifikazzjonijiet
- Ditta: iHome
- Isem tal-Mudell: iHRV7
- Karatteristiċi Speċjali: LiDAR Navigation, Self-Emptying, Smart Mapping
- Kulur: Abjad
- Tip ta' filtru: Skartoċċ
- Ħajja tal-batterija: Sa 3-il Siegħa
- Sors tal-Enerġija: Mħaddma bil-batterija
- Batteriji: 1 batterija tal-jone tal-litju meħtieġa (inkluża)
- Metodu ta' Kontroll: Vuċi, App, Remot
- Apparati Kompatibbli: Amazon Echo, Google Home
- Fattur tal-Formola: Robotika
- UPC: 860004017271
- Dimensjonijiet tal-Prodott: 13 x 13 x 4 pulzieri
- Piż tal-oġġett: 5 liri
- Rakkomandazzjoni tal-wiċċ: Hardwood floors, tile, low-pile carpets
Garanzija u Appoġġ
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official iHome websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.
Appoġġ onlajn: www.ihome.com/support
Dokumenti Relatati - iHRV7
![]() |
Manwal tal-Utent tar-Robot Vacuum and Mop tas-Serje Eclipse tal-iHome AUTOVAC Dan il-manwal tal-utent jipprovdi struzzjonijiet komprensivi għall-iHome AUTOVAC Eclipse Series 2-in-1 Robot Vacuum and Mop, li jkopri s-setup, it-tħaddim, is-sigurtà, il-konnettività tal-app, u l-manutenzjoni għal tindif effiċjenti tad-dar. |
![]() |
iHome Autovac Halo IHRV7 Gwida tas-Sid Gwida għas-sid għall-iHome Autovac Halo robot vacuum cleaner, mudell IHRV7. Tinkludi struzzjonijiet dwar is-sigurtà, tagħrif dwar il-prodottview, is-setup, l-użu, il-manutenzjoni, is-soluzzjoni tal-problemi, u informazzjoni dwar l-FCC. |
![]() |
iHome AUTOVAC NOVA S1 PRO Owner's Guide: Setup, Maintenance, and Troubleshooting Comprehensive owner's guide for the iHome AUTOVAC NOVA S1 PRO robot vacuum. Learn about setup, app usage, maintenance, troubleshooting, and warranty information for your iHome cleaning device. |
![]() |
iHome Autovac Eclipse iHRV2 Owner's Guide: Setup, Operation, and Maintenance Comprehensive owner's guide for the iHome Autovac Eclipse robot vacuum cleaner (Model iHRV2). Learn how to set up, use, maintain, and troubleshoot your device. Includes product overview, cleaning modes, app connection, safety instructions, and FCC statement. |
![]() |
Gwida tas-Sid tal-iHome AutoVac Juno Robot Vacuum Cleaner (Mudell iHRV9) Gwida għas-sid għall-iHome AutoVac Juno robot vacuum cleaner (Mudell iHRV9), li tipprovdi struzzjonijiet dettaljati dwar is-setup, it-tħaddim, il-manutenzjoni, is-soluzzjoni tal-problemi, u informazzjoni dwar il-garanzija. |
![]() |
iHome Autovac Nova (Model iHRV6) Owner's Guide Comprehensive owner's guide for the iHome Autovac Nova (Model iHRV6) robotic vacuum cleaner, covering setup, operation, maintenance, and troubleshooting. |





