Manwal tal-Istruzzjonijiet tas-Subwoofer JBL 12SWMS350

Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your JBL 12SWMS350 12-inch subwoofer. The JBL Multisystem line is recognized for its performance and durability, designed for integration into original car audio systems to deliver quality sound.

The JBL 12SWMS350 is a 12-inch subwoofer with 350W RMS power, designed to enhance the low-frequency audio experience in your vehicle.

Informazzjoni dwar is-Sigurtà

Dejjem skonnettja l-batterija tal-vettura qabel ma tagħmel xi xogħol elettriku.
Kun żgur li l-wajers kollha huma iżolati sew biex tevita short circuits.
Immonta s-subwoofer sew biex tevita li jiċċaqlaq waqt it-tħaddim tal-vettura.
Ikkonsulta installatur professjonali tal-awdjo tal-karozzi jekk m'intix ċert dwar xi passi tal-installazzjoni.

Setup u Installazzjoni

Proper installation is crucial for optimal performance and longevity of your subwoofer. It is recommended that installation be performed by a qualified professional.

Immuntar tas-Subwoofer

The JBL 12SWMS350 is designed for flush mounting. Ensure the mounting location provides adequate clearance for the subwoofer's depth and allows for proper air circulation around the magnet structure.

Choose a sturdy, flat surface for mounting, typically within an enclosure.
Cut an appropriate size hole for the subwoofer (refer to specifications for cutout diameter).
Secure the subwoofer using appropriate screws, ensuring an airtight seal if installed in a sealed enclosure.

Immaġni: Ġenb view of the JBL 12SWMS350 subwoofer, showing the cone and surround. This view helps in understanding the depth required for mounting.

Konnessjonijiet tal-Wiring

The subwoofer features terminals for connecting to an amplifier. Pay close attention to polarity to ensure correct phase and optimal sound performance.

Qabbad it-terminal pożittiv (+) tas-subwoofer mal-output pożittiv (+) tal-apparat tiegħek ampaktar ħaj.
Qabbad it-terminal negattiv (-) tas-subwoofer mal-output negattiv (-) tal-apparat tiegħek ampaktar ħaj.
Ensure all connections are secure and free from corrosion. The subwoofer has a 4 Ohm impedance. Verify your amplifier is stable at this impedance.

Immaġni: Wara view of the JBL 12SWMS350 subwoofer, highlighting the speaker terminals for wiring connections. Note the positive and negative markings.

Istruzzjonijiet Operattivi

Once installed, proper tuning of your amplifier and head unit settings will maximize the subwoofer's performance.

L-issettjar tal-gwadann: Aġġusta l- amplifier's gain control to match the output voltage of your head unit. Start with the gain at minimum and slowly increase it until the desired volume is achieved without distortion.
Frekwenza Crossover: Issettja l-filtru low-pass (LPF) fuq tiegħek amplifier or head unit. A common starting point is between 80 Hz and 100 Hz. This ensures the subwoofer only reproduces low frequencies.
Kontroll tal-Fażi: Jekk tiegħek amplifier has a phase switch (0°/180°), experiment with both settings to determine which provides the most impactful bass response in your vehicle.
Spinta baxxa: Use bass boost sparingly, if at all, as excessive boosting can lead to distortion and potential damage to the subwoofer.

Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura l-lonġevità u l-prestazzjoni tas-subwoofer tiegħek.

Tindif: Use a soft, dry cloth to gently wipe down the cone and surround. Avoid using harsh chemicals or excessive moisture.
Spezzjoni: Periodically check the subwoofer for any signs of damage, such as tears in the cone or surround, or loose connections.
Ambjent: Ensure the subwoofer is not exposed to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

Issolvi l-problemi

If you experience issues with your JBL 12SWMS350 subwoofer, refer to the following common troubleshooting steps:

Problema	Kawża Possibbli	Soluzzjoni
Ebda Ħoss	Wajers maħlula jew mhux korretti. AmpL-alimentatur mhux mixgħul jew fil-modalità ta' protezzjoni. Head unit output issues.	Check all wiring connections for proper polarity and security. Ivverifika amplifier power, ground, and remote turn-on connections. Check ampfjusijiet tal-lifer. Test head unit with another speaker or source.
Ħoss Mgħawġ	AmpIl-qligħ tal-lifier huwa ssettjat għoli wisq. Crossover frequency set incorrectly. Subwoofer bil-ħsara.	Naqqas ampgwadann lifier. Adjust LPF to a suitable frequency (e.g., 80-100 Hz). Spezzjona s-subwoofer għal ħsara fiżika.
Weak or No Bass	Issettjar tal-fażi mhux korrett. Low-pass filter set too high or too low. Subwoofer enclosure issues.	Ixgħel is-swiċċ tal-fażi (0°/180°) ampaktar ħaj. Adjust LPF. Ensure enclosure is properly sealed and sized for the subwoofer.

If these steps do not resolve the issue, contact JBL customer support or your authorized dealer.

Speċifikazzjonijiet

Karatteristika	Dettall
Brand	JBL
Mudell	12SWMS350
Tip ta' Kelliem	Subwoofer
Dijametru tas-Subwoofer	12 Pulzier
Qawwa RMS	350 Watts
Qawwa massima tal-Ħruġ	700 Watts
Impedenza	4 Ohms
Dimensjonijiet tal-Prodott (Fond x Wisa' x Għoli)	14.5 ċm x 31 ċm x 31 ċm (madwar 5.7 x 12.2 x 12.2 pulzieri)
Piż tal-Prodott	4 Kilogrammi (madwar 8.8 lbs)
Komponenti Inklużi	12-inch Speaker
Metodu ta' Kontroll	Touch (refers to system control, not direct subwoofer control)
Sors tal-Enerġija	AC/DC (refers to amplifier power, not subwoofer directly)
Waterproof	Nru

Informazzjoni dwar Garanzija

The JBL 12SWMS350 subwoofer comes with a limited warranty. Specific terms and duration of the warranty may vary by region and retailer.

Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation provided with your purchase or contact JBL customer support.

Extended warranty options may be available through your retailer at the time of purchase.

Appoġġ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact JBL customer support or your authorized JBL dealer.

You can also visit the official JBL store for more product information and support resources: Ħanut Uffiċjali tal-JBL

	Manwal tas-Sid u Speċifikazzjonijiet Tekniċi tas-Subwoofer JBL Arena X Manwal tas-sid u speċifikazzjonijiet tekniċi għas-subwoofer JBL Arena X ta' 12-il pulzier, li jiddettaljaw it-tipi ta' kabinetti, l-installazzjoni, u l-parametri tal-prestazzjoni.
	JBL STAGE 1220B Kaxxa tas-Subwoofer Doppja ta' 12": Manwal tas-Sid u Speċifikazzjonijiet Manwal dettaljat tas-sid u speċifikazzjonijiet għall-JBL STAGKaxxa tas-subwoofer doppja ta' 12-il pulzier E 1220B. Tgħallem dwar l-installazzjoni, il-karatteristiċi, l-ispeċifikazzjonijiet tekniċi, il-kura, is-sigurtà, u l-garanzija għal dan il-prodott awdjo tal-karozza ta' prestazzjoni għolja.
	Manwal tas-Sid tal-JBL BassPro Nano: Sistema ta' Subwoofer Ultra-Kompatta li Tħaddem taħt is-Sedil Manwal dettaljat tas-sid għall-JBL BassPro Nano, sistema ta' subwoofer ultra-kompatta li titqiegħed taħt is-sedil. Tgħallem dwar l-installazzjoni, il-wajers, il-karatteristiċi, l-ispeċifikazzjonijiet, u s-soluzzjoni tal-problemi għas-subwoofer tal-awdjo tal-karozza JBL tiegħek.
	Manwal tas-Servizz tas-Subwoofer Imħaddem tas-Serje JBL PB12 PowerBass Manwal komprensiv tas-servizz għas-subwoofer powered tas-Serje JBL PB12 PowerBass, li jagħti dettalji dwar l-ispeċifikazzjonijiet, is-soluzzjoni tal-problemi, il-proċeduri tal-ittestjar, il-listi tal-partijiet, u l-iskematiċi.
	Gwida għall-Bidu Mgħaġġel tas-Subwoofer Powered JBL L10CS ta' 10 pulzieri (250mm) 250W RMS Gwida ta' bidu rapidu għas-subwoofer JBL L10CS ta' 10 pulzieri (250mm) 250W RMS li tkopri s-setup, it-tqegħid, il-konnessjonijiet, il-kontrolli u l-ispeċifikazzjonijiet.
	JBL Arena SUB 100P Subwoofer Attiv ta' 250mm (10 pulzieri) - Prodott Fuqview Informazzjoni dettaljata dwar il-prodott għas-subwoofer attiv JBL Arena SUB 100P, li fih woofer ta' 250mm (10 pulzieri), 100W RMS amplifer, portijiet doppji li jaqbdu minn wara, u disinn modern. Jinkludi speċifikazzjonijiet, karatteristiċi, u x'hemm fil-kaxxa.

JBL 12SWMS350