1. Introduzzjoni
This manual provides detailed instructions for the assembly, operation, and maintenance of your FITUEYES Universal TV Stand, Model TT105202GB. Please read this manual thoroughly before installation to ensure correct setup and safe usage. Keep this manual for future reference.
Figura 1.1: Quddiem view of the FITUEYES Universal TV Stand.
2. Informazzjoni dwar is-Sigurtà
- Kapaċità tal-piż: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Daqs tat-TV: This stand is designed for TVs between 32 and 65 inches. Ensure your TV falls within this range.
- Kompatibbiltà VESA: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) is compatible with the stand's range (200x200mm to 600x400mm).
- Assemblea: Assemble the stand exactly as instructed. Incorrect assembly can lead to instability and potential hazards.
- Stabbiltà: Ensure the stand is placed on a stable, level surface. Avoid placing it on uneven or sloped areas.
- Tfal: Keep children away from the stand during assembly. Do not allow children to climb on or play with the stand or mounted TV.
- Għodod: Use appropriate tools for assembly. Do not overtighten screws.
3. Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja li l-komponenti kollha huma preżenti u mhux imħassra qabel tibda l-assemblaġġ. Jekk xi partijiet huma neqsin jew imħassra, ikkuntattja l-appoġġ għall-klijenti.
- Bażi tal-ħġieġ ittemprat
- Kolonna ta 'Appoġġ
- Pjanċa tal-Immuntar tat-TV
- VESA Brackets (2 pieces)
- Hardware Kit (various screws, washers, spacers, nuts, non-slip feet, cable clips)
- Manwal ta' Istruzzjoni
4. Istruzzjonijiet tal-Assemblea
Follow these steps carefully to assemble your TV stand. It is recommended to have two people for certain steps, especially when mounting the TV.
Step 4.1: Attach Non-Slip Feet to the Glass Base
Carefully place the tempered glass base on a soft, clean surface to prevent scratches. Attach the provided non-slip feet to the designated spots on the underside of the glass base.
Figure 4.1: Tempered glass base with non-slip feet and security lock detail.
Step 4.2: Secure the Support Column to the Glass Base
Align the support column with the mounting holes on the glass base. Use the appropriate screws and washers from the hardware kit to securely fasten the column to the base. Ensure it is tight and stable.
Step 4.3: Attach the TV Mounting Plate to the Support Column
Connect the TV mounting plate to the top of the support column using the designated screws. This plate will hold the VESA brackets and your TV.
Step 4.4: Attach VESA Brackets to Your TV
Lay your TV screen-down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the two VESA brackets to the back of your TV, ensuring they are level and securely fastened. Do not overtighten.
Step 4.5: Mount the TV onto the Stand
With assistance, carefully lift your TV and hook the VESA brackets onto the TV mounting plate. Ensure the brackets are properly seated. Secure the TV to the mounting plate using the provided security lock screws or mechanisms. This prevents accidental dislodgement.
Figure 4.2: Detail of the security lock mechanism.
5. Istruzzjonijiet Operattivi (Aġġustamenti)
5.1: Aġġustament tal-Għoli
The FITUEYES TV stand offers 4 positions for height adjustment. To adjust the height, ensure the TV is securely mounted. Loosen the height adjustment screws on the support column, carefully raise or lower the TV to your desired viewing height, and then re-tighten the screws firmly to lock the position.
Figure 5.1: Illustration of the four height adjustment levels.
Figure 5.2: Detail of the height adjustment mechanism.
5.2: Funzjoni ta' Dawwar
The TV stand allows for an 80-degree swivel range (40 degrees left and 40 degrees right). To swivel your TV, gently grasp the sides of the TV and rotate it to the desired viewing angle. The swivel mechanism is designed for smooth movement.
Figure 5.3: The TV stand's swivel feature in action.
Figure 5.4: Detail of the swivel mechanism.
6. Ġestjoni tal-Kejbil
The support column features an integrated cable management system to keep your cables organized and out of sight. Route your power cords, HDMI cables, and other wires through the clips provided on the back of the column. This helps maintain a tidy appearance and prevents cable clutter.
Figure 6.1: Cable management in use.
Figure 6.2: Detail of cable management clips.
7. Manutenzjoni
- Tindif: Use a soft, dry cloth to clean the stand. For the tempered glass base, a glass cleaner can be used. Avoid abrasive cleaners or solvents.
- Kontrolli perjodiċi: Iċċekkja l-viti u l-konnessjonijiet kollha perjodikament biex tiżgura li jibqgħu ssikkati u siguri. Erġa' ssikka jekk meħtieġ.
- Ħsara: Jekk xi parti tal-istand issirilha l-ħsara, waqqaf l-użu u kkuntattja l-appoġġ għall-klijenti għal partijiet ta' sostituzzjoni jew parir.
8 Issolvi l-problemi
- TV Mhux Livell: Ensure the VESA brackets are attached evenly to the TV and properly seated on the mounting plate. Check that the stand is on a level surface.
- Il-Waqfa Tħossha Instabbli: Verify all assembly screws are tightened. Ensure the stand is placed on a flat, stable surface. Do not exceed the maximum weight capacity.
- Portijiet tat-TV Imblukkati: In some cases, the VESA brackets may partially block TV ports. Consider using right-angle adapters for cables if this occurs.
- Difficulty Swiveling: Ensure no cables are snagged or obstructing the swivel mechanism. The mechanism should move smoothly.
9. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | TT105202GB |
| Daqsijiet tat-TV Kompatibbli | 32 - 65 pulzieri |
| Kapaċità massima tal-piż | 88 lbs (40 kg) |
| Kompatibilità VESA | 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x400mm, 600x400mm |
| Medda li ddur | ±40 grad (80 grad b'kollox) |
| Aġġustament Għoli | 4-il pożizzjoni |
| Materjal | Metall, Ħġieġ ittemprat |
| Dimensjonijiet tal-Prodott (L x W x H) | 63.5 x 29.97 x 73.66 cm (approximate, varies with height setting) |
| Piż tal-oġġett | 7.01 kg |
Figure 9.1: Dimensional specifications and VESA compatibility.
Figure 9.2: VESA compatibility and weight capacity overview.
10. Garanzija u Appoġġ għall-Klijent
FITUEYES provides a garanzija ta 'sena for this product, covering manufacturing defects. For any questions regarding pre-order, installation, or product support, please contact our customer service team. Our friendly customer service is available to answer your inquiries within 24 hours.
For support, please visit the official FITUEYES webis-sit jew irreferi għall-informazzjoni ta' kuntatt ipprovduta mad-dokumentazzjoni tax-xiri tiegħek.
