1. Introduzzjoni
This manual provides essential instructions for the installation, maintenance, and safe use of your Ariston Carbon Filter Set. These filters are designed to purify air by absorbing odors and grease particles in compatible Ariston cooker hoods, ensuring a cleaner kitchen environment. Please read this manual thoroughly before installation and retain it for future reference.
2. Prodott Aktarview u l-Kontenut tal-Pakkett
Your package contains two (2) Ariston Carbon Filters, each measuring 145 x 30 mm. These filters are crucial for the recirculation mode of your cooker hood, trapping odors and grease.
Stampa 1: Two Ariston 145 x 30 mm carbon filters. This image displays two circular black carbon filters, each measuring 145 x 30 mm. They feature a central hub and a radial spoke design, designed for air purification in cooker hoods.
3. Compatible Cooker Hood Models
This carbon filter set is compatible with the following Ariston cooker hood models:
- AG80GY
- AG602MGY
- HBT6IX
- HBT9IX
- HDA6TIX
- HDA9TIX
- HDS9TIX/HA
- HE60.TIX
- HE90.TFIX
- HHE60FIX
- G80.1GY
- HO60TX/HA
- HE50TX/HA
- HR60.TIX/HA
- HR90.TIX/HA
- HDS6TIX/HA
Please verify your cooker hood model number before installation to ensure compatibility.
4. Istruzzjonijiet ta 'installazzjoni
Follow these steps to install or replace the carbon filters in your Ariston cooker hood. Always refer to your specific cooker hood's user manual for detailed instructions, as procedures may vary slightly by model.
- Is-Sigurtà l-Ewwel: Before beginning any installation or maintenance, ensure the cooker hood is completely disconnected from the main power supply.
- Aċċessa l-Kompartiment tal-Filtru: Open the grease filter grille or remove the metal grease filters to access the carbon filter compartment.
- Remove Old Filters (if applicable): If replacing old filters, carefully detach them. Carbon filters are typically secured by a central locking mechanism (twist-lock) or clips. Note their orientation for correct installation of the new filters.
- Installa Filtri Ġodda: Position the new carbon filters into their designated slots. Ensure they are correctly aligned.
- Secure Filters: Rotate the filters clockwise until they lock into place, or secure them with the clips, depending on your hood model. Ensure they are firmly seated and do not wobble.
- Erġa' arma: Reinstall the metal grease filters and close the grille.
- Irrestawra l-Enerġija: Reconnect the cooker hood to the main power supply.
Nota: Carbon filters are used for recirculation mode. If your hood is set up for external venting, carbon filters are not required.
5. Manutenzjoni u Sostituzzjoni
Carbon filters are consumable items and cannot be washed or regenerated. Their effectiveness diminishes over time as they absorb odors and grease.
- Frekwenza ta' Sostituzzjoni: For optimal performance, it is recommended to replace the carbon filters every 3 to 6 months, depending on the frequency of use and type of cooking. Heavy frying or frequent cooking may require more frequent replacement.
- Signs of Saturation: If you notice a decrease in odor absorption or an increase in cooking odors lingering in your kitchen, it is likely time to replace the filters.
- Rimi: Dispose of used carbon filters according to local waste disposal regulations.
6. Speċifikazzjonijiet
| Attribut | Dettall |
|---|---|
| Tip ta' Prodott | Carbon Filter Set (2 units) |
| Dimensjonijiet (kull filtru) | 145 mm (dijametru) x 30 mm (għoli) |
| Materjal | Karbonju Attivat |
| Apparati Kompatibbli | Ariston Cooker Hoods (specific models listed in Section 3) |
| Manifattur | Ariston |
| Dimensjonijiet tal-Pakkett | 14.4 x 14.2 x 6.2 ċm |
| Piż tal-Pakkett | 259.99 g |
7 Issolvi l-problemi
If you encounter issues after installing your new carbon filters, consider the following:
- Poor Odor Absorption:
- Ensure filters are correctly installed and securely locked in place.
- Check if the filters are new. Old or saturated filters will not absorb odors effectively.
- Verify that your cooker hood is operating in recirculation mode (if applicable).
- Storbju mhux tas-soltu:
- Ensure filters are properly seated and not obstructing the fan blades.
- Check for any loose components within the filter compartment.
If problems persist, consult your cooker hood's specific user manual or contact Ariston customer support.
8. Informazzjoni dwar is-Sigurtà
- Always disconnect the cooker hood from the power supply before installing, removing, or cleaning filters.
- Do not attempt to wash or clean carbon filters; they are designed for single use and must be replaced.
- Żomm il-materjali tal-ippakkjar 'il bogħod mit-tfal.
