1. Introduzzjoni
Thank you for choosing the Armor Stand Case for your Samsung Galaxy Tab A11 Plus or A9 Plus 11-inch tablet. This rugged case is designed to provide superior protection against drops, impacts, and dust, while offering convenient functionality with its built-in kickstand. Please read this manual carefully to ensure proper installation and use of your new tablet case.
2. Kompatibilità
This Armor Stand Case is specifically designed for the following Samsung Galaxy Tab 11-inch models:
- Samsung Galaxy Tab A11 Plus 11-inch: SM-X230, SM-X233, SM-X235, SM-X236B
- Samsung Galaxy Tab A9 Plus 11-inch: SM-X210, SM-X215, SM-X216, SM-X218
Important: Please verify your tablet model before installation.
3. Karatteristiċi ewlenin
- Protezzjoni b'ħafna saffi: Constructed with a soft silicone skin, a hard PC inner shell, and a hard plastic outer shell for comprehensive defense.
- Shockproof & Drop Resistance: Extra cushioning on all four corners absorbs impact from accidental drops.
- Camera & Screen Protection: Raised bezels prevent scratches and protect against facedown impacts.
- Kickstand inkorporat: Provides convenient hands-free viewf'orjentazzjoni orizzontali.
- Anti-Dust Design: Helps keep dust and debris away from your tablet's ports and buttons.
- Durable & Washable: Made from high-quality, long-lasting materials that are easy to clean.
4. Kontenut tal-Pakkett
- 1 x Armor Stand Case Cover
Note: Tablet PC and stylus pen are not included.
5. Gwida għall-Installazzjoni
The Armor Stand Case features a 3-layer design for maximum protection. Follow these steps to install your tablet:
- Disassemble the Case: Carefully separate the three layers of the case: the soft silicone skin, the hard PC inner shell, and the hard plastic outer shell. The hard plastic outer shell typically snaps onto the hard PC inner shell.
- Place Tablet in Inner Shell: Position your tablet into the hard PC inner shell, ensuring all edges and corners are properly aligned.
- Reassemble Outer Shell: Snap the hard plastic outer shell back onto the hard PC inner shell, making sure it clicks securely into place around the tablet.
- Apply Silicone Skin: Gently stretch and fit the soft silicone skin over the assembled hard shells and tablet. Ensure all cutouts for ports, buttons, and camera are correctly aligned and the silicone provides a snug fit.
6. Istruzzjonijiet Operattivi
Using the Built-in Kickstand:
Il-kickstand integrat jippermetti idejn ħielsa konvenjenti viewing. To deploy the kickstand:
- Sib il-kickstand fuq wara tal-kaxxa.
- Gently pull the kickstand outwards until it locks into an open position.
- Place your tablet on a flat surface in landscape orientation.
To retract the kickstand, push it back into its recess until it lies flush with the case.
7. Kura u Manutenzjoni
- Tindif: To clean the case, remove your tablet. Use a soft, damp cloth with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Tnixxif: Allow the case to air dry completely before re-installing your tablet.
- Ħażna: Meta ma tkunx qed tuża l-kaxxa, aħżenha f'post frisk u niexef 'il bogħod mix-xemx diretta biex tevita d-degradazzjoni tal-materjal.
8 Issolvi l-problemi
Case does not fit properly:
- Ivverifika l-Mudell: Double-check that your tablet model matches the compatible models listed in Section 2. Refer to Figure 1 for guidance on finding your tablet's model number.
- Installazzjoni mill-ġdid: Remove the tablet from the case and carefully re-install it, ensuring each layer is correctly aligned and snapped into place as described in Section 5.
9. Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Marka Kompatibbli | SAMSUNG |
| Kompatibilità tal-Mudell | Samsung Galaxy Tab A9 Plus 11inch, Galaxy Tab S6 Lite WLAN (Wifi) |
| Numru tal-Mudell | For Samsung Galaxy Tab A11 Plus 11 inch SM-X230 X233 X235 SM-X236B |
| Tip | Qoxra/Ġilda Protettiva |
| Materjal | Silicone + PC |
| Karatteristika | Shockproof, Drop resistance, Anti-Dust, Hard |
| Daqs tal-Laptop tal-Applikazzjoni | 11" |
| Tip ta' Mudell | Solidu |
| Stil | Moda |
| Tul | 11inch |
| Wisa' | 11inch |
| Batterija Inkluża | Nru |
| Kimika ta' tħassib kbir | Xejn |
10. Għajnuniet għall-Utenti
- Ensure all port covers (if present) are securely closed to maximize dust and splash protection when not in use.
- When using the kickstand, place the tablet on a stable, flat surface to prevent accidental tipping.
- Periodically check the case for any signs of wear or damage, especially after a drop, to ensure continued protection.
11. Garanzija u Appoġġ
For any questions, concerns, or support regarding your Armor Stand Case, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
