1. Prodott Aktarview
The TFSCLOIN SUN X27/X25 MAX series UV LED Nail Lamp is designed for professional and home use, offering efficient and fast curing for all types of UV gel nail polish. Featuring 81 dual light source (365 + 405 nm) LED beads, an intelligent auto sensor, and multiple timer settings, this lamp provides a comfortable and effective nail drying experience.
2. Kontenut tal-Pakkett
- 1 x dwiefer Lamp (SUN X23/X25/X26/X27 MAX model)
- 1 x Provvista ta 'Enerġija
- 1 x Manwal għall-Utent
3. Istruzzjonijiet ta' Setup
- Spakkja l-Apparat: Neħħi d-dwiefer bir-reqqaamp u l-aċċessorji kollha mill-imballaġġ.
- Attach Bottom Plate: Id-dwiefer lamp features a removable bottom plate for easy cleaning. Align the plate with the main unit and gently push it into place until it clicks securely.
- Qabbad l-Enerġija: Insert the power supply cable into the power port on the back of the nail lamp. Plug the power adapter into a suitable electrical outlet. The lamp supports various plug types (US, EU, UK) depending on the model purchased.
- Pjazzament: Place the nail lamp on a stable, flat surface. Ensure adequate ventilation around the device.
4. Istruzzjonijiet Operattivi
4.1 Power On/Off
- Id-dwiefer lamp features a smart auto sensor. When you place your hand or foot into the lamp, the infrared sensor will automatically activate the curing process.
- Removing your hand or foot will automatically turn off the lamp.
4.2 Issettjar tat-Tajmer
Il-lamp offers four preset timer settings for different curing needs. Select the appropriate time using the buttons on the top panel:
- 10s: Ideal for thin gel polish.
- 30s: Suitable for regular color gel polish.
- 60s: Recommended for dark color or thick gel polish.
- 99s (Low Heat Mode): Provides a painless curing experience, gradually increasing power to prevent heat spikes, especially useful for sensitive nails or thicker gel layers.
4.3 Curing Process
- Apply a thin, even layer of gel polish to your nails.
- Select the desired curing time using the timer buttons.
- Place your hand or foot fully into the lamp. Il-lamp se jibda awtomatikament.
- Once the timer finishes or you remove your hand/foot, the lamp se jintefa.
- Repeat for subsequent layers of gel polish as needed.
5. Manutenzjoni
5.1 Tindif
- Dejjem aqla l-apparat qabel it-tindif.
- The bottom plate is removable for easy cleaning. Gently pull it off to clean any spilled gel or debris.
- Imsaħ il-barra tal-lamp with a soft, dry cloth. For stubborn stains, a slightly damp Jista' jintuża drapp, u jiżgura li ma jidħol l-ebda likwidu fl-apparat.
- Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa.
5.2 Ħażna
- Aħżen id-dwiefer lamp f'post frisk u niexef 'il bogħod mid-dawl tax-xemx dirett u l-umdità.
- Żomm fejn ma jintlaħaqx mit-tfal.
6 Issolvi l-problemi
- Lamp ma jixgħelx: Ensure the power supply is securely connected to both the lamp and the electrical outlet. Check if the outlet is functioning.
- Gel not curing properly:
- Ensure you are using the correct timer setting for your specific gel polish type (e.g., longer time for dark/thick gels).
- Verify that your gel polish is compatible with UV/LED lamps.
- Apply gel in thin, even layers. Thick layers may not cure completely.
- Ensure your hand/foot is fully inserted into the lamp, covering all nails.
- Lamp feels warm: Il-lamp has an integrated smart temperature control chip to prevent overheating. Some warmth during operation is normal. If it becomes excessively hot or emits smoke, immediately unplug and discontinue use.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numri tal-Mudell | SUN X23MAX, SUN X25MAX, SUN X26MAX, SUN X27MAX |
| Lamp Żibeġ | 81 PCS |
| Sors tad-Dawl | Dual UV LED (365nm + 405nm) |
| Sors tal-Enerġija | Elettriku |
| Voltage | 100-240V |
| Materjal | ABS |
| Dimensjonijiet (L*W*H) | 230mm * 200mm * 105mm (9.06 pulzieri * 7.87 pulzieri * 4.13 pulzieri) |
| Piż | Madwar 450g |
| Ċertifikazzjoni | CE |
| Plug Types Supported | US, EU, UK (depending on model) |
8. Garanzija u Appoġġ
The manufacturer offers a 100% satisfaction guarantee. If you encounter any issues with your product, please contact the seller or manufacturer for assistance. Keep your purchase receipt as proof of purchase.
9. Għajnuniet għall-Utenti
- Optimal Curing: For best results, ensure your nails are centered under the LED lights. The 180-degree distribution of beads helps ensure even curing.
- Painless Mode: Utilize the 99s Low Heat Mode for a more comfortable experience, especially if you have sensitive nails or are curing builder gels that can cause heat spikes.
- Indafa: Regularly remove and clean the bottom plate to maintain hygiene and prevent gel residue buildup, which can affect performance.
- Informazzjoni dwar l-Enerġija: While a specific wattage is not provided, this is described as a 'super power' lamp designed for fast drying.
