MT Helmets Helmet

Overview
MT Helmets are designed to provide reliable head protection, comfort, and a stylish appearance for motorcycle riders. They feature a durable outer shell, impact-absorbing inner liner, secure fastening system, and comfortable interior padding. Depending on the model, they also offer efficient ventilation, a clear visor, and a removable, washable liner for convenient maintenance.
Components
- Visor
- Outer Shell
- Impact Absorbent Liner
- Comfort Liner
- Quick Release Double “D”
- Quick Release Micrometric Buckle

- Impact Absorbent Liner
- Comfort Liner
- Rubber Band
- Internal Sun Visor
- Outer Shell

Safety Instructions
Do not clean your helmet with petroleum products, solvents, benzene, thinners or abrasive cleaning products. Do not use your helmet if the shield is scratched. This can affect your vision, especially during night riding. Do not use dark or tinted visors with the marking “Daytime use only” when riding in the dark or poor visibility conditions. Do not attempt to remove, change or replace the shield while riding your motorcycle.
Please note
- NO helmet can protect you against all forms of impact.
- To ensure maximum safety the size of the helmet should be appropriate. It should be a close fit with no pressure points and no spaces. The fastening system must be firmly fastened under the chin.
- Do not modify the helmet or its components in any way; otherwise, there is a risk of weakening its structure and impairing its ability to absorb impact, thus jeopardising your safety. For the same reason, do not paint or apply stickers.
- After any impact, you should replace the helmet, even after minor impacts. Internal components may be damaged and not visible. Replace your helmet if its components are damaged. It is advisable to replace the helmet when it reaches 5 years old.
Helmet ideal choice
DMT Helmets offers a wide range of shells to help you choose the correct helmet for your riding needs. To find the correct size, use a tape measure around your head approximately 2 cm above your eyebrows and ears and take note of the measurement in centimetres. Once you have decided on your ideal helmet according to your measurements, try it on and ensure that it fits correctly. You should feel a positive pressure around your head without any tight spots.lf the helmet fits too loosely it may be rolled off your head in the event of an accident.
Care, cleaning and storage
- Careless use of the helmet may alter its performance. Do not sit on the helmet, or subject it to strong sunlight, and never drive with the helmet hanging from the closure system.
- You can clean your MT Helmet with soap and water. The interior removable lining can be washed by hand or in the washing machine with warm water (max.350C) and neutral soap. The lining should be left to ar dry, avoiding heat sources. Never use oils, petroleum products and/or chemical solvents on the helmet as they can damage the structure and components of the helmet
- The visor of the helmet should be kept clean and clear as far as possible, if it is scratched or vision through the visor is blurred the visor must be replaced. Clean your visor with a soft cloth, warm water and mild soap. Do not dry the visor on heat sources.
- Keep the helmet in a safe place when not in use. If it is to be left for a long time without using it keep it in its MT Helmet bag.
- FIuorescent and/or bright finishes fade over time and exposure to sunlight. This is normal and is not covered by warranty.
Documents / Resources
![]() | Helmet |
References
- User Manualmanual.tools
